BitShares Forum
Other => Graveyard => BitShares PTS => Topic started by: Coinality on November 09, 2013, 11:44:04 pm
-
Just downloaded the ProtoSharesQT but I get a message saying "No block source available" when it loads up. Any ideas?
-
Same issue here.
-
Add these nodes to download the blockchain
addnode=61.238.157.8
addnode=54.254.192.95
addnode=54.207.21.146
addnode=54.206.30.227
addnode=54.219.164.14
addnode=146.185.172.136
addnode=162.243.14.13
-
If you have problems with ProtoShares network discovery add node cryptoseed.cloudapp.net to params of the wallet, example:
protoshares-qt.exe -addnode=cryptoseed.cloudapp.netor to protoshares.conf, example:
addnode=cryptoseed.cloudapp.net
For everybody behind crazy firewalls use:
protoshares-qt.exe -connect=cryptoseed.cloudapp.net:80
-
I'm not entirely sure how to do that. I tried entering variations of the code into the Console but always came up with "Method not found." Any idea what I'm doing wrong?
-
I'm not entirely sure how to do that. I tried entering variations of the code into the Console but always came up with "Method not found." Any idea what I'm doing wrong?
It's codes not for console, for console try:
addnode cryptoseed.cloudapp.net:80 add
-
Oh! Ya that seemed to have been accepted. I tried restarting the client but got the same "no block source available" message. Should I be editing one of the files inside the protoshares folder instead?
-
Oh! Ya that seemed to have been accepted. I tried restarting the client but got the same "no block source available" message. Should I be editing one of the files inside the protoshares folder instead?
Run ProtoClient as protoshares-qt.exe -connect=cryptoseed.cloudapp.net:80
You can do it by creating a .bat file or change the shortcut if you run it using shortcut.
-
I'm in business! Thank you!
-
Just to clarify: do I need to setgenerate true to receive pts?
-
Instead setgenerate true, run mining from menu
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
-
I just dl'd Protoshares-QT for Mac. I'm a little lost. I get this same error "No block source available" but I don't follow where/how I can add these nodes. Any help?
Cheers,
db
-
Sorry, never mind. I missed the "Help>Debug Window>Console" part. I'm good. :)
-
Downloaded this and running it under wine in Ubuntu, added the nodes as far as I can tell but its not syncing up. Its saying I have one active connection to the Protoshares network. Seems to be falling further behind. Any ideas?
-
Downloaded this and running it under wine in Ubuntu, added the nodes as far as I can tell but its not syncing up. Its saying I have one active connection to the Protoshares network. Seems to be falling further behind. Any ideas?
Do you update protosharesd to 0.2.0? http://bitsharestalk.org/index.php?topic=370.0
Try nodes from: http://bitsharestalk.org/index.php?topic=172.0
-
I have the new wallet but still no block source available
I want to start mining!
-
Got the same issue here. Tried adding the nodes. No go.
EDIT!:
http://bitsharestalk.org/index.php?topic=172.0
Add the nodes from there in the debug window.
-
Still no block by my side :(
-
Type in console: addnode 94.23.215.174 add
It should help.
-
I got it to work and hadn't changed anything, but am now getting the "No block source available" message again. I've tried adding the recommended nodes but no luck.
-
I got it to work and hadn't changed anything, but am now getting the "No block source available" message again. I've tried adding the recommended nodes but no luck.
I'm also still having this issue - any updates or new nodes to try?
-
162.243.45.158
192.241.139.62
-
Thanks bytemaster, but still nothing for me. :-\
I even waited about 10 minutes, restarted wallet and re-entered nodes.
How can I determine if its an issue connecting to a node or something else?
-
I was also able to get mining up and running yesterday around 2:30am - if I can't connect to ProtoShares network with my wallet, will my earnings continue to accrue and payout when I finally do connect?
-
How can I launch the protoshares-qt client (on Windows 7) from the command line, and/or from the conf. file, instructing it to generate coins and mine? I run a mining manager that periodically restarts miners and/or reboots the computer; it would be nice to have the client mine automatically at launch.
AND/OR is there a separate command-line miner somewhere which I don't know about, and could use (yes, I could look around--sorry; have looked some but not extensively)?
Also, where/how should I expect any user interface feedback on any results from mining (e.g. will it hopefully eventually "mine" a "coin?")
