Where do I get to place a bet that the change of name leads to people freaking out and thinking they lost all their coins when they don't think to rename their config directory? (Even the windows installer didn't rename C:\users\blah\AppData\protoshares for me!)
Am I just cynical about the competence of the average investor?
just to clarify.
on 28 february i have my pts wallet [Protoshares-Qt vp0.4.0] with some Pts inside.
To claim Bitshare, on 1 march i install bitshare-Pts wallet [BitShares-PTS v1.0.0].
How to procede to get bitsahre and see coins in bitshare-Pts wallet [BitShares-PTS v1.0.0]?
thankyou very much for the explanation!!!
Please do not confuse, BitShares-PTS and BitShares X.AAhhhhh ... obvious move ... thanks for clarifying this
BitShares-PTS it's a new name of ProtoShares (PTS), so BitShares-PTS Client it's a new version of the ProtoShares Client with few improvements.
just to clarify.
on 28 february i have my pts wallet [Protoshares-Qt vp0.4.0] with some Pts inside.
To claim Bitshare, on 1 march i install bitshare-Pts wallet [BitShares-PTS v1.0.0].
How to procede to get bitsahre and see coins in bitshare-Pts wallet [BitShares-PTS v1.0.0]?
thankyou very much for the explanation!!!
just to clarify.
on 28 february i have my pts wallet [Protoshares-Qt vp0.4.0] with some Pts inside.
To claim Bitshare, on 1 march i install bitshare-Pts wallet [BitShares-PTS v1.0.0].
How to procede to get bitsahre and see coins in bitshare-Pts wallet [BitShares-PTS v1.0.0]?
thankyou very much for the explanation!!!
testz, ty very much for clasification!
so i rephrase with 2 questions :-)
1) on 1 march i install BitShares-PTS. If this new wallet point to %appconfig%/roaming/protoshare [windows here], can i see new PTS on my wallet? Or i need to do something else?
2) when bitshare X will be released, how i can claim my BitShareX for each BitShare-PTS?
thank you again!
Where do I get to place a bet that the change of name leads to people freaking out and thinking they lost all their coins when they don't think to rename their config directory? (Even the windows installer didn't rename C:\users\blah\AppData\protoshares for me!)
Am I just cynical about the competence of the average investor?
Where do I get to place a bet that the change of name leads to people freaking out and thinking they lost all their coins when they don't think to rename their config directory? (Even the windows installer didn't rename C:\users\blah\AppData\protoshares for me!)
Am I just cynical about the competence of the average investor?
Not everyone is a genius like you.
I wouldn't mind step by step instructions for Mac users on how to transfer my current PTS wallet to the new version.
Where do I get to place a bet that the change of name leads to people freaking out and thinking they lost all their coins when they don't think to rename their config directory? (Even the windows installer didn't rename C:\users\blah\AppData\protoshares for me!)
Am I just cynical about the competence of the average investor?
Not everyone is a genius like you.
I wouldn't mind step by step instructions for Mac users on how to transfer my current PTS wallet to the new version.
where is the data in new version for Mac?
Why no builds for Linux users?
How about setting up a ppa repository to host .deb packages for Ubuntu users?
Answer for 1st question see above.
After 1 of March when BitShares X will be released you will import BitShares-PTS (ProtoShares) wallet.dat to BitShares X and will get your BitShares X.
Why no builds for Linux users?
How about setting up a ppa repository to host .deb packages for Ubuntu users?
True Linux users like to compile everything from sources.
Another problem, it's to many Linux and every Linux use self packaging, do we need to make packages for all kind of Linux? http://en.wikipedia.org/wiki/Package_management_system
Bitcoin for Linux has .tgz and .ppa
https://bitcoin.org/en/download
Answer for 1st question see above.
After 1 of March when BitShares X will be released you will import BitShares-PTS (ProtoShares) wallet.dat to BitShares X and will get your BitShares X.
March 1 will not have dl. The ides of march is our target. It has historic significance.
You don't need the pts wallet. We will provide the bts wallet at that time.
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
Answer for 1st question see above.
After 1 of March when BitShares X will be released you will import BitShares-PTS (ProtoShares) wallet.dat to BitShares X and will get your BitShares X.
hi testz!
just last question...
i need to update from PTS to Bitshare-PTS and then to import wallet.dat to the new wallet before 28 february or after?
