Main Menu

AMD OpenCL Momentum miner

Started by NaN, January 26, 2014, 08:41:40 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 ... 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 ... 62
User actions

NaN

#254
February 11, 2014, 06:39:24 AM
To run the miner on all four cards you have to use -t 0,0,1,1,2,2,3,3. additionally you could add -a 1, which should be faster than -a 0 (which are the defaults) on  7970. There is no option "a".

visterln

#253
February 11, 2014, 06:33:14 AM
Quote from: visterln on February 11, 2014, 06:14:26 AM
Quote from: NaN on February 11, 2014, 05:39:06 AM
Nice! So Linux is indeed faster than Windows for R9 290(X) cards.

Interestingly, I used-t 0 is the speed of CPM 2380, with the-t 0,0 is CPM 2980, 7970 single card default frequency.
Why is this so?

used -t 0 a 1 cpm 2380
used -t 0,0 a1 cpm 2920
used -t 0,0,0 a1 cpm 300

7970 925/1250 win7 64bit singe.

But this will set the speed multi-card declined 4 280x set-t 0,0,1,1 10200 from 11400 down to why there is a single card and multi-card upgrade will fall?

nanaya

#252
February 11, 2014, 06:16:10 AM
Quote from: wsnnwa on February 11, 2014, 05:30:28 AM
Wow that took forever, damn kernel issues followed with power issues....

Anyway, here are my Ubuntu results. R9 290X (1040/1250)

GPU 1 - [STATS] 2014-Feb-11 00:27:11 | 4153.40 c/m | 16.60 sh/m | VL: 119 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)

GPU 2 - [STATS] 2014-Feb-11 00:21:54 | 4237.20 c/m | 16.20 sh/m | VL: 26 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)

Decided to run one command line on each GPU with 2 threads each just to measure individual performance. I'll run  -t 0,0,1,1 next.

This is a 1000cpm change over my Win7.64 Mining rig with the same specs.

Thanks a lot NaN!!

I'll send you something tomorrow :D

wow，so fast！ :o

visterln

#251
February 11, 2014, 06:14:26 AM
Quote from: NaN on February 11, 2014, 05:39:06 AM
Nice! So Linux is indeed faster than Windows for R9 290(X) cards.

Interestingly, I used-t 0 is the speed of CPM 2380, with the-t 0,0 is CPM 2980, 7970 single card default frequency.
Why is this so?

lty616

#250
February 11, 2014, 06:12:25 AM
Please try to release Nvidia edition with equivalent cpm ASAP~~~ thanks a lot. My GTX690 only has 280x speed in ptsGPUz, come on. T.T

NaN

#249
February 11, 2014, 05:39:06 AM
Nice! So Linux is indeed faster than Windows for R9 290(X) cards.

wsnnwa

#248
February 11, 2014, 05:30:28 AM Last Edit: February 11, 2014, 05:34:27 AM by wsnnwa
Wow that took forever, damn kernel issues followed with power issues....

Anyway, here are my Ubuntu results. R9 290X (1040/1250)

GPU 1 - [STATS] 2014-Feb-11 00:27:11 | 4153.40 c/m | 16.60 sh/m | VL: 119 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)

GPU 2 - [STATS] 2014-Feb-11 00:21:54 | 4237.20 c/m | 16.20 sh/m | VL: 26 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)

Decided to run one command line on each GPU with 2 threads each just to measure individual performance. I'll run  -t 0,0,1,1 next.

This is a 1000cpm change over my Win7.64 Mining rig with the same specs.

Thanks a lot NaN!!