-
Any word if they are going to update current nodes to accept more connections?
-
Adding IPs available on this forum still no block source available problem.
Edit: It found one active connection and its now syncing.
-
Running the windows 32 bit, I get the same thing, but mine, (after syncing up, less than 1 hour ago) now...starts with 1 connection and then goes to zero, and then back to one, etc.
I added all of the "addnodes" to my .conf file.
If I go to the debug window and try to add them, one at a time, it tells me they are already added, so I know they are all there.
running the 64 bit version (from the command lline prompt), I get:
[ worker0] Hello World!
[Worker0] GoGoGo!
connecting to 54.201.26.128:1337
[Master] work received - sharetarget: (long hex number here)
after a while....
[Worker] collision found: (number) <-> (another number) #34 @ (3rd number) by 0
[Master] submitted share -> SHARE
then it stops, tells me it has an error, and I have to start over
I have tried the amd and intel versions with no luck, except the above.
Intel 64 bit is on an intel quad processor and 8gb memory
AMD 64 bit is dual core, with 8gb, both 1600 memory.
I see no options to add nodes here, in a batch file, but shouldn't it be using the same .conf file?
thanks
says I have version 0.8.5.0
-
Remember to use this format on the debug console
addnode 162.243.14.13 add
-
any new nodes? i cannot connect for almost a day now
-
any new nodes? i cannot connect for almost a day now
5.9.24.81
-
I had the exact same problem, thanks for this thread. This should be stickied.
-
I had the exact same problem, thanks for this thread. This should be stickied.
+1
-
How do I setup a node?
-
I Opened the wallet and it was Connected to 1 connection all of a sudden it Lost that connection and Now its not syncing??
-
I Opened the wallet and it was Connected to 1 connection all of a sudden it Lost that connection and Now its not syncing??
You can find some help here
https://bitsharestalk.org/index.php?topic=912.0
BTW, stop posting your question everywhere.
-
Just downloaded the ProtoSharesQT but I get a message saying "No block source available" when it loads up. Any ideas?
In you wallet go to Settings>>Options>>Network. Then under Network you declick the "connect through SOCKS-proxy" box - then click "apply". Now close you client and restart it. Double check that SOCKS is unclicked if not repeat the process..
Here are some nodes from my protoshares.conf:
addnode=cryptoseed.cloudapp.net
addnode=180.183.205.118
addnode=162.243.67.4
addnode=162.243.54.126
addnode=37.139.29.236
addnode=64.90.183.137
addnode=180.183.205.118
addnode=61.238.157.8
addnode=54.254.192.95
addnode=54.207.21.146
addnode=54.206.30.227
addnode=54.219.164.14
addnode=146.185.172.136
addnode=162.243.14.13
addnode=94.23.215.174
If you enter them in the wallets command console enter like this:
addnode 94.23.215.174 add
etc
etc
-
Instead node 168.63.12.227 please use cryptoseed.cloudapp.net, it's a DNS name for old 168.63.12.227
-
Instead node 168.63.12.227 please use cryptoseed.cloudapp.net, it's a DNS name for old 168.63.12.227
Updates above post.
But 1 specfic addnode wont really matter much if people from start is trying to connect through SOCKS proxy by default and there is so many millions variables of firewall/router/whatever settings that can prevent the client to connect through SOCKS proxy ;)
-
Just wanted to say: after you add the nodes...wait. Leave the qt running in the background for a couple of hours, even if it still says "No block source available" after adding the nodes. There's a good chance it will be updated next time you look at it.
-
:o
-
current node list http://pastebin.com/eHXk3CC5
-
Just downloaded the ProtoSharesQT but I get a message saying "No block source available" when it loads up. Any ideas?
In you wallet go to Settings>>Options>>Network. Then under Network you declick the "connect through SOCKS-proxy" box - then click "apply". Now close you client and restart it. Double check that SOCKS is unclicked if not repeat the process..
Here are some nodes from my protoshares.conf:
addnode=cryptoseed.cloudapp.net
addnode=180.183.205.118
addnode=162.243.67.4
addnode=162.243.54.126
addnode=37.139.29.236
addnode=64.90.183.137
addnode=180.183.205.118
addnode=61.238.157.8
addnode=54.254.192.95
addnode=54.207.21.146
addnode=54.206.30.227
addnode=54.219.164.14
addnode=146.185.172.136
addnode=162.243.14.13
addnode=94.23.215.174
If you enter them in the wallets command console enter like this:
addnode 94.23.215.174 add
etc
etc
My pts client (Version 0.2.0, available via http://invictus-innovations.com/downloads/) woun't sync and its says "no block source available".