Or maybe it is the same?
i don't want to loose my pts and i don't want to loose the opportunity to redeem Bitshare-X!!!
ty and have a nice day!!!
getagsbalance
---》no response from server (code -1)
how to resolve it?
Do current users of the older Protoshares QT wallet need to update to this newer wallet before the end of the month to gain access to Bitshares? I tried to update but the new client is unstable for me.
I tried on 2 PCs, Win 8. I would like to get it to work; on one PC it crashed on opening, on restart it refuses to sync. I will get the exact messages it throws up a bit later, just away from that PC till a bit later on.Do current users of the older Protoshares QT wallet need to update to this newer wallet before the end of the month to gain access to Bitshares? I tried to update but the new client is unstable for me.
No, you can keep using ProtoShares QT, BitShares-PTS it's an only new version of ProtoShares client.
Which problems do you have with BitShares-PTS? Crashes, not sync?
March 1 will not have dl. The ides of march is our target. It has historic significance.
You don't need the pts wallet. We will provide the bts wallet at that time.
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
wow nice ;)
But the only date that is critically important is February 28th.
(long before close of business GMT)
Have every PTS in one of your own wallets by then.
Don't leave anything out on an exchange or they will get your BitShares!
(We can't repeat this enough.)
Don't leave anything out on an exchange or they will get your BitShares!
[/size]
(We can't repeat this enough.)[/center]
so, if i decide to update wallet to new version i must do it before 28 February?But the only date that is critically important is February 28th.
(long before close of business GMT)
Have every PTS in one of your own wallets by then.
Why no builds for Linux users?
Don't leave anything out on an exchange or they will get your BitShares!
[/size]
(We can't repeat this enough.)[/center]
so, if i decide to update wallet to new version i must do it before 28 February?But the only date that is critically important is February 28th.
(long before close of business GMT)
Have every PTS in one of your own wallets by then.
I get this issue, it then closes the wallet. Any suggestions?Do current users of the older Protoshares QT wallet need to update to this newer wallet before the end of the month to gain access to Bitshares? I tried to update but the new client is unstable for me.
No, you can keep using ProtoShares QT, BitShares-PTS it's an only new version of ProtoShares client.
Which problems do you have with BitShares-PTS? Crashes, not sync?
Just a quick question, is there any purpose of holding PTS beyond Feb 28th?
I've read people on here saying that there will be a mad rush to sell after feb 28th. I don't know if I should believe that. Surely there must be some other benefits?
Just a quick question, is there any purpose of holding PTS beyond Feb 28th?
I've read people on here saying that there will be a mad rush to sell after feb 28th. I don't know if I should believe that. Surely there must be some other benefits?
All subsequent DACs that use I3 code will honor at least 10% share supply to PTS holders. I3 claims to have more awesome DACs in the pipeline but it looks like BTS X is the main cash cow at the moment.
from everything I've been reading the past month... it seems this would come down to your strategy... do you sell the bitshares pts to get money today, or do you hold on to them for potential future bitshares they create, for which you would get a small share of for each pts you own... the quote from their website is below...
""BitShares PTS comes with a social contract to allocate at least 10% of the total shares in all future BitShare chains to those who hold PTS when the new chain is launched.""
so do you want money now, or later... will it be worth more now, or later... its the big question?
HELP!
I replaced the bitshares-pts app on my mac, and I lost EVERYTHING.
please help. my address changed I lost 15.8 PTS. Help me with this. the address was PrD8Prp82YU3KDysoxfZ1pvbnbmERR6y1w
and it changed to
Pw9RDLAjSHEDvYCuZUg92KaWS5fLUMvcde
what can I do????? I'm panicking right now
EDIT: Okay, so for whatever reason, the protoshare wallet app reappeared after I had replaced it with my bitshare wallet app. Even though I could no longer find the app data folder for protoshare in the hidden folder for my library, from the protoshare app, I was able to make a backup of my wallet and load it into the Bitshare wallet.
Don't scare me like that next time. :D If you want serious investors in the long-term future, you will have to keep the technology idiot friendly.
HELP!
I replaced the bitshares-pts app on my mac, and I lost EVERYTHING.
please help. my address changed I lost 15.8 PTS. Help me with this. the address was PrD8Prp82YU3KDysoxfZ1pvbnbmERR6y1w
and it changed to
Pw9RDLAjSHEDvYCuZUg92KaWS5fLUMvcde
what can I do????? I'm panicking right now
EDIT: Okay, so for whatever reason, the protoshare wallet app reappeared after I had replaced it with my bitshare wallet app. Even though I could no longer find the app data folder for protoshare in the hidden folder for my library, from the protoshare app, I was able to make a backup of my wallet and load it into the Bitshare wallet.