I'll send you something tomorrow :D

Darkbane

#247
February 11, 2014, 04:37:39 AM
Quote from: NaN on February 11, 2014, 04:33:09 AM
Quote from: Darkbane on February 11, 2014, 04:25:03 AM
little off topic... just wanted to say I sold my first PTS today... I feel kinda giddy... tee-hee...

was quite a bit of a waiting process though, transactions sure weren't fast at the exchange, I got to 50 confirmations before they even recognized it almost 3 hours later, and thats with a transactions fee... usually it takes me under 10min when I send PTS to an individual and they confirm it... is this the typical exchange experience? (cryptsy - I've been reading horror stories)
bter.com worked well until a few days ago when they disabled PTS deposit without any notice. No idea whether I can access my coins in the near future... Now I'm using cryptsy and your donation arrived but I checked this the first time a few hours after your donation. One of my friends is using cryptsy since two month without issues. Anyhow you should be careful with any exchange and the fuckup at mt. gox is a good example. Don't risk too much.

yeah I'm terrified to send a large amount and do a big cash out... thats why I did a 1 coin test... but I always fear when I do the real move thats when it won't work after all I have read... if only there was a return policy with transferring coins... I'm not sure what is the bigger risk... buying mining equipment, or transferring to an exchange...

NaN

#246
February 11, 2014, 04:33:09 AM
Quote from: Darkbane on February 11, 2014, 04:25:03 AM
little off topic... just wanted to say I sold my first PTS today... I feel kinda giddy... tee-hee...

was quite a bit of a waiting process though, transactions sure weren't fast at the exchange, I got to 50 confirmations before they even recognized it almost 3 hours later, and thats with a transactions fee... usually it takes me under 10min when I send PTS to an individual and they confirm it... is this the typical exchange experience? (cryptsy - I've been reading horror stories)
bter.com worked well until a few days ago when they disabled PTS deposit without any notice. No idea whether I can access my coins in the near future... Now I'm using cryptsy and your donation arrived but I checked this the first time a few hours after your donation. One of my friends is using cryptsy since two month without issues. Anyhow you should be careful with any exchange and the fuckup at mt. gox is a good example. Don't risk too much.

Darkbane

#245
February 11, 2014, 04:25:03 AM
little off topic... just wanted to say I sold my first PTS today... I feel kinda giddy... tee-hee...

was quite a bit of a waiting process though, transactions sure weren't fast at the exchange, I got to 50 confirmations before they even recognized it almost 3 hours later, and thats with a transactions fee... usually it takes me under 10min when I send PTS to an individual and they confirm it... is this the typical exchange experience? (cryptsy - I've been reading horror stories)

scrazy

#244
February 11, 2014, 02:51:26 AM
Quote from: NaN on February 09, 2014, 04:03:08 PM
Quote from: scrazy on February 09, 2014, 03:55:13 PM
version should be 13.25.5
If I am correct this should be the fglrx driver of Catalyst 12.9. This is too old
Hi Nan:
Just upgrade to 14.1 Beta , still not working  :( (cgminer works fine)
http://support.amd.com/en-us/kb-articles/Pages/latest-linux-beta-driver.aspx

Regards

beatfried

#243
February 11, 2014, 12:44:39 AM
Hi :)

So, I got a little Problem...

Code Select
C:\clpts-v0.1.4_win_x86-64>clpts_x86-64.exe PcGVSa1S5K7bYjL9BaBaEYzRdFHTwRW6PW -
t 2 -a 0
*****************************************************************************
** clpts - OpenCL PTS Pool Miner v0.1.4
** by NaN - based on ptsminer.
** If you like this software, please consider sending tips to: [email protected]
** PTS:  PtLx9kDLTXtR1ae3u7naXLPeGjjHZ1PGoR
** BTC:  1AumJ5uzz1nuER7pBA6Bh4gNusaxhN85rc
** Your donations will encourage further optimization and development
**
** press CTRL+C to exit
*****************************************************************************
Vendor of used platform (#1 / 1): Advanced Micro Devices, Inc.
Name of device #1 / 3 (deviceID 0): Cypress
Name of device #2 / 3 (deviceID 1): Cypress
Name of device #3 / 3 (deviceID 2): Hawaii


spawning 1 worker thread(s)
[WORKER0] Hello, World!
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdo
pencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdo
pencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdo
pencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdo
pencl' and 'amdil-pc-amdopencl'
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!


Messages during compilation of program for device 'Hawaii':

LOOP UNROLL: pragma unroll (line 162)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 112)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 179)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 169)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 222)
    Unrolled as requested!