I already sent the PTS from an only exchange to an address provided by the client.
Am I still good to perform what is suggested in the quote above?? OR what am I supposed to do with this http://pastebin.com/eHXk3CC5 ?
Thanks!
-
I know
-
I know
Can anyone help more than that? :) I am a little bit worried
-
I know
Can anyone help more than that? :) I am a little bit worried
jsut open the wallet > help > debug > console
and type addnode <ip> add
-
I entered this into the console:
addnode=cryptoseed.cloudapp.net add
addnode=180.183.205.118 add
addnode=162.243.67.4 add
addnode=162.243.54.126 add
addnode=37.139.29.236 add
addnode=64.90.183.137 add
addnode=180.183.205.118 add
addnode=61.238.157.8 add
addnode=54.254.192.95 add
addnode=54.207.21.146 add
addnode=54.206.30.227 add
addnode=54.219.164.14 add
addnode=146.185.172.136 add
addnode=162.243.14.13 add
addnode=94.23.215.174 add
It said "Method not found (code -32601)"
-
remove the =
addnode cryptoseed.cloudapp.net add
-
Thanks so far.
I tried that as well: I entered:
addnode cryptoseed.cloudapp.net add
addnode 180.183.205.118 add
addnode 162.243.67.4 add
addnode 162.243.54.126 add
addnode 37.139.29.236 add
addnode 64.90.183.137 add
addnode 180.183.205.118 add
addnode 61.238.157.8 add
addnode 54.254.192.95 add
addnode 54.207.21.146 add
addnode 54.206.30.227 add
addnode 54.219.164.14 add
addnode 146.185.172.136 add
addnode 162.243.14.13 add
The reply by the console was:
addnode <node> <add|remove|onetry>
Attempts add or remove <node> from the addnode list or try a connection to <node> once. (code -1)
I entered two of them seperately before. might that have something to do with it?
-
Hey guys,
help -
I can no longer connect to block source for some reason.
Client name = FreeTrade
Version - v0.8.5.0 -unk-beta
OpenSSL 1.0. 1e
Build date Nov 7
Help?
My debug file seems to have a lot of "connection timeout"
-
Hey guys,
help -
I can no longer connect to block source for some reason.
Client name = FreeTrade
Version - v0.8.5.0 -unk-beta
OpenSSL 1.0. 1e
Build date Nov 7
Help?
My debug file seems to have a lot of "connection timeout"
If you want to try our latest client: http://the-iland.net/static/downloads/ProtoShares-0.4.0.zip it has new seed nodes built in.
-
Hey guys,
help -
I can no longer connect to block source for some reason.
Client name = FreeTrade
Version - v0.8.5.0 -unk-beta
OpenSSL 1.0. 1e
Build date Nov 7
Help?
My debug file seems to have a lot of "connection timeout"
If you want to try our latest client: http://the-iland.net/static/downloads/ProtoShares-0.4.0.zip it has new seed nodes built in.
But I already sent more than 300 PTS to an address provided by the 0.2.0 Client!! What do I do? I can not have lost them?! It's money software. It should be safe to use! Especially if its the one provided by the official I3 website...
See my oiriginal post :
Just downloaded the ProtoSharesQT but I get a message saying "No block source available" when it loads up. Any ideas?
In you wallet go to Settings>>Options>>Network. Then under Network you declick the "connect through SOCKS-proxy" box - then click "apply". Now close you client and restart it. Double check that SOCKS is unclicked if not repeat the process..
Here are some nodes from my protoshares.conf:
addnode=cryptoseed.cloudapp.net
addnode=180.183.205.118
addnode=162.243.67.4
addnode=162.243.54.126
addnode=37.139.29.236
addnode=64.90.183.137
addnode=180.183.205.118
addnode=61.238.157.8
addnode=54.254.192.95
addnode=54.207.21.146
addnode=54.206.30.227
addnode=54.219.164.14
addnode=146.185.172.136
addnode=162.243.14.13
addnode=94.23.215.174
If you enter them in the wallets command console enter like this:
addnode 94.23.215.174 add
etc
etc
My pts client (Version 0.2.0, available via http://invictus-innovations.com/downloads/) woun't sync and its says "no block source available".