Don't scare me like that next time. :D If you want serious investors in the long-term future, you will have to keep the technology idiot friendly.
I have 500PTS and 300AGS and I'm just petrified to do anything right now. I'm not technically savvy and I'm not changing wallets until someone comes up with step by step instructions for dummies. Will I be ok for the 28th if I just keep using the old PTS wallet?
HELP!
I replaced the bitshares-pts app on my mac, and I lost EVERYTHING.
please help. my address changed I lost 15.8 PTS. Help me with this. the address was PrD8Prp82YU3KDysoxfZ1pvbnbmERR6y1w
and it changed to
Pw9RDLAjSHEDvYCuZUg92KaWS5fLUMvcde
what can I do????? I'm panicking right now
EDIT: Okay, so for whatever reason, the protoshare wallet app reappeared after I had replaced it with my bitshare wallet app. Even though I could no longer find the app data folder for protoshare in the hidden folder for my library, from the protoshare app, I was able to make a backup of my wallet and load it into the Bitshare wallet.
Don't scare me like that next time. :D If you want serious investors in the long-term future, you will have to keep the technology idiot friendly.
I have 500PTS and 300AGS and I'm just petrified to do anything right now. I'm not technically savvy and I'm not changing wallets until someone comes up with step by step instructions for dummies. Will I be ok for the 28th if I just keep using the old PTS wallet?
Quote from: pgbit on Today at 12:51:21 PM
"Do current users of the older Protoshares QT wallet need to update to this newer wallet before the end of the month to gain access to Bitshares? I tried to update but the new client is unstable for me."
Quote from testz
"No, you can keep using ProtoShares QT, BitShares-PTS it's an only new version of ProtoShares client."
did i get it right, that the 28th of february is NOT a test of the bitshare-system with all the pts and ags around it?March 1 will not have dl. The ides of march is our target. It has historic significance.
You don't need the pts wallet. We will provide the bts wallet at that time.
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
wow nice ;)But the only date that is critically important is February 28th.
(long before close of business GMT)
Have every PTS in one of your own wallets by then.
Don't leave anything out on an exchange or they will get your BitShares!
(We can't repeat this enough.)
did i get it right, that the 28th of february is NOT a test of the bitshare-system with all the pts and ags around it?
is it the real launch-date for bitshares?
I get this issue, it then closes the wallet. Any suggestions?Do current users of the older Protoshares QT wallet need to update to this newer wallet before the end of the month to gain access to Bitshares? I tried to update but the new client is unstable for me.
No, you can keep using ProtoShares QT, BitShares-PTS it's an only new version of ProtoShares client.
Which problems do you have with BitShares-PTS? Crashes, not sync?
(http://i.imgur.com/Pd3OtA6.png)
o.k. snapshot-date = 2014-02-28did i get it right, that the 28th of february is NOT a test of the bitshare-system with all the pts and ags around it?
is it the real launch-date for bitshares?
Not launch date, but snapshot date. You won't get the BitSharesX software then, but you need to have all your AGS donations in and all your PTS in a wallet you control by then in order to get BTS from them when the launch occurs.
o.k. snapshot-date = 2014-02-28
for PTS and AGS?
what about the PTS mined after the 28th of february?
that PTS will only count for the next DAC - with a new snapshot-date?
is the AGS-generation closed at this date - though the donations to get AGS?
I get this issue, it then closes the wallet. Any suggestions?Do current users of the older Protoshares QT wallet need to update to this newer wallet before the end of the month to gain access to Bitshares? I tried to update but the new client is unstable for me.
No, you can keep using ProtoShares QT, BitShares-PTS it's an only new version of ProtoShares client.
Which problems do you have with BitShares-PTS? Crashes, not sync?
(http://i.imgur.com/Pd3OtA6.png)
I will check it and reply you here.
OK, I deleted the folders in the >Roaming>Bitshares-PTS folders (i.e. those named database, chainstate, blocks), and then it loads just fine. Thanks, seems just fine now, fully synced.I get this issue, it then closes the wallet. Any suggestions?Do current users of the older Protoshares QT wallet need to update to this newer wallet before the end of the month to gain access to Bitshares? I tried to update but the new client is unstable for me.
