Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Does it also affect your hashrate?I get only 70% GPU usage on my 280X, what could be the problem?
OK, I have managed to get ~100% usage on all my cards.
If you have 3 cards you have to run 3 instances of miner where every miner uses only one GPU.
(In batch file, after your PTS address add 0-0 or 0-1 or 0-2 respectively to GPU designation)
Hello i'm new to protoshares, i´ve got 2 Gpu´s mining one Hd7870 at 660 Cpm and one Hd 7950 at 949 Cpm are these numbers normal for this cards?Your cpm numbers are good, but your profitability is hard to estimate as of yet. It depends on how much consistently will the pool find blocks, and that depends on total hashing power.
And with this Hash rate how much would i be making per day in protoshares?
Can anyone help with these questions?
Found shares display is only updated when a block is found, and there was no biock found yet. This will be fixed soon (display, that is: we cannot fix finding blockstwo problem:
1.my 280x only run at 500-600cpm. ausu 280x dc2t , what can i do to be normal 1000 cpm like other peoples?
2.pts.1gh.com still don't show any block found. how could i know how much pts i have dig out?
thank you !
I would like to know this also if anyone knows about this.
Afetr about 30 mins I still show 0's for balance, unconfirmed
)
In ubuntu my 560ti was able to run but after a few minutes I get this errorSorry, no idea about this one. Obviously it is out of memory, but it is not clear how is that possible. I will get hold of some Nvidia hardware in the next day or two and will provide a fix or a workaround.
Exception in thread Thread-1:
Traceback (most recent call last):
File "/usr/lib/python2.7/threading.py", line 551, in __bootstrap_inner
flag that can be set to true with the set() method and reset to false
File "/usr/lib/python2.7/threading.py", line 504, in run
given, value defaults to 1.
File "miner.py", line 1491, in miner.miner_thread (miner.c:8220)
File "miner.py", line 1486, in miner.Miner.loop (miner.c:8099)
File "miner.py", line 1474, in miner.Miner.iterate (miner.c:7921)
File "miner.py", line 1268, in miner.PTSHasher.processMidstate (miner.c:4097)
File "/usr/local/lib/python2.7/dist-packages/pyopencl-2013.3-py2.7-linux-x86_64.egg/pyopencl/__init__.py", line 895, in new_func
RuntimeError: clEnqueueReadBuffer failed: out of resources
No, your RAM is more than sufficient. Would you please try starting one miner instance per card?Do you have timeouts or rejects other than 'prevhash-stale' by any chance?i'm getting 1100 CPM on my 7970 ghz edition.
are there any ways to estimate rough profitability for this vs memorycoin?
My 7970 only get 110 CPM, why?..
No, all "accepted"
I have 3 7950 adn 1 7970 running with my pc, total memory is 8G. But the total gpu memory is 12G, maybe my memory is not enough?
Actually someone has reported the same kind of problem with mmc miner in Win7 x64, so chances are this miner is broken in such config on the moment too. I will test this configuration and provide a fix or a workaround in a day or two.AWS is Amazon web services, so, no, GTX 670 is not it.Getting ImportError: MemoryLoadLibrary failed loading pyopencl\cl.pydThe error means OpenCL cannot be loaded in your system. Is this in Windows? btw AWS g2.2xlarge has GRID K520 cards.
Trying to use Nvidia 670. Don't know if it is an AWS Card
Hopefully that picture attached.
Yes Windows 7 64 bit system.
I do have the OpenCL dll in my system 32 folder
On the bold. Does that mean the GTX 670 is not AWS.
Does cgminer start in your system and can find the card?
Yes it does run with other profiles with the GTX670. Never use it since cudaminer hashes better.
If I knew how to attach pictures I could give the wholemessage
Do you have timeouts or rejects other than 'prevhash-stale' by any chance?i'm getting 1100 CPM on my 7970 ghz edition.
are there any ways to estimate rough profitability for this vs memorycoin?
My 7970 only get 110 CPM, why?..
Then it is most likely the case - framebuffer has not left a contiguous 512M piece of VRAM for the miner.Using the ubuntu 64-bit gpu client. My system has 2 nvidia gpus 570 gtx and 560 ti.Looks like the card cannot allocate 512M memory in one piece. Not sure what could cause this. Is your display connected to it?
When trying to run the miner with 570 gtx I get the error below and doesn't run. But it works and runs well with the 560 ti. Anyway to solve this?
