0 Members and 1 Guest are viewing this topic.
Quote from: pulsarz on January 12, 2014, 01:45:44 pmAnyway, anyone with problems please send me a PM, thanksI have sent you an email and one previous PM. I also posted a description of my problem in this thread. You did not respond to any of these messages. I have now sent you another PM.
Anyway, anyone with problems please send me a PM, thanks
Why is my hash rate 30% lower? I have 32 combined hpm and it only indicates 20.2 hpm on the dashboard.
pulsarz,If you're the admin of this pool, I need your help with my account, there, please. I described the situation here --https://bitsharestalk.org/index.php?topic=1658.msg20282#msg20282-- but I'll just copy that message here (heavily abridged):I joined your pool, but neglected to write down the PIN for my account (without which I can't set a withdrawal address or donation percent It seems your pool doesn't yet have an account or PIN recovery mechanism. It also locked me out after my three incorrect PIN guesses. I can't access my account at all, but I mined at it for a few days. My forum profile here allows you to email me. Please reactivate my pool account (it has the same display/username I have here), and hard reset (manually code) my PIN, and email me the new PIN, so that I can log in and change my account settings.Thanks!
Nothing but rejects so far, I'll mine til I wake back up and see if/what anything changes.Nicely done with the MPOS pool.
[16:47:03] HTTP request failed: Recv failure: Connection reset by peer[16:47:03] json_rpc_call failed, retry after 1 seconds
Added debug, now I get error 403 access forbidden.I don't understand what is wrong.
HiJust registered on this pool.I'm trying to connect to the pool but no responses at all.Checked everything; worker name and pass are ok but no signs.
Bonus is paid out of my own pocket.
Quote from: pulsarz on December 29, 2013, 04:20:11 amTo lure some more miners over .. there is now a 20MMC bonus for the block finder!is that 20MMC taken from the other pool miners or from your fee?
To lure some more miners over .. there is now a 20MMC bonus for the block finder!
Quote from: pulsarz on December 29, 2013, 12:39:36 amQuote from: badbonez on December 28, 2013, 11:54:31 pmIs there an issue reporting the current hashrate? Because my CPU tells me I am at ~ 3.5 h/m but the extasie site reports me at ~ 1 and going down. When I look at my workers it says I'm not active at all. I have 3 cloud servers also pointed there. I should have at least something to show for it. Speed calculations are still off .. I'll look into it. But it's only a display bug, all the shares are correctly credited Also "fixed" the payout problem, blocks on the pool confirmed before the blocks confirms in the wallet .. I added some MMC as a buffer, everything is properly working now.Just so we're clear: I'm talking about the Dashboard graphic (I can tell the pool payouts are off - and the workers are reporting at khs/hr). When I point my miner from my desktop CPU to your pool it starts out slowly increasing rate until it's close to what my minerd output tells me (~3.5 h/m). But after a while, like an hour or so, the graphic shows my hashrate decreasing slowly to zero. If I quit my miner and restart it, it slowly increases, like it should. The question is: is this a graphic glitch on your end or is there something going wrong on my end? My CPU shows pretty solid and steady usage as seen from the task manager, and the minerd output shows a pretty consistent 3.5 h/m. I'm trying to figure out why there's so much variance in the dashboard reporting. If it's a WIP, that's cool. Just want to be sure.Thanks.
Quote from: badbonez on December 28, 2013, 11:54:31 pmIs there an issue reporting the current hashrate? Because my CPU tells me I am at ~ 3.5 h/m but the extasie site reports me at ~ 1 and going down. When I look at my workers it says I'm not active at all. I have 3 cloud servers also pointed there. I should have at least something to show for it. Speed calculations are still off .. I'll look into it. But it's only a display bug, all the shares are correctly credited Also "fixed" the payout problem, blocks on the pool confirmed before the blocks confirms in the wallet .. I added some MMC as a buffer, everything is properly working now.
Is there an issue reporting the current hashrate? Because my CPU tells me I am at ~ 3.5 h/m but the extasie site reports me at ~ 1 and going down. When I look at my workers it says I'm not active at all. I have 3 cloud servers also pointed there. I should have at least something to show for it.
3rd block! up to 685 and climbing. more power!
need more power. mmcpool smoking us. lol
Currently I cant pay out. My balance more than 1 MCC.
Quote from: Delinquency on December 28, 2013, 04:07:15 amQuote from: pulsarz on December 28, 2013, 03:42:07 amQuote from: Chronos24 on December 28, 2013, 02:31:58 amThank you for the pool! I'm trying it out now and it seems to be working well!Wow, we just found our first block at just 6% of the estimated shares .. No, thank you Chronos24! PM me your mmc address and I'll send you a bonus, just because I feel like it Fee will be 1.5% from now on.This is on the miner-Are 403 errors normal?On the site or miner ?That should only happen if the user & pass aren't correct really.
Quote from: pulsarz on December 28, 2013, 03:42:07 amQuote from: Chronos24 on December 28, 2013, 02:31:58 amThank you for the pool! I'm trying it out now and it seems to be working well!Wow, we just found our first block at just 6% of the estimated shares .. No, thank you Chronos24! PM me your mmc address and I'll send you a bonus, just because I feel like it Fee will be 1.5% from now on.This is on the miner-Are 403 errors normal?
Quote from: Chronos24 on December 28, 2013, 02:31:58 amThank you for the pool! I'm trying it out now and it seems to be working well!Wow, we just found our first block at just 6% of the estimated shares .. No, thank you Chronos24! PM me your mmc address and I'll send you a bonus, just because I feel like it Fee will be 1.5% from now on.
Thank you for the pool! I'm trying it out now and it seems to be working well!
Quote from: pulsarz on December 28, 2013, 03:42:07 amQuote from: Chronos24 on December 28, 2013, 02:31:58 amThank you for the pool! I'm trying it out now and it seems to be working well!Wow, we just found our first block at just 6% of the estimated shares .. No, thank you Chronos24! PM me your mmc address and I'll send you a bonus, just because I feel like it Fee will be 1.5% from now on.Are 403 errors normal?
I get these every time I run cpuminer[2013-12-28 01:09:51] thread 3: 4 hashes, 1.97 khash/s[2013-12-28 01:10:07] JSON-RPC call failed: { "message": "upstream RPC error", "code": -4}[2013-12-28 01:10:07] submit_upstream_work json_rpc_call failed[2013-12-28 01:10:07] ...retry after 30 seconds
I still to work on pushpool from many times already, you sure your pool work right ?How have you fix the hash for be right on "RC", "hash32[7]" and "hash[27]" checks ? If you are not do it (simple bypass), you can still to search a blocks for all your life :-)FaSan
Using CPUminer I am unable to connect. My settings are:Code: [Select]"minerd.exe" -o stratum+tcp://extasie.net:3333 -O user.worker:password --threads=8 Do I have this wrong?Thanks.
"minerd.exe" -o stratum+tcp://extasie.net:3333 -O user.worker:password --threads=8