No, you can keep using ProtoShares QT, BitShares-PTS it's an only new version of ProtoShares client.
Which problems do you have with BitShares-PTS? Crashes, not sync?
(http://i.imgur.com/Pd3OtA6.png)
I will check it and reply you here.
I test BitShares-PTS in Windows 8 x64, its works without any problems.
Looks like you familiar with wallet files and to save time, move/copy ProtoShares files to BitShares-PTS folder. Please try to delete these files and sync wallet from scratch. After this everything should work fine.
Please don't forget to backup wallet.dat file before any changes!!!
Let's us know about results.
OK, I deleted the folders in the >Roaming>Bitshares-PTS folders (i.e. those named database, chainstate, blocks), and then it loads just fine. Thanks, seems just fine now, fully synced.
I test BitShares-PTS in Windows 8 x64, its works without any problems.
Looks like you familiar with wallet files and to save time, move/copy ProtoShares files to BitShares-PTS folder. Please try to delete these files and sync wallet from scratch. After this everything should work fine.
Please don't forget to backup wallet.dat file before any changes!!!
Let's us know about results.
well, I am afraid I may have lost my PTS. I elected to send them from the old client to the address of my new one. Seeing as how there's "0 active connections to the network" on my old client and displays the outbound transfer with an account balance of zero, it feels like my PTS may have vanished into "space"
any insights?
well, I am afraid I may have lost my PTS. I elected to send them from the old client to the address of my new one. Seeing as how there's "0 active connections to the network" on my old client and displays the outbound transfer with an account balance of zero, it feels like my PTS may have vanished into "space"
any insights?
try this:
https://bitsharestalk.org/index.php?topic=3012.0
Thanks for the direction!
I decided to run both wallets simultaneously on two separate computers. PTS have been sent and received. Next time I'll just copy paste the wallet dat and make sure to backup before the upgrade
I installed the Windows version with Wine.
When I go here: /.wine/drive_c/Program Files/BitShares-PTS, I can see:
bitshares-ptsd.exe BitShares-PTS.exe and uninstall.exe
My question is, where do I have to copy the wallet file?
Edit: In case I want to build it, could someone post the lines for the terminal please?
(I already build the PTSMiner so I guess I have all dependencies)
Thanks for your support!
I wrote a quick set of instructions for OS X users to help them migrate from the old Protoshares client to the new Bitshares-PTS wallet. Hope this helps people.
http://www.musiccitybitcoins.com/post/77292289051/protoshares-wallet-upgrade (http://www.musiccitybitcoins.com/post/77292289051/protoshares-wallet-upgrade)
updated to bitshare-PTS walet!
all goes well...
;)
OK, I deleted the folders in the >Roaming>Bitshares-PTS folders (i.e. those named database, chainstate, blocks), and then it loads just fine. Thanks, seems just fine now, fully synced.I get this issue, it then closes the wallet. Any suggestions?Do current users of the older Protoshares QT wallet need to update to this newer wallet before the end of the month to gain access to Bitshares? I tried to update but the new client is unstable for me.
No, you can keep using ProtoShares QT, BitShares-PTS it's an only new version of ProtoShares client.
Which problems do you have with BitShares-PTS? Crashes, not sync?
(http://i.imgur.com/Pd3OtA6.png)
I will check it and reply you here.
I test BitShares-PTS in Windows 8 x64, its works without any problems.
Looks like you familiar with wallet files and to save time, move/copy ProtoShares files to BitShares-PTS folder. Please try to delete these files and sync wallet from scratch. After this everything should work fine.
Please don't forget to backup wallet.dat file before any changes!!!
Let's us know about results.
cannot download (from china)
I met a problem when using new BitShares-PTS 1.0 wallet. I install the new wallet and copy wallet.dat to new folder then run it. The new wallet run and sync all block normally. But when I open wallet second time it said 'error loading block database. Do you want to rebuild the block database now'. I click ok and then it appeared 'assertion failed file:db/version_set.cc line:751 expression:dummy_version_.next_==&dummy_versions_'. I try to reinstall wallet but still the same.
My system is win7 32bit, previous wallet is V0.8.5 and it works fine.
