Updated M7k version of yam miner is available. It contains reduced memory mode for MMC, improved performance and connection stability.
M7k version of yam allows efficient CPU mining of MemoryCoin with all threads even with 1Gb RAM used for mining.
yam M7k runs significantly faster on AVX2 CPUs (Haswell) and has improved CPU load profile for overclocked configurations.
yam M7k fixes disconnect issues with some MMC mining pools that use get work protocol.
As usual, download at
https://www.dropbox.com/sh/jvp4wwek8jpohj7/RlW6hzYqTz
https://mega.co.nz/#F!h0tkXSxZ!f62uoUXogkxQmP2xO8Ib-g
http://sdrv.ms/18wfjYX
http://pan.baidu.com/s/1xOOWa
yvg1900
What version should i use for a i5-3570?
Don't got the K version.
threads = 24
mining-params = mmc:av=0&aesni=on&m=22528&donation-interval=100
#!/bin/bash
echo always > /sys/kernel/mm/transparent_hugepage/enabled;
killall -9 yam;
killall -9 screen;
screen -mD taskset -c 0-11 ~/yam --config yam-mmc.cfg &
screen -mD taskset -c 12-23 ~/yam --config yam-mmc2.cfg &
threads = 12
mining-params = mmc:av=1&aesni=on&donation-interval=100&m=12288
mine = getwork://M869Fke4cHqJnUVZRvhdMHe45JW1pLprof@work.mmcpool.com:8880:8881:8882:8883/mmc
compact-stats = 0
print-timestamps = 0
threads = 12
mining-params = mmc:av=1&aesni=on&donation-interval=100&m=11264
mine = getwork://M869Fke4cHqJnUVZRvhdMHe45JW1pLprof@work.mmcpool.com:8880:8881:8882:8883/mmc
compact-stats = 0
print-timestamps = 0
chmod +x mmc.sh;./mmc.sh;
I notice that the new version doesnt have a constant 99.9-100% peg on each thread, it fluctuates alot between 92-98 on each threads and rarely pegs at 99.9-100%
Is this by design, surely such fluctuations would kill extra hashrate ?
Dual L5639 CONFIG:
:P
mmc.shCode: [Select]#!/bin/bash
echo always > /sys/kernel/mm/transparent_hugepage/enabled;
killall -9 yam;
killall -9 screen;
screen -mD taskset -c 0-11 ~/yam --config yam-mmc.cfg &
screen -mD taskset -c 12-23 ~/yam --config yam-mmc2.cfg &
yam-mmc.fgCode: [Select]threads = 12
mining-params = mmc:av=1&aesni=on&donation-interval=100&m=12288
mine = getwork://M869Fke4cHqJnUVZRvhdMHe45JW1pLprof@work.mmcpool.com:8880:8881:8882:8883/mmc
compact-stats = 0
print-timestamps = 0
yam-mmc2.cfgCode: [Select]threads = 12
mining-params = mmc:av=1&aesni=on&donation-interval=100&m=12288
mine = getwork://M869Fke4cHqJnUVZRvhdMHe45JW1pLprof@work.mmcpool.com:8880:8881:8882:8883/mmc
compact-stats = 0
print-timestamps = 0
Start--Code: [Select]chmod +x mmc.sh;./mmc.sh;
This assumes that you only have 24GB and occupying less than 1GB RAM.
uses Screen and taskset.
12.5+ H/m
--Nehalem core
I notice that the new version doesnt have a constant 99.9-100% peg on each thread, it fluctuates alot between 92-98 on each threads and rarely pegs at 99.9-100%
Is this by design, surely such fluctuations would kill extra hashrate ?
That would be the case if you use m=1024 and many threads. In this case mining will suffer from inter-thread sync contention.
Max perf can be obtained when m=1024*numberOfThreads, which is exactly the config from prev version.
Binding the process to each physical socket performs roughly the same as taskset
Binding the process to each physical socket performs roughly the same as taskset
Did you measure exact HPM values? Does OS really support NUMA? What is output of
numactl --hardware
yvg1900
available: 2 nodes (0-1)
node 0 cpus: 0 1 2 3 4 5 12 13 14 15 16 17
node 0 size: 12278 MB
node 0 free: 123 MB
node 1 cpus: 6 7 8 9 10 11 18 19 20 21 22 23
node 1 size: 12288 MB
node 1 free: 990 MB
node distances:
node 0 1
0: 10 20
1: 20 10
MMC Agg. SPM: 12.304, HPM: 12.943; Rnds C/I: 9919/2596, Don. C/I: 109/22; Cfg/Wkr SPM: 12.304/0.5804, Cfg/Wkr HPM: 12.945/0.5884 10028 rnds AV=1, ART=101969
I'm crashing with no errorcode right from the getgo on a rented XEON E5-2620 which is Sandy Bridge supposedly.