I already sent the PTS from an only exchange to an address provided by the client.
Am I still good to perform what is suggested in the quote above?? OR what am I supposed to do with this http://pastebin.com/eHXk3CC5 ?
Thanks!
-
......
-
Can someone pleease help. Would make me sleep a lot better tonight!! See my post above. Thanks a lot!
-
If you want to try our latest client: http://the-iland.net/static/downloads/ProtoShares-0.4.0.zip it has new seed nodes built in.
This worked for me after not being able to connect for the longest time.
Thanks Bytemaster!!!
-
Linux mint 16
tried:
addnode cryptoseed.cloudapp.net add
addnode 180.183.205.118 add
addnode 162.243.67.4 add
addnode 162.243.54.126 add
addnode 37.139.29.236 add
addnode 64.90.183.137 add
addnode 180.183.205.118 add
addnode 61.238.157.8 add
addnode 54.254.192.95 add
addnode 54.207.21.146 add
addnode 54.206.30.227 add
addnode 54.219.164.14 add
addnode 146.185.172.136 add
addnode 162.243.14.13 add
SOCKS proxy unticked.
No response after 2 hours and several restarts.
Any ideas what to do now?
-
But can I receive PTS that I already sent to a PTS address that was generated by the 0.2.0 client with the 0.4.0 client ?? Please can someone look at my post (with the quotes) above. Thanks! I tried both, adding the nodes with and without the "=" and always with the SOCKS proxy unticked.
TBH you have quite a bit a problem here which surely doenst help promoting protoshares/bitshares, especially not if someone is loosing his money this way! I got the client from the official download section of invictus-innovations.com !
-
If you want to try our latest client: http://the-iland.net/static/downloads/ProtoShares-0.4.0.zip it has new seed nodes built in.
This worked for me after not being able to connect for the longest time.
Thanks Bytemaster!!!
Thanks Byte,
I tried downloading this and dropping my wallet.dat in the directory. It's still not working. Is there a step I'm missing?
Do I need to "clear out" my old install somehow?
-
The 0.2.0 client is synchronizing now. I downloaded the 0.4.0 client opened it and closed it again because it was not synchronizing. Then I opened the 0.2.0 client and it began to sync... And my pts are in the wallet now too! Thanks if you have done something about it!
I have two questions:
- How can I transfer my coins to a newer client version?
- Can I just copy the whole folder (protoshares-0.2.0) and safe it on for example an usb stick in order to avoid the loss of coins due to hardware failure?
-
I have it working on another computer - how can I import my wallet over to there easily?
-
I'm sorry to say, but this is really messy :(
My PC does not have a protoshares.conf .
I added a few of the new URL's / IP's, but still the wallet is not synchronized.
For this coin to catch on, at least it should easily connect, no??
Where to put protoshares.conf ? In AppData\protoshares? Or in program folder?
What are the contents of a working protoshares.conf? Can anyone please post / update?
If there is NO protoshares.conf - which nodes should I add? Nodes that actually WORK? ;p
Peace!
And good 2014,
devnullius
PS: I asked this question also here: http://scforum.info/index.php/topic,8574.msg22167.html#msg22167
-
I'm sorry to say, but this is really messy :(
My PC does not have a protoshares.conf .
I added a few of the new URL's / IP's, but still the wallet is not synchronized.
For this coin to catch on, at least it should easily connect, no??
Where to put protoshares.conf ? In AppData\protoshares? Or in program folder?
What are the contents of a working protoshares.conf? Can anyone please post / update?
If there is NO protoshares.conf - which nodes should I add? Nodes that actually WORK? ;p
Peace!
And good 2014,
devnullius
If you want to try our latest client: http://the-iland.net/static/downloads/ProtoShares-0.4.0.zip it has new seed nodes built in.
We will be making that the official download in a bit.
-
Thank you! For the fast reply.
I already had seen that download, but according to my protoshares client, I am already at version 0.8 (beta)?
Still, I'll try :)
Peace!
devnullius
POST EDIT: confirmed, syncing protoshares wallet now!