Hi testz,
My bitshare-pts wallet corrupter several time on mac...i had to remove the wallet from mac and reinstall ..Sync several time..is that mac version unstable?
it starting prompt that did not shut down properly and asking to reopen but its never success to open it..
now i am sync the wallet but it prompt for System error:CDB(): can't open database file wallet.dat, error-30974,
can you advise how to handle..i restart several time but it is still same get when it is sync
thanks. It works. But it seems i have to change the directory's name to BitShares-PTS.cannot download (from china)
You can download BitShares-PTS v1.0.0 from:
https://www.dropbox.com/sh/sv91k3j7phsgl1h/PnWFcij9N3
MD5 sums:
9a47c1e342001d78633b50e906479f11 *BitShares-PTS-1.0.0-macosx.dmg
7773512f63cbe76101ca40dba7df9acd *BitShares-PTS-1.0.0-win32-setup.exe
thanks. It works. But it seems i have to change the directory's name to BitShares-PTS.
Thanks for your support!
Enjoy our community and help others if you can :)
Is this the wallet I send my protoshares from the exchange to have them claimed for new bitshares allocation on the 28th?This one will work, or if you have the older Protoshares branded one, you're still safe. If you do have the older one, you may want to install this latest release and copy over your wallet.dat file.
OK, so I jumped and installed the new wallet early.
I have 1.24PTS in my wallet as of this morning, as I just started mining a few days ago with a couple of 7870's and a couple of 560ti's. (Surprisingly, not as far apart in performance as you would think.)
My ORIGINAL PLAN was to swap this over into the market asap, but then I read up again on this ordeal... I guess I am supposed to receive an equal amount in BTS on the 28th or something? I've tried combing through the posts... maybe someone can elaborate a little better for me if it's not too much trouble.
I can't open it in Mac OS X.
This is problem detials https://gist.github.com/anonymous/9180536 (https://gist.github.com/anonymous/9180536)
I can't open it in Mac OS X.
This is problem detials https://gist.github.com/anonymous/9180536 (https://gist.github.com/anonymous/9180536)
Please post debug.log file from user/Library/Application Support/BitShares-PTS
I can't open it in Mac OS X.
This is problem detials https://gist.github.com/anonymous/9180536 (https://gist.github.com/anonymous/9180536)
Please post debug.log file from user/Library/Application Support/BitShares-PTS
~/Library/Application\ Support/BitShares-PTS has not been created, so not found debug.log file.
I can't open it in Mac OS X.
This is problem detials https://gist.github.com/anonymous/9180536 (https://gist.github.com/anonymous/9180536)
Please post debug.log file from user/Library/Application Support/BitShares-PTS
~/Library/Application\ Support/BitShares-PTS has not been created, so not found debug.log file.
Did you see anything in the general log along the lines of "This application failed to start because it could not find or load the Qt platform plugin “cocoa”."?
That stack trace can apparently be seen if QT can't find it's Mac plugins.
I'm not a developer for this project, so I can't help much, but I don't think you need to have installed QT - it could be a problem with how QT was packaged with the app.
I do know that if qt can't find all the dynamic libraries it needs then it can abort in that same way.
Possible to have a Linux version ?
Possible to have a Linux version ?
Try this one, created by one of forum user: http://software.opensuse.org/download.html?project=home%3Ap_conrad%3Acoins&package=bitshares-pts
ok, so I donwloaded the PTS wallet from http://protoshares.net/ about two weeks ago. Today I just downloaded the new wallet from the OP. how to I receive the Bitshares? I dont see them in my wallets. i've tried reading through a few posts but im still at lost on whats going on exactly. please help!
There was a snapshot on the 28th. Keep that wallet, when bts arrives you will use it to claim bts.
This client is current and works great for sending and receiving Bitshares PTS (formerly known as Protoshares). It's the Bitshares XT client we're waiting for at this point.There was a snapshot on the 28th. Keep that wallet, when bts arrives you will use it to claim bts.
so, this client is useless until bitshares-PTS is released I gather and we should not/cannot transfer PTS to this client?
This client is current and works great for sending and receiving Bitshares PTS (formerly known as Protoshares). It's the Bitshares XT client we're waiting for at this point.
I have downloaded the new BTS wallet. I run the application and I had the message to rebuild the block chain etc that was posted earlier by another user...
I have deleted everything on the BTS folder and re run the application and it was synchronizing...
Before it fully synchronised I have sent som PTS from cryptsy.
Once fully synchronised my transaction still didn't appear, so I thought to restart the application, but I get again the same message about rebuild the block chain etc...