Exception in thread Thread-1:
Traceback (most recent call last):
File "/usr/lib/python2.7/threading.py", line 551, in __bootstrap_inner
flag that can be set to true with the set() method and reset to false
File "/usr/lib/python2.7/threading.py", line 504, in run
given, value defaults to 1.
File "miner.py", line 1491, in miner.miner_thread (miner.c:8220)
File "miner.py", line 1486, in miner.Miner.loop (miner.c:8099)
File "miner.py", line 1474, in miner.Miner.iterate (miner.c:7921)
File "miner.py", line 1256, in miner.PTSHasher.processMidstate (miner.c:3810)
MemoryError: clEnqueueNDRangeKernel failed: mem object allocation failure
Yes 570gtx is my primary card driving my monitor.
AWS is Amazon web services, so, no, GTX 670 is not it.Getting ImportError: MemoryLoadLibrary failed loading pyopencl\cl.pydThe error means OpenCL cannot be loaded in your system. Is this in Windows? btw AWS g2.2xlarge has GRID K520 cards.
Trying to use Nvidia 670. Don't know if it is an AWS Card
Hopefully that picture attached.
Yes Windows 7 64 bit system.
I do have the OpenCL dll in my system 32 folder
On the bold. Does that mean the GTX 670 is not AWS.
Getting ImportError: MemoryLoadLibrary failed loading pyopencl\cl.pydThe error means OpenCL cannot be loaded in your system. Is this in Windows? btw AWS g2.2xlarge has GRID K520 cards.
Trying to use Nvidia 670. Don't know if it is an AWS Card
Hopefully that picture attached.
My 5850 seems suspend without anything. Is it correct?Does it stay in this state for long? It may take couple minutes to compile the kernel.
D:\pts-1gh-win\pts-1gh-win>pts-miner.exe Pfx1ZxHaDQYsb3QGWbWGQpydThnD8qSqJc 0-0
Sun Jan 12 02:16:09 2014 Miner Starts - ptspool.1gh.com:8083
PTSHasher:0-0 initialized on platform AMD Accelerated Parallel Processing, devic
e Cypress, vendor: Advan
ced Micro Devices, Inc.
Getting terrible cpm on 290.... ~450This is really strange (if you mean R9 290), 7870 yields 620-630. Any chance you have left your memory downclocked to the floor after mining bitcoin?
I get only 70% GPU usage on my 280X, what could be the problem?A lot of memory access - it is not counted as 'load' since cores are idle when memory is being read/written.
Using the ubuntu 64-bit gpu client. My system has 2 nvidia gpus 570 gtx and 560 ti.Looks like the card cannot allocate 512M memory in one piece. Not sure what could cause this. Is your display connected to it?
When trying to run the miner with 570 gtx I get the error below and doesn't run. But it works and runs well with the 560 ti. Anyway to solve this?
Exception in thread Thread-1:
Traceback (most recent call last):
File "/usr/lib/python2.7/threading.py", line 551, in __bootstrap_inner
flag that can be set to true with the set() method and reset to false
File "/usr/lib/python2.7/threading.py", line 504, in run
given, value defaults to 1.
File "miner.py", line 1491, in miner.miner_thread (miner.c:8220)
File "miner.py", line 1486, in miner.Miner.loop (miner.c:8099)
File "miner.py", line 1474, in miner.Miner.iterate (miner.c:7921)
File "miner.py", line 1256, in miner.PTSHasher.processMidstate (miner.c:3810)
MemoryError: clEnqueueNDRangeKernel failed: mem object allocation failure
As for MVCP90.DLL, would you please try installing this: http://www.microsoft.com/en-us/download/details.aspx?id=29 ?I probably cannot (may not) bundle Nvidia dlls with my software. Rather it should be installation instructions for what is missing..update driver but
Traceback (most recent call last):
File "mmc-miner.py", line 5, in <module>
File "zipextimporter.pyo", line 82, in load_module
File "pyopencl\__init__.pyo", line 28, in <module>
File "zipextimporter.pyo", line 98, in load_module
ImportError: MemoryLoadLibrary failed loading pyopencl\_cl.pyd
Same error here - when we find the right .dlls, I think it would be a good idea to bundle them with the zip to make it as easy as possible to use.
Would you please run dependency walker on the .pyd file itself (it is a pyopencl module DLL). I have put it here: http://mmcdl.1gh.com/_cl.pyd.zip
ok, now there is same problem like in
MSVCP90.DLL
PYTHON27.DLL
GPSVC.DLL
and more
save dwi in http://sdrv.ms/1c38N6Y
