[ANN] [0% Fee] Extasie MMC Pool! Needs more of your CPU power! NEW SERVER

[earthbound]

Anyway, anyone with problems please send me a PM, thanks

I have sent you an email and one previous PM. I also posted a description of my problem in this thread. You did not respond to any of these messages. I have now sent you another PM.

As far as I'm concerned, this fella is a bandit who has run off with my money. Can't reach the web site anymore. Can't reach support. Can't access funds.

[earthbound]

Anyway, anyone with problems please send me a PM, thanks

I have sent you an email and one previous PM. I also posted a description of my problem in this thread. You did not respond to any of these messages. I have now sent you another PM.

[yvg1900]

Unfortunately, I could not test your pool, so did not include it in default config of newly released yam M7j.

Btw, if you are using getwork, it shall work.

I will check it out later and will add it to config with the next release, but the pool shall work stable, otherwise it is impossible to recomment it to people.

yvg1900

[pulsarz]

Restarted the server, didn't notice it was down..

Anyway, anyone with problems please send me a PM, thanks

[yvg1900]

Was trying to sign up, but somehow site did not accept my (long) password at login stage, and after using "Forgot password" feature account became locked, and there is no option to contact support.

This issue holding me from adding support for this pool to my upcoming miner for MMC.

yvg1900

[Tarka]

Ignore me (y'all did anyway), I was just being impatient. Everything now works fine  :)

[Tarka]

I'm trying to help by joining this but wonder if there's an issue with the OSX MMCMiner? I've checked, double-checked and triple-checked my username and password but I keep getting a 401 error:

[20:24:33] HTTP request failed: The requested URL returned error: 401
[20:24:33] json_rpc_call failed, retry after 10 seconds

Any idea or help appreciated  :)

[Slait]

There is an error.
I have multiple computers connected to and do not see their stats

[earthbound]

pulsarz, I've created a second account, but some shares from my inaccessible account remain at your pool. Just flipping send me that balance and delete the account, please.

Meanwhile, since your miner support sucks eggs, I think I'm moving on . . .

[earthbound]

Why is my hash rate 30% lower? I have 32 combined hpm and it only indicates 20.2 hpm on the dashboard.

That's the difference between the hpm generated by your equipment versus how many of those hpm are valid results (or submitted to the pool). Your equipment tells you how many hpm you're generating; the pool is telling you how many of those turn out to be valid shares.

[Delinquency]

Why is my hash rate 30% lower? I have 32 combined hpm and it only indicates 20.2 hpm on the dashboard.

[earthbound]

pulsarz,

If you're the admin of this pool, I need your help with my account, there, please. I described the situation here --

https://bitsharestalk.org/index.php?topic=1658.msg20282#msg20282

-- but I'll just copy that message here (heavily abridged):

I joined your pool, but neglected to write down the PIN for my account (without which I can't set a withdrawal address or donation percent ;)

It seems your pool doesn't yet have an account or PIN recovery mechanism. It also locked me out after my three incorrect PIN guesses. I can't access my account at all, but I mined at it for a few days. My forum profile here allows you to email me. Please reactivate my pool account (it has the same display/username I have here), and hard reset (manually code) my PIN, and email me the new PIN, so that I can log in and change my account settings.

Thanks!

BUMP

[foolsh]

Nothing but rejects so far, I'll mine til I wake back up and see if/what anything changes.

Nicely done with the MPOS pool.

138 rejected, sorry moving on to another pool.

Cheers

[progmac]

i'm on this pool and everything is being rejected. very frustrating

[foolsh]

Nothing but rejects so far, I'll mine til I wake back up and see if/what anything changes.

Nicely done with the MPOS pool.

[earthbound]

pulsarz,

If you're the admin of this pool, I need your help with my account, there, please. I described the situation here --

https://bitsharestalk.org/index.php?topic=1658.msg20282#msg20282

-- but I'll just copy that message here (heavily abridged):

I joined your pool, but neglected to write down the PIN for my account (without which I can't set a withdrawal address or donation percent ;)

It seems your pool doesn't yet have an account or PIN recovery mechanism. It also locked me out after my three incorrect PIN guesses. I can't access my account at all, but I mined at it for a few days. My forum profile here allows you to email me. Please reactivate my pool account (it has the same display/username I have here), and hard reset (manually code) my PIN, and email me the new PIN, so that I can log in and change my account settings.