Can you please advise what I have to do?Please explain with simple dirrections as I am newbie to all these and I don't understand things very well. I read somewhere I think that I have to rename my conf file but I don't knowwhat the conf file is...
Thanks for your help...
thank you for the reply but my problem is that the BTS application don't run again and I get the message that another user posted earlier on about
assertion failed
....
File:db/version_set.cc
expression dummy versions_.next==dummy versions
....
(PJIT must be enabled) ...
Previously I have deleted evereything in the BTS folder and synchronized but now I don't want to delete anything again...I think there is another solution which I don't understand,...Even if I save my wallet. dat file and I delete everything and I re upload the wallet.dat again, i think I will experience the same issue.
I think I have to renmae something...
Please help..
I have downloaded the new BTS wallet. I run the application and I had the message to rebuild the block chain etc that was posted earlier by another user...
I have deleted everything on the BTS folder and re run the application and it was synchronizing...
Before it fully synchronised I have sent som PTS from cryptsy.
Once fully synchronised my transaction still didn't appear, so I thought to restart the application, but I get again the same message about rebuild the block chain etc...
Can you please advise what I have to do?Please explain with simple dirrections as I am newbie to all these and I don't understand things very well. I read somewhere I think that I have to rename my conf file but I don't knowwhat the conf file is...
Thanks for your help...
Simple wait until client rebuild the block chain and wait for you transaction from cryptsy.
Because current PTS rate, miners lost interest for mining PTS and network slow down, you transaction will arive in few hours.
You can watch for current blocks and transactions in one of the block explorer, like:
http://ptsexplorer.renegade.im/chain/BitShares-PTS
Is Wine still the best option for Linux? Or a Windows WM?
Is Wine still the best option for Linux? Or a Windows WM?
For Linux you can compile by your self, or download .deb package from our Nightly Build Server:
https://bitsharestalk.org/index.php?topic=2952.45
Is Wine still the best option for Linux? Or a Windows WM?
For Linux you can compile by your self, or download .deb package from our Nightly Build Server:
https://bitsharestalk.org/index.php?topic=2952.45
Does the .deb package work for Xubuntu/Ubuntu too?
sudo dpkg -i package.deb
Is Wine still the best option for Linux? Or a Windows WM?
For Linux you can compile by your self, or download .deb package from our Nightly Build Server:
https://bitsharestalk.org/index.php?topic=2952.45
Does the .deb package work for Xubuntu/Ubuntu too?
Yes, install using dpkg command from terminal:Code: [Select]sudo dpkg -i package.deb
http://www.cyberciti.biz/faq/ubuntu-linux-how-do-i-install-deb-packages/
Any updates regarding new release of openSSL 1.0.1g ?
Any updates regarding new release of openSSL 1.0.1g ?
Yes, at next release Open SSL will be updated, but it's not critical because Open SSL hole not really affected wallet software:
http://www.cryptocoinsnews.com/news/openssl-heartbleed-security-bug/2014/04/08
Any updates regarding new release of openSSL 1.0.1g ?
Yes, at next release Open SSL will be updated, but it's not critical because Open SSL hole not really affected wallet software:
http://www.cryptocoinsnews.com/news/openssl-heartbleed-security-bug/2014/04/08
Any updates regarding new release of openSSL 1.0.1g ?
Yes, at next release Open SSL will be updated, but it's not critical because Open SSL hole not really affected wallet software:
http://www.cryptocoinsnews.com/news/openssl-heartbleed-security-bug/2014/04/08
Where there does it say that wallets (like mulitbit etc) are not effected?
Any updates regarding new release of openSSL 1.0.1g ?
Yes, at next release Open SSL will be updated, but it's not critical because Open SSL hole not really affected wallet software:
http://www.cryptocoinsnews.com/news/openssl-heartbleed-security-bug/2014/04/08
So only mining to wallets could be affected... anything else (like transfering PTS) is not being affected by this bug?
Is Wine still the best option for Linux? Or a Windows WM?
For Linux you can compile by your self, or download .deb package from our Nightly Build Server:
https://bitsharestalk.org/index.php?topic=2952.45
Linux Download:
ftp://178.63.85.22/Bitshares-PTS/Linux/
Is Wine still the best option for Linux? Or a Windows WM?