-
i have the mac sq client and

addnode cryptoseed.cloudapp.net add
worked for me form the debug/console under the help menu. thanks for the help guys/gals.
how do i now put this in a mining pool or can i or do i need some other software? thanks again.
bfree
-
free2be: https://bitsharestalk.org/index.php?topic=168.0
There are the topics about pool mining. And yes, to join a pool you need pool mining software you will find right there.
-
Add these nodes to download the blockchain
addnode=61.238.157.8
addnode=54.254.192.95
addnode=54.207.21.146
addnode=54.206.30.227
addnode=54.219.164.14
addnode=146.185.172.136
addnode=162.243.14.13
-
I collected some of the info from this thread on http://wiki.invictus.io/en/ProtoShares_wallet
-
Add these nodes to download the blockchain
addnode=61.238.157.8
addnode=54.254.192.95
addnode=54.207.21.146
addnode=54.206.30.227
addnode=54.219.164.14
addnode=146.185.172.136
addnode=162.243.14.13
Thx Fucking egg. Up and running. Finally. . . .
-
Add these nodes to download the blockchain
addnode=61.238.157.8
addnode=54.254.192.95
addnode=54.207.21.146
addnode=54.206.30.227
addnode=54.219.164.14
addnode=146.185.172.136
addnode=162.243.14.13
Thx Fucking egg. Up and running. Finally. . . .
same here... i have to do this 1x a week...
-
on home connection, i have maxconnections=2, listen=0
connect=5.9.24.81
connect=23.92.25.118
by far the most reliable
-
Hi all,
Can anyone tell me whats happened to my protoshares wallet as it can't connect for 3 days with "no block source available".
I have already add all the node there:
addnode=cryptoseed.cloudapp.net
addnode=180.183.205.118
addnode=162.243.67.4
addnode=162.243.54.126
addnode=37.139.29.236
addnode=64.90.183.137
addnode=180.183.205.118
addnode=61.238.157.8
addnode=54.254.192.95
addnode=54.207.21.146
addnode=54.206.30.227
addnode=54.219.164.14
addnode=146.185.172.136
addnode=162.243.14.13
addnode=94.23.215.174
addnode=5.9.24.81
addnode=23.92.25.118
Can anyone tell me whats going on ? Thanks
-
Hi all,
Can anyone tell me whats happened to my protoshares wallet as it can't connect for 3 days with "no block source available".
I have already add all the node there:
addnode=cryptoseed.cloudapp.net
addnode=180.183.205.118
addnode=162.243.67.4
addnode=162.243.54.126
addnode=37.139.29.236
addnode=64.90.183.137
addnode=180.183.205.118
addnode=61.238.157.8
addnode=54.254.192.95
addnode=54.207.21.146
addnode=54.206.30.227
addnode=54.219.164.14
addnode=146.185.172.136
addnode=162.243.14.13
addnode=94.23.215.174
addnode=5.9.24.81
addnode=23.92.25.118
Can anyone tell me whats going on ? Thanks
outgoing firewall? (ed: or more likely some outdated client)
my own node plus at least 2 of those other ones are functional
-
Hi all,
Can anyone tell me whats happened to my protoshares wallet as it can't connect for 3 days with "no block source available".
I have already add all the node there:
addnode=cryptoseed.cloudapp.net
addnode=180.183.205.118
..
Can anyone tell me whats going on ? Thanks
Try to run ProtoShares client as:
protoshares-qt.exe -connect=cryptoseed.cloudapp.net:80
If it's helps, change:
addnode=cryptoseed.cloudapp.netto:
addnode=cryptoseed.cloudapp.net:80
-
Hi all,
Can anyone tell me whats happened to my protoshares wallet as it can't connect for 3 days with "no block source available".
I have already add all the node there:
addnode=cryptoseed.cloudapp.net
addnode=180.183.205.118
addnode=162.243.67.4
addnode=162.243.54.126
addnode=37.139.29.236
addnode=64.90.183.137
addnode=180.183.205.118
addnode=61.238.157.8
addnode=54.254.192.95
addnode=54.207.21.146
addnode=54.206.30.227
addnode=54.219.164.14
addnode=146.185.172.136
addnode=162.243.14.13
addnode=94.23.215.174
addnode=5.9.24.81
addnode=23.92.25.118
Can anyone tell me whats going on ? Thanks
outgoing firewall? (ed: or more likely some outdated client)
my own node plus at least 2 of those other ones are functional
I am using clinet v0.8.6.0-unk-beta
and its doesn't works either use port 80 (cryptoseed.cloudapp.net:80)
Its was working for a month but suddently "non block source available" for 3 days..... Please kindly help if anyone knows
-
Hi all,
Can anyone tell me whats happened to my protoshares wallet as it can't connect for 3 days with "no block source available".
