AMD OpenCL Momentum miner

[Alec246]

What are you undervolting the card to with success? I seem to have the same gigabyte card (1100/1500 factory set overclock) at 3500cpm on two threads but goodness that sure do give a lot of heat... still stays at 60 degrees with the three fans spinning hard... but if I undervolting works well for you I'd like to try the same setting...
[/quote]

1094 with success. I think it can go a step lower still, but I'm testing this way, and it's made some good different in C and Watts. But 60C isn't hot man, here I'm running it at 70C!

[battleaxe]

@battleaxe: A 5770 card won't work with Ubuntu or any other Linux distribution since it will fail to allocate the device memory. You need a card with at least 2GB RAM.

Okay. Thank you for confirming this.

[lir111]

It would be nice to have a 32-bit linux version that we could on BAMT :)

[Darkbane]

My Gigabyte is already factory OCed to 1100/1500. And I'm undervolting it.

Could you tell me how would I set my .bat for one GPU mining? Well, actually I have a 780Ti but I'm not using it for mining, only the R9 280x.

Thank you very much!!

Also, using AMD SDK 2.9 and Catalyst 13.11 on Win8 64

Edit: With -t 0,0 I'm getting only 800 CPM :/

What are you undervolting the card to with success? I seem to have the same gigabyte card (1100/1500 factory set overclock) at 3500cpm on two threads but goodness that sure do give a lot of heat... still stays at 60 degrees with the three fans spinning hard... but if I undervolting works well for you I'd like to try the same setting...

[NaN]

@battleaxe: A 5770 card won't work with Ubuntu or any other Linux distribution since it will fail to allocate the device memory. You need a card with at least 2GB RAM.

[battleaxe]

I think I saw this somewhere on this thread;

I have a 5770 on Ubuntu that I've been trying to test before putting my 290's on it. I cannot get the miner to work on the 5770. This is normal right? I was trying and failing but then remembered I thought I read in here that HD 5 series cards won't work on Ubuntu but will work in windows. I am curious as I did have it working with this miner in Windows.

So just to clarify can the 5770 mine using this miner in Ubuntu?

[rajapatr1]

You Change to 13.2 ?

Yep.

I will test it Nice

[Sozin]

You Change to 13.2 ?

Yep.

[rajapatr1]

Change Driver and try
-px -t 0.0,1,1,3 -a 1

13.12 getting 3500!!! Yesssss

-t 0,0

Changfe your catalyst to it and try!

yessssssssssssssssssss, changed to:

-p x -t 0,0,1,1,3 -a 1

Sitting at ~3400 right now. Thank you both very much.

You Change to 13.12 ?

[Sozin]

Change Driver and try
-px -t 0.0,1,1,3 -a 1

13.12 getting 3500!!! Yesssss

-t 0,0

Changfe your catalyst to it and try!

yessssssssssssssssssss, changed to:

-p x -t 0,0,1,1,3 -a 1

Sitting at ~3400 right now. Thank you both very much.

[Alec246]

13.12 getting 3500!!! Yesssss

-t 0,0

Changfe your catalyst to it and try!

[Alec246]

My Gigabyte is already factory OCed to 1100/1500. And I'm undervolting it.

Could you tell me how would I set my .bat for one GPU mining? Well, actually I have a 780Ti but I'm not using it for mining, only the R9 280x.

Thank you very much!!

Also, using AMD SDK 2.9 and Catalyst 13.11 on Win8 64

Edit: With -t 0,0 I'm getting only 800 CPM :/

[Sozin]

did you run with 2Thread and -a 1 ??

This is what I'm using right now:

-p x -t 0,1,3 -a 1

Change Driver and try
-px -t 0.0,1,1,3 -a 1

Will do. Should also mention this card is not overclocked, mostly because when I do I don't see a CPM change. Just continues to chill at 2647.

[rajapatr1]

did you run with 2Thread and -a 1 ??

This is what I'm using right now:

-p x -t 0,1,3 -a 1

Change Driver and try
-px -t 0.0,1,1,3 -a 1

[Sozin]

did you run with 2Thread and -a 1 ??

This is what I'm using right now:

-p x -t 0,1,3 -a 1