[MASTER] 2014-Feb-11 01:32:40 | work received | sharetarget: 00ffffffffffffffffffffffffffffffffffffffffffffffffffffffbeefde4d
[WORKER0] share found: 24033445 <-> 48762637 #1 (120) @ 1392078802
[STATS] 2014-Feb-11 01:32:50 | 756.00 c/m | 6.00 sh/m | VL: 1 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER0] share found: 50185798 <-> 59691287 #2 (212) @ 1392078835
[STATS] 2014-Feb-11 01:33:00 | 816.00 c/m | 6.00 sh/m | VL: 2 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER0] share found: 47562799 <-> 47929195 #3 (322) @ 1392078875
[WORKER0] share found: 15232725 <-> 38644667 #4 (410) @ 1392078907
[STATS] 2014-Feb-11 01:33:10 | 832.00 c/m | 8.00 sh/m | VL: 4 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)

Thats everything I get out of a R9 290. I'm a little disappointed.. :\

This is the result with one core of my 5970:
Code Select
C:\clpts-v0.1.4_win_x86-64>clpts_x86-64.exe PcGVSa1S5K7bYjL9BaBaEYzRdFHTwRW6PW -t 0 -a 0
*****************************************************************************
** clpts - OpenCL PTS Pool Miner v0.1.4
** by NaN - based on ptsminer.
** If you like this software, please consider sending tips to: [email protected]
** PTS:  PtLx9kDLTXtR1ae3u7naXLPeGjjHZ1PGoR
** BTC:  1AumJ5uzz1nuER7pBA6Bh4gNusaxhN85rc
** Your donations will encourage further optimization and development
**
** press CTRL+C to exit
*****************************************************************************
Vendor of used platform (#1 / 1): Advanced Micro Devices, Inc.
        Name of device #1 / 3 (deviceID 0): Cypress
        Name of device #2 / 3 (deviceID 1): Cypress
        Name of device #3 / 3 (deviceID 2): Hawaii


spawning 1 worker thread(s)
[WORKER0] Hello, World!
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
[MASTER] 2014-Feb-11 01:37:17 | work received | sharetarget: 00ffffffffffffffffffffffffffffffffffffffffffffffffffffffbeefde


Messages during compilation of program for device 'Cypress':

LOOP UNROLL: pragma unroll (line 162)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 112)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 179)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 169)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 222)
    Unrolled as requested!

[STATS] 2014-Feb-11 01:37:26 | 888.00 c/m | 0.00 sh/m | VL: 0 (0.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER0] share found: 31769787 <-> 22056509 #1 (292) @ 1392079122
[STATS] 2014-Feb-11 01:37:36 | 888.00 c/m | 3.00 sh/m | VL: 1 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER0] share found: 14050831 <-> 38656591 #2 (350) @ 1392079137
[STATS] 2014-Feb-11 01:37:46 | 880.00 c/m | 4.00 sh/m | VL: 2 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[STATS] 2014-Feb-11 01:37:56 | 891.00 c/m | 3.00 sh/m | VL: 2 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[STATS] 2014-Feb-11 01:38:06 | 873.60 c/m | 2.40 sh/m | VL: 2 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)

and this if the other one:
Code Select
C:\clpts-v0.1.4_win_x86-64>clpts_x86-64.exe PcGVSa1S5K7bYjL9BaBaEYzRdFHTwRW6PW -t 1 -a 0
*****************************************************************************
** clpts - OpenCL PTS Pool Miner v0.1.4
** by NaN - based on ptsminer.
** If you like this software, please consider sending tips to: [email protected]
** PTS:  PtLx9kDLTXtR1ae3u7naXLPeGjjHZ1PGoR
** BTC:  1AumJ5uzz1nuER7pBA6Bh4gNusaxhN85rc
** Your donations will encourage further optimization and development
**
** press CTRL+C to exit
*****************************************************************************
Vendor of used platform (#1 / 1): Advanced Micro Devices, Inc.
        Name of device #1 / 3 (deviceID 0): Cypress
        Name of device #2 / 3 (deviceID 1): Cypress
        Name of device #3 / 3 (deviceID 2): Hawaii


spawning 1 worker thread(s)
[WORKER0] Hello, World!
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
[MASTER] 2014-Feb-11 01:38:58 | work received | sharetarget: 00ffffffffffffffffffffffffffffffffffffffffffffffffffffffbeefde4d


Messages during compilation of program for device 'Cypress':

LOOP UNROLL: pragma unroll (line 162)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 112)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 179)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 169)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 222)
    Unrolled as requested!