I have 8 GB of RAM avail. OS is Server 2008 R2.
threads = 1
mining-params = mmc:av=1&aesni=on&m=2048
mine = getwork://MEUKuddxchGRtPxJyTTd2dLcCrKTmCh5FW@work.mmcpool.com:80:8880:8881:8882:8883/mmc
mine = getwork://MEUKuddxchGRtPxJyTTd2dLcCrKTmCh5FW@mmcpool.1gh.com:8080:8081:8082:8083/mmc
mine = getwork://yvg1900.mmc_1:x@mmc.gpools.com:8080/mmc
#proxy = socks4a://127.0.0.1:9150
compact-stats = 0
print-timestamps = 1
I tried diff num of threads, mem, and aesni=off
?? lol
threads = 0
mining-params = mmc:av=1&aesni=on&m=1024
#proxy = socks4a://127.0.0.1:9150
compact-stats = 1
print-timestamps = 0
Hello guys, just started mining MMC and using yamIt's great!
Getting this on a 4930k
MMC Agg. SPM: 16.580, HPM: 15.392;
is it any good?
EDIT:
Using this:
Ivy-bridge yam-yvg1900-M7k-win64-ivy-bridgeCode: [Select]threads = 0
mining-params = mmc:av=1&aesni=on&m=1024
#proxy = socks4a://127.0.0.1:9150
compact-stats = 1
print-timestamps = 0
Any room for optimizations?
Thanks,
Hello guys, just started mining MMC and using yamIt's great!
Getting this on a 4930k
MMC Agg. SPM: 16.580, HPM: 15.392;
is it any good?
EDIT:
Using this:
Ivy-bridge yam-yvg1900-M7k-win64-ivy-bridgeCode: [Select]threads = 0
mining-params = mmc:av=1&aesni=on&m=1024
#proxy = socks4a://127.0.0.1:9150
compact-stats = 1
print-timestamps = 0
Any room for optimizations?
Thanks,
Since I see you're using all the cores / threads (threads=0), you can also improve it by giving it more memory (m=1024 means use a total of 1gb mem. The maximum is 1024 per thread max).
If what you've pasted is what you're using, you're using 1gb IN TOTAL for all threads (m=1024).Hello guys, just started mining MMC and using yamIt's great!
Getting this on a 4930k
MMC Agg. SPM: 16.580, HPM: 15.392;
is it any good?
EDIT:
Using this:
Ivy-bridge yam-yvg1900-M7k-win64-ivy-bridgeCode: [Select]threads = 0
mining-params = mmc:av=1&aesni=on&m=1024
#proxy = socks4a://127.0.0.1:9150
compact-stats = 1
print-timestamps = 0
Any room for optimizations?
Thanks,
Since I see you're using all the cores / threads (threads=0), you can also improve it by giving it more memory (m=1024 means use a total of 1gb mem. The maximum is 1024 per thread max).
Thanks for your input!
I am currently using 1GB per thread, so around 12GB since my CPU can do 12 threads?
Not sure if I should go higher, only got 16GB of RAM.
I'm crashing with no errorcode right from the getgo on a rented XEON E5-2620 which is Sandy Bridge supposedly.
I have 8 GB of RAM avail. OS is Server 2008 R2.
threads = 1
mining-params = mmc:av=1&aesni=on&m=2048
mine = getwork://MEUKuddxchGRtPxJyTTd2dLcCrKTmCh5FW@work.mmcpool.com:80:8880:8881:8882:8883/mmc
mine = getwork://MEUKuddxchGRtPxJyTTd2dLcCrKTmCh5FW@mmcpool.1gh.com:8080:8081:8082:8083/mmc
mine = getwork://yvg1900.mmc_1:x@mmc.gpools.com:8080/mmc
#proxy = socks4a://127.0.0.1:9150
compact-stats = 0
print-timestamps = 1
I tried diff num of threads, mem, and aesni=off
?? lol
open cmd.exe,
cd "DIROFYAM"
yam.exe -c yam-mmc.cfg
--
get results,
paste here.