I have already add all the node there:
addnode=cryptoseed.cloudapp.net
addnode=180.183.205.118
..
Can anyone tell me whats going on ? Thanks
Try to run ProtoShares client as:
protoshares-qt.exe -connect=cryptoseed.cloudapp.net:80
If it's helps, change:
addnode=cryptoseed.cloudapp.netto:
addnode=cryptoseed.cloudapp.net:80
Dear all,
Thanks for help.
It works now with protoshares-qt.exe -connect=cryptoseed.cloudapp.net:80
but can't protoshares.conf for going thru firewall.
I wonder whether the ports changed so that it must go thru port 80?
By the way, anyone knows the link to tell how to backup the wallet and restore on other desktop?? Thanks
-
Hi all,
Can anyone tell me whats happened to my protoshares wallet as it can't connect for 3 days with "no block source available".
I have already add all the node there:
addnode=cryptoseed.cloudapp.net
addnode=180.183.205.118
..
Can anyone tell me whats going on ? Thanks
Try to run ProtoShares client as:
protoshares-qt.exe -connect=cryptoseed.cloudapp.net:80
If it's helps, change:
addnode=cryptoseed.cloudapp.netto:
addnode=cryptoseed.cloudapp.net:80
Dear all,
Thanks for help.
It works now with protoshares-qt.exe -connect=cryptoseed.cloudapp.net:80
but can't protoshares.conf for going thru firewall.
I wonder whether the ports changed so that it must go thru port 80?
By the way, anyone knows the link to tell how to backup the wallet and restore on other desktop?? Thanks
If you always work behind firewall you will not be able to contact other regular nodes, keep runing ProtoShares client as:
protoshares-qt.exe -connect=cryptoseed.cloudapp.net:80
How do I backup my PTS wallet?
https://bitsharestalk.org/index.php?topic=1964.0
-
Note: the only node I can get it to work is
addnode=cryptoseed.cloudapp.net:80
Everything else is "connection refused." And I have no ports blocked in the firewall.
-
on home connection, i have maxconnections=2, listen=0
connect=5.9.24.81
connect=23.92.25.118
by far the most reliable
these worked... had to go through 10 orders with nada...
-
I'm a little discouraged that I'm expected to add some code somewhere to make my wallet function correctly.
You guys are expecting mass adoption with that method?
I'm on a mac and I'm also getting a "No block source available" message.
if there's not a way for me to download an updated wallet that fixes this, I don't see how I'm going to have longterm faith in this project
-
I'm a little discouraged that I'm expected to add some code somewhere to make my wallet function correctly.
You guys are expecting mass adoption with that method?
I'm on a mac and I'm also getting a "No block source available" message.
if there's not a way for me to download an updated wallet that fixes this, I don't see how I'm going to have longterm faith in this project
PTS you need the wallet for is just the intermediary to get you a share in the products that are developed.
For me it solved by following the instructions on this thread and sometimes it just needs a bit of time to find source...
-
Sorry, never mind. I missed the "Help>Debug Window>Console" part. I'm good. :)
I had the same problem. But where do you see this?
I would add the nodes, but where the heck do I do that at? lol
Thanks,
-
Sorry, never mind. I missed the "Help>Debug Window>Console" part. I'm good. :)
I had the same problem. But where do you see this?
I would add the nodes, but where the heck do I do that at? lol
Thanks,
In the .conf file, which would be in /users/xxx/appdata/roaming/Protoshares/protoshares.conf for Windows
here's mine:
server=1
daemon=1
rpcuser=xxxxxxxx
rpcpassword=bleat
rpcallowip=127.0.0.1
rpcport=48392
port=15554
timeout=300
datadir=f:\protoshares
dbcache=1000
gen=0
listen=0
maxconnections=2
#irc=0
upnp=0
dns=0
logtimestamps=1
par=8
connect=5.9.24.81
connect=23.92.25.118
you'd want to change it to maxconnections=10 and change the connects to addnode
I'll always know whether 5.9.24.81 is up or down since it's my machine. 23.92.25.118 used to be reliable, but nowadays I just get connected to my server. I still haven't seen more than 600 connections simultaneously so there's still room for another 400 or so before the client starts crashing (doesn't use epoll)
oh... alternatively, you can click 'help' 'debug window' and then type 'addnode 5.9.24.81 onetry'
-
Im add node following as forum. synchronizing with network but my wallet out of sync. Im newbie.
please remote helpme.
big thanks!