Thanks!

[pulsarz]

For people that are having problems .. I found the problem. But I'm in the process of switching everything to a much better server ;) Switch will happen in 3-4 hours and should be able to handle a LOT more miners.

Edit:
While the DNS is still propagating, you can connect your miners (and view the site) at http://37.187.93.112

[Chronos24]

I rented a server and I've been trying connect it to your pool but I get the same error as the poster above me. Any ideas ?

HTTP request failed: Recv failure: Connection reset by peer
json_rpc_call failed, retry after 1 seconds

Never mind :) It is working fine now.  8)

[pinwc4]

I am running into trouble overnight as well.  I have some workers still going but any that I try to reconnect from fail.  About half of mine failed overnight and they all get errors like this:

Code Select Expand

[16:47:03] HTTP request failed: Recv failure: Connection reset by peer
[16:47:03] json_rpc_call failed, retry after 1 seconds


Since I can not get those to reconnect I am switching them to a different pool for now.  I will leave the working ones alone since they seem to still be submitting work just fine.

[overclock]

I have created a worker before of course.

The full command was and is the same that posted s4l1h, before there wasn't debug at the end, now I added it to the command but I still get error 403.

Only difference apart from worker name and password is that I have 4 threads.

I will return to the other pool, maybe will try again in the future.

Thank you for your help, was very appreciated. :)

[hayer]

Added debug, now I get error 403 access forbidden.

I don't understand what is wrong.

You make a mistake . You should create a woker first.

[s4l1h]

Added debug, now I get error 403 access forbidden.

I don't understand what is wrong.

You can write full command?

403 is auth error.

[overclock]

Added debug, now I get error 403 access forbidden.

I don't understand what is wrong.

[s4l1h]

Hi

Just registered on this pool.

I'm trying to connect to the pool but no responses at all.

Checked everything; worker name and pass are ok but no signs.

start minerd with debug mode. --debug

Eg: minerd --url http://extasie.net:8337/ --user Weblogin.Worker --pass WorkerPassword --threads 8 --debug

[overclock]

Hi

Just registered on this pool.

I'm trying to connect to the pool but no responses at all.

Checked everything; worker name and pass are ok but no signs.

[drowningfish]

Question

How long before I start seeing transactions occur?

Disregard.

[hayer]

Hi,Guy

Please check my account ! it is locked.

[Stalast]

Hi, the pool seems to be working great, but I have a question. Is there a fee for the automatic payout?

[pinwc4]

Bonus is paid out of my own pocket.

Bonus received.  Your generosity is appreciated.

Thanks

[pulsarz]

Bonus is paid out of my own pocket.

[TiGei99]

To lure some more miners over .. there is now a 20MMC bonus for the block finder!

is that 20MMC taken from the other pool miners or from your fee?

How should this work from fees? At the moment the block reward is 252.7 MMC.  1.5% fee are 3.7905 MMC for pool owner for each new block found by the pool.
3.7905 < 20 ... so I don't think it can be sold from fee

[Delinquency]

To lure some more miners over .. there is now a 20MMC bonus for the block finder!

is that 20MMC taken from the other pool miners or from your fee?

[pulsarz]

To lure some more miners over .. there is now a 20MMC bonus for the block finder!

[pulsarz]

Is there an issue reporting the current hashrate?  Because my CPU tells me I am at ~ 3.5 h/m but the extasie site reports me at ~ 1 and going down.  When I look at my workers it says I'm not active at all.  I have 3 cloud servers also pointed there.  I should have at least something to show for it.   :)

Speed calculations are still off .. I'll look into it. But it's only a display bug, all the shares are correctly credited ;)

Also "fixed" the payout problem, blocks on the pool confirmed before the blocks confirms in the wallet .. I added some MMC as a buffer, everything is properly working now.

