3D Printing w/Bitshares

[kenCode]

Does it glow in the dark too? It looks like that same material..

[ISG3D]

I think it's time for a new hangout, we will have a lot to talk about  :D

We are certainly open to the idea of doing a "Bitshares Auction" where we could auction the 3D creation we did with big discount for Bitshares users.

So far Sam designed these things, and the inspiration is still there  8) :

http://www.isg3d.com/products/3d-printed-bitshares-phone-case

[fuzzy]

Maybe you can auction them off.

What if they got a delegate spot and used some of those funds to distribute stuff like this at a significant discount to the BitShares community?  Then we could hand these things out at meetups.  Maybe even get a "BitShares Award" for innovation in Blocktech and send it to those to people who build really awesome things to add them onto the BitShares chain?

[kenCode]

Maybe you can auction them off.

+5% I'm buyin' !!
also, paging cryptofresh @bitscape ??

[Pheonike]

Maybe you can auction them off.

[kenCode]

This is f*king awesome, I tweeted that one!
+5% +5% +5%

[ghost_of_the_internet]

That's awesome!

[ISG3D]

We have 3D printed the BitShares City, you can find some pictures here:

https://twitter.com/ISG3D/status/583461763317895168

[ISG3D]

This is sweet....

BitShares City.  Have you guys considered campaigning for a delegate slot and shipping things like this as gifts with some of the funds?

I will reach out to you privately on that matter since we need more information but we are very interested.

[ISG3D]

Thanks, we are actually 3D printing it on the live stream at the moment, it should be ready in 3-4h: http://isg3d.com/pages/live



https://twitter.com/ISG3D/status/583235279751876608

[fuzzy]

This is sweet....

BitShares City.  Have you guys considered campaigning for a delegate slot and shipping things like this as gifts with some of the funds? 

[38PTSWarrior]

Man, this is beautiful!! A little city and the height of the buildings is different. This is the best!

[ISG3D]

There you go guys, Sam is done 3D modeling this new project for BitShares. Thanks for the idea infovortice2013, this is looking very great. We are probably going to 3D print it tomorrow night, really excited by the final render!

https://twitter.com/SamISG3D/status/583193438046298112

[ISG3D]

3D modeling a new project for $BTS Bitshares

https://twitter.com/ISG3D/status/583160368849113088

[ISG3D]

We just made a 3D render for a BTS Bitshares Phone Case, it's 3D printing on the live stream at the moment!

http://isg3d.com/pages/live

can imagine this over earth like a complex of buildings
lol

Yeah I think you just gave us an idea for a nice design. We might try something cool with this idea in mind.

Spoiler alert, Sam is 3D modeling a new project at the moment for Bitshares.

[infovortice2013]

We just made a 3D render for a BTS Bitshares Phone Case, it's 3D printing on the live stream at the moment!

http://isg3d.com/pages/live

can imagine this over earth like a complex of buildings
lol

[fuzzy]

prusa 3d printer with largest print area.

https://www.3dprintersonlinestore.com/mega-prusa-gen-2-kit

Yes it's a great Prusa Kit at 29cm x 27cm x 20cm of Print volume. However, this is a Kit, this mean you have to build it yourself at this price :D (not assembled)

There are some great DIY kit like that on AliExpress for those who wants to learn 3D printing and have fun building their 3D printer.

It would be really cool to have a 3D printer.  All I know is you are already one of our best twitter marketers.  An entire army of 3d printers would likely get a lot of eyes on for one of the perfect  demographics for bitshares and that isn't even talking about the amazing agricultural and sustainability project.

[ISG3D]

prusa 3d printer with largest print area.

https://www.3dprintersonlinestore.com/mega-prusa-gen-2-kit

Yes it's a great Prusa Kit at 29cm x 27cm x 20cm of Print volume. However, this is a Kit, this mean you have to build it yourself at this price :D (not assembled)

There are some great DIY kit like that on AliExpress for those who wants to learn 3D printing and have fun building their 3D printer.

[josephfrancis]

prusa 3d printer with largest print area.

https://www.3dprintersonlinestore.com/mega-prusa-gen-2-kit

[ISG3D]

We just made a 3D render for a BTS Bitshares Phone Case, it's 3D printing on the live stream at the moment!

http://isg3d.com/pages/live

[ISG3D]

Congratulations, you just made the Puppies thread on bitcointalk.

https://bitcointalk.org/index.php?topic=940298.msg10856077#msg10856077

Thanks for sharing Stan! By the way we just dropped the price of shipping to 10$ worldwide!

[Stan]

Congratulations, you just made the Puppies thread on bitcointalk.

https://bitcointalk.org/index.php?topic=940298.msg10856077#msg10856077

[ISG3D]

New BTS Bitshares Product on the 3D printing webstore http://isg3d.com/products/3d-printed-bts-bitshares-bar !

We accept Bitshares and BITUSD!

[ISG3D]

Nice,  I will check this out for sure, thanks.

In the meantime, enjoy your day BTS Bitshares, we'll be back with some nice stuff next week.

[kenCode]

I love Shapeshift too, I use it daily, but Metaexchange use helps feed back into the bts ecosystem.

Check this out:
https://metaexchange.info/apiDocs

You will probably be able to offer a lot more of the BitAssets via the above api too, quicker than you would with Shapeshift.

[ISG3D]

Right now we are accepting Bitshares and BITUSD through ShapeShift. We are pretty close with the guys at ShapeShift and I was wondering if you guys intended to push BITGold, BITCad, BITCNY, etc. with Shapeshift? It would be a pleasure to drop some kind words on it.