[STATS] 2014-Feb-11 01:39:08 | 588.00 c/m | 0.00 sh/m | VL: 0 (0.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER0] share found: 45539184 <-> 65899685 #1 (130) @ 1392079192
[WORKER0] share found: 37439257 <-> 18122184 #2 (228) @ 1392079227
[STATS] 2014-Feb-11 01:39:18 | 684.00 c/m | 6.00 sh/m | VL: 1 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[MASTER] 2014-Feb-11 01:39:20 | work received | sharetarget: 00ffffffffffffffffffffffffffffffffffffffffffffffffffffffbeefde4d
[STATS] 2014-Feb-11 01:39:28 | 736.00 c/m | 4.00 sh/m | VL: 2 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER0] share found: 37708494 <-> 27113780 #3 (384) @ 1392079202
[WORKER0] share found: 67088250 <-> 45650505 #4 (488) @ 1392079242
[STATS] 2014-Feb-11 01:39:38 | 741.00 c/m | 6.00 sh/m | VL: 4 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER0] share found: 31747746 <-> 4911902 #5 (672) @ 1392079289
[STATS] 2014-Feb-11 01:39:48 | 811.20 c/m | 6.00 sh/m | VL: 5 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER0] share found: 32841255 <-> 51560351 #6 (698) @ 1392079295
[WORKER0] share found: 53682091 <-> 49001925 #7 (728) @ 1392079308
[WORKER0] share found: 44389161 <-> 25052278 #8 (778) @ 1392079322
[INFO] 2014-Feb-11 01:39:58 | mining 35s for developer
[STATS] 2014-Feb-11 01:39:58 | 838.00 c/m | 8.00 sh/m | VL: 8 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[STATS] 2014-Feb-11 01:40:08 | 838.29 c/m | 6.86 sh/m | VL: 8 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)

aaand everything together:
Code Select
C:\clpts-v0.1.4_win_x86-64>clpts_x86-64.exe PcGVSa1S5K7bYjL9BaBaEYzRdFHTwRW6PW -t 0,1,2 -a 0
*****************************************************************************
** clpts - OpenCL PTS Pool Miner v0.1.4
** by NaN - based on ptsminer.
** If you like this software, please consider sending tips to: [email protected]
** PTS:  PtLx9kDLTXtR1ae3u7naXLPeGjjHZ1PGoR
** BTC:  1AumJ5uzz1nuER7pBA6Bh4gNusaxhN85rc
** Your donations will encourage further optimization and development
**
** press CTRL+C to exit
*****************************************************************************
Vendor of used platform (#1 / 1): Advanced Micro Devices, Inc.
        Name of device #1 / 3 (deviceID 0): Cypress
        Name of device #2 / 3 (deviceID 1): Cypress
        Name of device #3 / 3 (deviceID 2): Hawaii


spawning 3 worker thread(s)
[WORKER0] Hello, World!
[WORKER2] Hello, World!
[WORKER1] Hello, World!
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
[MASTER] 2014-Feb-11 01:40:48 | work received | sharetarget: 00ffffffffffffffffffffffffffffffffffffffffffffffffffffffbeefde4d


Messages during compilation of program for device 'Hawaii':

LOOP UNROLL: pragma unroll (line 162)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 112)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 179)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 169)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 222)
    Unrolled as requested!

WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!


Messages during compilation of program for device 'Cypress':

LOOP UNROLL: pragma unroll (line 162)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 112)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 179)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 169)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 222)
    Unrolled as requested!

WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!