Just so we're clear:  I'm talking about the Dashboard graphic (I can tell the pool payouts are off - and the workers are reporting at khs/hr).  When I point my miner from my desktop CPU to your pool it starts out slowly increasing rate until it's close to what my minerd output tells me (~3.5 h/m).  But after a while, like an hour or so, the graphic shows my hashrate decreasing slowly to zero.  If I quit my miner and restart it, it slowly increases, like it should.  The question is: is this a graphic glitch on your end or is there something going wrong on my end?  My CPU shows pretty solid and steady usage as seen from the task manager, and the minerd output shows a pretty consistent 3.5 h/m.  I'm trying to figure out why there's so much variance in the dashboard reporting.  If it's a WIP, that's cool.  Just want to be sure.

Thanks.

Pool payouts are correct. But the speed only decreases and never goes back up ? That's the first time I hear that.

[badbonez]

Is there an issue reporting the current hashrate?  Because my CPU tells me I am at ~ 3.5 h/m but the extasie site reports me at ~ 1 and going down.  When I look at my workers it says I'm not active at all.  I have 3 cloud servers also pointed there.  I should have at least something to show for it.   :)

Speed calculations are still off .. I'll look into it. But it's only a display bug, all the shares are correctly credited ;)

Also "fixed" the payout problem, blocks on the pool confirmed before the blocks confirms in the wallet .. I added some MMC as a buffer, everything is properly working now.

Just so we're clear:  I'm talking about the Dashboard graphic (I can tell the pool payouts are off - and the workers are reporting at khs/hr).  When I point my miner from my desktop CPU to your pool it starts out slowly increasing rate until it's close to what my minerd output tells me (~3.5 h/m).  But after a while, like an hour or so, the graphic shows my hashrate decreasing slowly to zero.  If I quit my miner and restart it, it slowly increases, like it should.  The question is: is this a graphic glitch on your end or is there something going wrong on my end?  My CPU shows pretty solid and steady usage as seen from the task manager, and the minerd output shows a pretty consistent 3.5 h/m.  I'm trying to figure out why there's so much variance in the dashboard reporting.  If it's a WIP, that's cool.  Just want to be sure.

Thanks.

[pulsarz]

Is there an issue reporting the current hashrate?  Because my CPU tells me I am at ~ 3.5 h/m but the extasie site reports me at ~ 1 and going down.  When I look at my workers it says I'm not active at all.  I have 3 cloud servers also pointed there.  I should have at least something to show for it.   :)

Speed calculations are still off .. I'll look into it. But it's only a display bug, all the shares are correctly credited ;)

Also "fixed" the payout problem, blocks on the pool confirmed before the blocks confirms in the wallet .. I added some MMC as a buffer, everything is properly working now.

[badbonez]

Is there an issue reporting the current hashrate?  Because my CPU tells me I am at ~ 3.5 h/m but the extasie site reports me at ~ 1 and going down.  When I look at my workers it says I'm not active at all.  I have 3 cloud servers also pointed there.  I should have at least something to show for it.   :)

[kbhutto]

3rd block! up to 685 and climbing. more power!  ???

Your hashpower is impressive man. You are #1 on pool :)

[mavisjames]

3rd block! up to 685 and climbing. more power!  ???

[belltown]

Added link to your pool on memorycoin.info I hope you get more CPU power

[KillerByte]

need more power. mmcpool smoking us. lol 8)

mmcpool should really raise the fee, he would just get richer and it would help all of us smaller pool operators out, and the network for that matter :) its a win win.

[mavisjames]

need more power. mmcpool smoking us. lol 8)

[mavisjames]

I'm in. lets go

[pulsarz]

Currently I cant pay out. My balance more than 1 MCC.

It worked now. Auto payout works perfectly, there might be a problem with manual but just set the threshold and your mmc address and they will be sent.

Second block has just been found! ;)

[neisseria]

i'm here too.
we need more power!

[hayer]

Currently I cant pay out. My balance more than 1 MCC.

[Atrides]

After registration: "Unable to login: Invalid username or password"
If I click on password reminder: "Unable to send mail to your address" (gmail)

[emre]

switched to this pool. so far looking good.

we need more hashpower though. no block found for like 5 hours. :/

[Delinquency]

Thank you for the pool! I'm trying it out now and it seems to be working well!

Wow, we just found our first block at just 6% of the estimated shares .. No, thank you Chronos24! :)
PM me your mmc address and I'll send you a bonus, just because I feel like it ;)

Fee will be 1.5% from now on.

This is on the miner-

Are 403 errors normal?

On the site or miner ?

That should only happen if the user & pass aren't correct really.