We will try to upload the 3D Printed Bitshares Bar on the webstore www.ISG3D.com and more BTS promotional items.

[kenCode]

all over it. :)

[fuzzy]

Paging Roadscape and Jsidhu.  We might have someone who will be interested in BitShares Shopping Cart implementation!

Oh man that'd be sweet, mass adoption thru ecommerce integrations  +5% +5% +5%

Well you know ken....that point is valid for your project too ;)

[kenCode]

Paging Roadscape and Jsidhu.  We might have someone who will be interested in BitShares Shopping Cart implementation!

Oh man that'd be sweet, mass adoption thru ecommerce integrations  +5% +5% +5%

[TurkeyLeg]

This is some pretty cool stuff. The link to the live stream was rad as well.  +5%  :D

[ISG3D]

Looks nice.

How about some BitShares poker Chips!

Thanks. So far we got, Keyring, Poker Chips, Bubblehead.... Great ideas, keep em' coming we are writing them down.

By the way, this was the process of 3D printing the Bitshares Bar:

https://twitter.com/ISG3D/status/578997805542424576

1- Make the 3D model on Tinkercad.com, a free software very easy-to-use.



2 - Choose the color, we decided to go with the White PLA, we're waiting for a light blue that could fit well with Bitshares.



3 - Start the 3D printing job after we chose our settings like bed temperature, fan speed, extruder temperature, etc.



4 - Wait 3-4h and there you go. We actually started the 3D printing job while we were sleeping.

[Pheonike]

Looks nice.

How about some BitShares poker Chips!

[ISG3D]

We already worked on the 3D render, it's looking good, we will try to 3D print something later tonight!

https://twitter.com/ISG3D/status/578412945811591168

By the way, the 3D printing job is done and I really like the finish, tell me what you think!

https://twitter.com/ISG3D/status/578985863385899008

[ISG3D]

I will check if its possible for the bubble head, but I know we can 3D print a face and it's looking pretty good.

Here we 3D scanned and 3D printed some members of the team (the 3D model was not well done because it is scanned with Kinect)



And for an example, this is a nice 3d model of Vladimir Putin, the 3D printed result is much more better, because of the 3D render.



We will see what we can do for Bytemaster bubblehead.

[infovortice2013]

keyrings should be good to.

Yes actually I had something like that in mind: https://twitter.com/ISG3D/status/576344404195164162



Not sure if thats what you were talking about, this is one idea, I think we all know there are a lot of possibilites with 3D printing.

We could put Bitshares logo in the middle, and 3D print it in Blue.

yeah i will buy !

to make 3d heads from 2d photos or draws is good software called facegen modeller   ;)

[JA]

Could you print a Bytemaster Bubblehead?  :D

[fuzzy]

Paging Roadscape and Jsidhu.  We might have someone who will be interested in BitShares Shopping Cart implementation!

[38PTSWarrior]

Nice, thanks for the update

[ISG3D]

Cool

Thanks, its now 3D printing the logo, its looking good.

[38PTSWarrior]

Cool

[ISG3D]

Nice 3D model of Bitshares from our designer, a teaser of things to come with Bitshares!



The 3D model is actually 3D printing right now on our live stream: http://isg3d.com/pages/live

We will try to think of interesting way to use the BitShares logo in the next few days, the printing job will last for 2-3h, don't hesitate to drop by!



(Click on the picture to join the live stream!)

[ISG3D]

keyrings should be good to.

Yes actually I had something like that in mind: https://twitter.com/ISG3D/status/576344404195164162



Not sure if thats what you were talking about, this is one idea, I think we all know there are a lot of possibilites with 3D printing.

We could put Bitshares logo in the middle, and 3D print it in Blue.

[infovortice2013]

keyrings should be good to.

[CLains]

Very cool! :D

[fuzzy]

I really enjoyed the hangout last Sunday, it was great hearing from you Samuel.

I posted a question in the hangout thread (https://bitsharestalk.org/index.php?topic=14946.0) I hope you'll answer. I'm very curious!

Hey, its Matt right now, I just told Sam he will try to answer as soon as possible, thanks!

We have the technology to build it!  Mwahaha! ;)

[ISG3D]

I really enjoyed the hangout last Sunday, it was great hearing from you Samuel.

I posted a question in the hangout thread (https://bitsharestalk.org/index.php?topic=14946.0) I hope you'll answer. I'm very curious!

Hey, its Matt right now, I just told Sam he will try to answer as soon as possible, thanks!

[Thom]

I really enjoyed the hangout last Sunday, it was great hearing from you Samuel.

I posted a question in the hangout thread (https://bitsharestalk.org/index.php?topic=14946.0) I hope you'll answer. I'm very curious!

[ISG3D]

We already worked on the 3D render, it's looking good, we will try to 3D print something later tonight!

https://twitter.com/ISG3D/status/578412945811591168

[BunkerChainLabs-DataSecurityNode]

I would go for a keychain for sure.

Apple products are rather specific.. I'm an Android fan myself.

[ISG3D]

Hey guys, we are 3D printing startup www.ISG3D.com working with many cryptocurrencies, we are currently accepting BitUSD and Bitshares. We recently started getting involved with Bitshares and we were invited for the Bitshares hangout last week: http://beyondbitcoinshow.com/hangout-with-samuel-from-isg3d/

Right now, we are working on a project to make a line of 3D printed Phone Case, and I had the idea to make one for Bitshares.

Here is the type of case we made for Bitcoin:



I was wondering if that logo was great to use for a 3D render, once we make the 3D render, we can use it to put on iPad stand, iPhone case, keychain, promotional items, etc.



We are looking forward for more collaboration with the BitShares community!