Messages during compilation of program for device 'Cypress':

LOOP UNROLL: pragma unroll (line 162)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 112)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 179)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 169)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 222)
    Unrolled as requested!

[WORKER2] share found: 1668375 <-> 8285825 #1 (314) @ 1392079370
[STATS] 2014-Feb-11 01:40:58 | 1944.00 c/m | 6.00 sh/m | VL: 1 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER1] share found: 8344346 <-> 38694816 #2 (328) @ 1392079330
[WORKER0] share found: 13636221 <-> 3287609 #3 (390) @ 1392079359
[WORKER2] share found: 46169116 <-> 59165253 #4 (396) @ 1392079391
[WORKER2] share found: 15325802 <-> 10509091 #5 (472) @ 1392079412
[STATS] 2014-Feb-11 01:41:08 | 2292.00 c/m | 15.00 sh/m | VL: 5 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER1] share found: 47653015 <-> 26438904 #6 (856) @ 1392079471
[WORKER1] share found: 18482529 <-> 59748789 #7 (870) @ 1392079474
[STATS] 2014-Feb-11 01:41:18 | 2460.00 c/m | 14.00 sh/m | VL: 7 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER1] share found: 30990259 <-> 14285902 #8 (1372) @ 1392079612
[WORKER2] share found: 18936802 <-> 35523611 #9 (1394) @ 1392079688
[WORKER2] share found: 43732581 <-> 30094639 #10 (1556) @ 1392079739
[STATS] 2014-Feb-11 01:41:28 | 2469.00 c/m | 15.00 sh/m | VL: 10 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER0] share found: 46194975 <-> 37060684 #11 (1662) @ 1392079713
[WORKER1] share found: 3000725 <-> 46534740 #12 (1814) @ 1392079732
[STATS] 2014-Feb-11 01:41:38 | 2529.60 c/m | 14.40 sh/m | VL: 12 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER1] share found: 43963157 <-> 39575243 #13 (2340) @ 1392079873
[WORKER1] share found: 39575243 <-> 43963157 #14 (2340) @ 1392079873
[WORKER0] share found: 42249946 <-> 12144704 #15 (2468) @ 1392079923
[WORKER1] share found: 15250890 <-> 29643259 #16 (2518) @ 1392079918
[INFO] 2014-Feb-11 01:41:48 | mining 35s for developer
[STATS] 2014-Feb-11 01:41:48 | 2590.00 c/m | 16.00 sh/m | VL: 16 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER1] share found: 21633480 <-> 54256048 #17 (2882) @ 1392080020
[MASTER] 2014-Feb-11 01:41:55 | work received | sharetarget: 00ffffffffffffffffffffffffffffffffffffffffffffffffffffffbeefde4d
[STATS] 2014-Feb-11 01:41:58 | 2629.71 c/m | 14.57 sh/m | VL: 17 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER1] share found: 64748704 <-> 47392596 #18 (3112) @ 1392079357
[WORKER1] share found: 55495297 <-> 28938951 #19 (3440) @ 1392079459
[STATS] 2014-Feb-11 01:42:08 | 2604.00 c/m | 14.25 sh/m | VL: 19 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER2] share found: 65895148 <-> 1773391 #20 (3528) @ 1392079496
[WORKER0] share found: 58584626 <-> 457199 #21 (3668) @ 1392079524

Am I doing something wrong?
Please help me :(

NaN

#242
February 11, 2014, 12:38:27 AM
I guess that you use a Catalyst driver that is too old. Please update the driver.

balthazr

#241
February 10, 2014, 10:36:03 PM
Quote
Error during compilation of program for device 'Tahiti':

Internal error: Input OpenCL binary is not for the target!

any suggestions guys?

nanaya

#240
February 10, 2014, 08:05:07 PM Last Edit: February 10, 2014, 08:20:59 PM by nanaya
Thank for your miner

win7 x64
ASUS 280X 1125/1500 use two threads and -a 1 , 3280CPM
ASUS R9 290nonX(reference) 1025/1250 use two threads -a 0 only 2900CPM , why?
Print
Go Up Pages 1 ... 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 ... 62
User actions