812 883 657
3155
-
5.9.24.81 is down for a bit while I install a new OS
I put a node up at 76.72.171.91
-
I'm not entirely sure how to do that. I tried entering variations of the code into the Console but always came up with "Method not found." Any idea what I'm doing wrong?
It's codes not for console, for console try:
addnode cryptoseed.cloudapp.net:80 add
this worked for me using the console! thnx!
-
Check out the latest release which should fix many problems :)
Changes in this release:
Rebranding to BitShares-PTS
UPNP support
Updated DNS seed
Added checkpoint
Fee reduced back to original
Windows client build with a static libs as one executable without dependencies
TestNet support
getagsbalance command
Windows installer
Mac OSX installer
https://github.com/InvictusInnovations/BitShares-PTS/releases
-
Check out the latest release which should fix many problems :)
Changes in this release:
Rebranding to BitShares-PTS
UPNP support
Updated DNS seed
Added checkpoint
Fee reduced back to original
Windows client build with a static libs as one executable without dependencies
TestNet support
getagsbalance command
Windows installer
Mac OSX installer
https://github.com/InvictusInnovations/BitShares-PTS/releases
my nodes wont relay any free transactions or transactions w/ fees below the earlier client
i noticed it had 700 connections earlier, so if you're just using connect, then you'd probably want to change it to addnode
ed: aha, nm, the new client has what i have set for min trans fee anyway, the .0001. i just never put the free transactions in
-
Hi all,
I'm looking into some PTS I purchased a while back, trying to revive an old PTS wallet I have.
I downloaded and ran bitshares-pts-qt, but I'm seeing "No block source available".
This is how my BitShares-pts.conf looks like:
lang=en
addnode=61.238.157.8
addnode=54.254.192.95
addnode=54.207.21.146
addnode=54.206.30.227
addnode=54.219.164.14
addnode=146.185.172.136
addnode=162.243.14.13
addnode=cryptoseed.cloudapp.net
(The "lang=en" proves the file is being read, because without it I'm seeing it in my localized language).
Any advice on how to get the client to work? Are there any nodes left running BitShares-PTS?
Also - from what I remember the whole premise of PTS was that you could get other "drived" assets/chains from it.
I haven't "redeemed" any of my PTS since I bought them.
What other cryptocurrencies am I entitled to for my PTS, and how do I claim them?
-
Any advice on how to get the client to work? Are there any nodes left running BitShares-PTS?
BitShares PTS has been upgraded to DPOS. See http://pts.cubeconnex.com/index.php?topic=43.0 and http://www.ptscrypto.com.
You can import your old PTS into the new PTS DPOS wallet and continue to use it. If you need any help, feel free to ring a bell at http://ptstalk.org
-
Also - from what I remember the whole premise of PTS was that you could get other "drived" assets/chains from it.
I haven't "redeemed" any of my PTS since I bought them.
What other cryptocurrencies am I entitled to for my PTS, and how do I claim them?
The BitShares-client and the PTS-DPOS client allow importing your old wallet.dat. You'll automatically receive shares for the PTS in your old PTS addresses.
There are other DACs in the works (Play, Music), but they don't have a client yet. The Music sharedrop will be made on the BitShares blockchain, so importing your keys there will automatically give you NOTES when they're ready.
-
Also - from what I remember the whole premise of PTS was that you could get other "drived" assets/chains from it.
I haven't "redeemed" any of my PTS since I bought them.
What other cryptocurrencies am I entitled to for my PTS, and how do I claim them?
The BitShares-client and the PTS-DPOS client allow importing your old wallet.dat. You'll automatically receive shares for the PTS in your old PTS addresses.
There are other DACs in the works (Play, Music), but they don't have a client yet. The Music sharedrop will be made on the BitShares blockchain, so importing your keys there will automatically give you NOTES when they're ready.
How about BitShares BTS? You may be able to get some depending on how old your PTS are!