For Linux you can compile by your self, or download .deb package from our Nightly Build Server:
https://bitsharestalk.org/index.php?topic=2952.45
Linux Download:
ftp://178.63.85.22/Bitshares-PTS/Linux/
Are those nighly build PTS Client versions reliable and the recommended way (for Ubuntu)?
Also there seems to be a problem with 14.04. See https://bitsharestalk.org/index.php?topic=4312.0 What is the recommended way to install the pts client here?
Is Wine still the best option for Linux? Or a Windows WM?
For Linux you can compile by your self, or download .deb package from our Nightly Build Server:
https://bitsharestalk.org/index.php?topic=2952.45
Linux Download:
ftp://178.63.85.22/Bitshares-PTS/Linux/
Are those nighly build PTS Client versions reliable and the recommended way (for Ubuntu)?
Also there seems to be a problem with 14.04. See https://bitsharestalk.org/index.php?topic=4312.0 What is the recommended way to install the pts client here?
if it's compiled using a different version of libboost, then it needs to be recompiled, or you need to revert back to the earlier version of libboost. i elected to recompile
sudo apt-get install libqtgui4
wget http://178.63.85.22/dl/Bitshares-PTS/Linux/2014-05-16_00-00-43/bitshares-pts-20140516-nightly.deb
sudo dpkg -i bitshares-pts-20140516-nightly.deb
sudo apt-get -f install
Hi, I`ve downloaded this wallet today and I'm restored my backed up wallet.dat . Although I can see my confirmed amount of PTS I cannot send. I've tried to send some of them 4 hours ago but it's still waiting confirmation, it also says there is 8 active connection to the network. Any idea?
Hi, I`ve downloaded this wallet today and I'm restored my backed up wallet.dat . Although I can see my confirmed amount of PTS I cannot send. I've tried to send some of them 4 hours ago but it's still waiting confirmation, it also says there is 8 active connection to the network. Any idea?
2 confirmations for now :( . ypool shows that there is 10786 miners online, is that fake ? Because IMO this amount of miners are supposed to help confirmation jobs ...
[HELP] Open BitShares-PTS.app Failed In Mac OSX 10.9.3! https://bitsharestalk.org/index.php?topic=4794.0 (https://bitsharestalk.org/index.php?topic=4794.0)
System: Mac OSX 10.9.3
Installed BitShares-PTS.app 1.0.0 and failed to open.
Error:
This application failed to start because it could not find or load the Qt platform plugin "cocoa".
How to fix it?
I downloaded the PTS Wallet for Mac just recently. I can't download the blockchain. It says "No block source available" and "0 active connections"
I tried restarting the wallet. still nothing. any help would be greatly appreciated. thanks!
I finally managed to import my old protoshare wallet.dat into the BitsharesX 1.0.0 and after a few minutes the PTS were converted into BTSX 8)
Now my next question is:
How do I mine/hatch or otherwise acquire more BTSX other than buying them?
I have the client open but not sure if I need to initiate some command in order to mine?
This might belong in another thread but I can't seem to find one?
I finally managed to import my old protoshare wallet.dat into the BitsharesX 1.0.0 and after a few minutes the PTS were converted into BTSX 8)
Now my next question is:
How do I mine/hatch or otherwise acquire more BTSX other than buying them?
I have the client open but not sure if I need to initiate some command in order to mine?
This might belong in another thread but I can't seem to find one?
You can't mine BTSX, you can promote yourself as delegate and if you get enough votes you will participate in block creation.
More info about DPOS: http://wiki.bitshares.org/index.php/DPOS
Delegate election thread: https://bitsharestalk.org/index.php?board=61.0
Question, is the 2M cap a hard limit? what happens at 2M?
if the 2M cap is a hard limit, then I assume PoW mining will no longer work after the cap is reached?
Anyone having issues dumping the private key using this client? Please help.
I'm beginning to think bitshares sucks
I'm beginning to think bitshares sucks
I'm beginning to think bitshares sucks
Long confirmation times on PTS are normal due to its archaic difficulty adjustment algorithm. Essentially it's a very poorly-designed bitcoin clone that doesn't incentivize mining very effectively. Don't worry, your transaction will go through. Mine took over an hour yesterday.
I'm beginning to think bitshares sucks
Long confirmation times on PTS are normal due to its archaic difficulty adjustment algorithm. Essentially it's a very poorly-designed bitcoin clone that doesn't incentivize mining very effectively. Don't worry, your transaction will go through. Mine took over an hour yesterday.