[pulsarz]

Thank you for the pool! I'm trying it out now and it seems to be working well!

Wow, we just found our first block at just 6% of the estimated shares .. No, thank you Chronos24! :)
PM me your mmc address and I'll send you a bonus, just because I feel like it ;)

Fee will be 1.5% from now on.

Are 403 errors normal?

On the site or miner ?

That should only happen if the user & pass aren't correct really.

[Delinquency]

Thank you for the pool! I'm trying it out now and it seems to be working well!

Wow, we just found our first block at just 6% of the estimated shares .. No, thank you Chronos24! :)
PM me your mmc address and I'll send you a bonus, just because I feel like it ;)

Fee will be 1.5% from now on.

Are 403 errors normal?

[pulsarz]

Thank you for the pool! I'm trying it out now and it seems to be working well!

Wow, we just found our first block at just 6% of the estimated shares .. No, thank you Chronos24! :)
PM me your mmc address and I'll send you a bonus, just because I feel like it ;)

Fee will be 1.5% from now on.

[Chronos24]

Thank you for the pool! I'm trying it out now and it seems to be working well!

[pulsarz]

Speed calculations are fixed. Should be somewhat accurate now.
Average speed is based on the amount of shares submitted in the last 20 minutes.

[s4l1h]

I get these every time I run cpuminer

[2013-12-28 01:09:51] thread 3: 4 hashes, 1.97 khash/s
[2013-12-28 01:10:07] JSON-RPC call failed: {
   "message": "upstream RPC error",
   "code": -4
}
[2013-12-28 01:10:07] submit_upstream_work json_rpc_call failed
[2013-12-28 01:10:07] ...retry after 30 seconds

cpuminer not working.you need mmcminer.

What is you connect string?

[pulsarz]

I get these every time I run cpuminer

[2013-12-28 01:09:51] thread 3: 4 hashes, 1.97 khash/s
[2013-12-28 01:10:07] JSON-RPC call failed: {
   "message": "upstream RPC error",
   "code": -4
}
[2013-12-28 01:10:07] submit_upstream_work json_rpc_call failed
[2013-12-28 01:10:07] ...retry after 30 seconds

You're using http://dl.mmcpool.com/mmcminer-win64.zip right ? I should probably add that to the site.

[arcke]

I get these every time I run cpuminer

[2013-12-28 01:09:51] thread 3: 4 hashes, 1.97 khash/s
[2013-12-28 01:10:07] JSON-RPC call failed: {
   "message": "upstream RPC error",
   "code": -4
}
[2013-12-28 01:10:07] submit_upstream_work json_rpc_call failed
[2013-12-28 01:10:07] ...retry after 30 seconds

[pulsarz]

I still to work on pushpool from many times already, you sure your pool work right ?

How have you fix the hash for be right on "RC", "hash32[7]" and "hash[27]" checks ? If you are not do it (simple bypass), you can still to search a blocks for all your life :-)




FaSan

Yes, I have.

[pulsarz]

Using CPUminer I am unable to connect.  My settings are:

Code Select Expand

"minerd.exe" -o stratum+tcp://extasie.net:3333 -O user.worker:password --threads=8

Do I have this wrong?

Thanks.

Use
Minerd.exe --url http://extasie.net:8337/ --user user.worker --pass workerpassword --threads 8

[badbonez]

Using CPUminer I am unable to connect.  My settings are:

Code Select Expand

"minerd.exe" -o stratum+tcp://extasie.net:3333 -O user.worker:password --threads=8

Do I have this wrong?

Thanks.

[FaSan]

I still to work on pushpool from many times already, you sure your pool work right ?

How have you fix the hash for be right on "RC", "hash32[7]" and "hash[27]" checks ? If you are not do it (simple bypass), you can still to search a blocks for all your life :-)




FaSan

[s4l1h]

I am tested this pool in beta good working.

[pulsarz]

A new MMC pool based on pushpool and MPOS! 1.5% fee using PPLNS.
The pushpool modifications are done by myself, planning to open-source it.

Home: http://extasie.net/
Connect info: http://extasie.net:8337/

IRC Channel: #extasie on freenode

Getting Started: http://extasie.net/index.php?page=gettingstarted

0% Fee for the next 20 blocks!