Oh. You're trying to buffer 2GB for one thread. You must run two threads to buffer 2GB of RAM.
threads = 12
mining-params = mmc:av=1&aesni=on&donation-interval=100&m=6144
mine = getwork://WALLETADDRESS@moria.dwarfpool.com:8080:8081:8082:8083/mmc
mine = getwork://WALLETADDRESS@erebor.dwarfpool.com:8080:8081:8082:8083/mmc
compact-stats = 1
print-timestamps = 0
have an i5 3230m downloaded ivy bridge. application file has a red exclamation mark in the icon. miner crashes instantly, following other ppl config that say its working and still fails. what file do I make with the application file is it a batch file? I feel lost any helpers
Code: [Select]threads = 12
mining-params = mmc:av=1&aesni=on&donation-interval=100&m=6144
mine = getwork://WALLETADDRESS@moria.dwarfpool.com:8080:8081:8082:8083/mmc
mine = getwork://WALLETADDRESS@erebor.dwarfpool.com:8080:8081:8082:8083/mmc
compact-stats = 1
print-timestamps = 0
Do you run an AV or Anti-Malware?
Troubleshooter:
- Disable Antivirus/AntiMalware
- Redownload the YAM Program [the exe may have been corrupted]
- Try a different YAM build
- Disable Firewall or Allow the program to pass through Firewall
- Look to install your CPU or Motherboard's specific Chipset drivers
Hello!As you said - it works when you set aesni to off, since this CPU doesn't support AES-NI. So that's your only option.
I try to get your miner working on Ubuntu 12.04, CPU is a Intel Core 2 Quad Q9550.
The binaries yam-yvg1900-M7k-linux64-core2 and yam-yvg1900-M7k-linux64-generic both fail (crash) during MMC check:
Miner version: yam M7k-linux64-core2/yvg1900
Checking target [getwork:// abcd ]...
Target OK
Checking params [mmc:av=1&aesni=on&m=1024]...
Params OK
Checking MMC Stage 1 optimizations compatibility...
Checking MMC Stage 2 optimizations compatibility...
Ungültiger Maschinenbefehl (Speicherabzug geschrieben)
(-> Illegal instruction (core dumped))
It does work with aesni=off
What can I do?
Felix
I cannot get YAM to even run. It starts then closes the command console. I have tried as admin and several ways.Hey,
Any ideas what I am doing wrong?
I have an AMD A8-5557M Quad Core.
8GB of Ram.
I tried this setup just to get it running at first and tweak from there but it just closes as soon as it opens.
I appreciate the help.Quote#av=1 is HT-friendly. On 4-core with HT you shall run it 8 threads and 1Gb RAM per thread.
#av=3 is for non-HT. If you plan to run 4 threads on HT mach, ensure that you select av=3. The best is if you can pin your threads to cores to unlock full potential of av=3.
#av=2 is mediocre. In between 1 and 3, but you may give it a try.
#av=4 is for older AMD CPUs, ppl reported this was the best in some cases.
#av=5 is targeting Atoms in 64-bit mode, has completely different mem usage. Very slow one, but still faster than original one.
threads = 3
mining-params = mmc:av=3&aesni=on
mine = getwork://MTp2Wy8g2i23ximwoWJiVmAoaLLsmSKnxu@erebor.dwarfpool.com:8080:8081:8082:8083/mmc
mine = getwork://MTp2Wy8g2i23ximwoWJiVmAoaLLsmSKnxu@moria.dwarfpool.com:8080:8081:8082:8083/mmc
compact-stats = 1
print-timestamps = 0
yam -c yam-mmc.cfg
I used the generic YAM version as none of the others seemed to be the correct one for the Richland AMD CPU.I'll leave this one to yvg1900 as I don't really know which miner should be downloaded for AMD (generic does sound like the logical choice though).
I do have the cfg in the same folder.
I can't even get it to run at all it just opens and closes. I have no idea what is messed up here. I don't have any issues running any other command line mining software.
This one has me stumped.
I have been perusing the other thread that was mentioned to try and see if I can figure out what I am doing wrong as well.
Frustrating as I know this would boost my performance over mc2.
I cannot even get it to run in finetune mode either.
So far I have it running it has more than doubled my HPM.Great!
I will enable hugepages next. Hopefully that boosts a bit more as well.
So far I have it running it has more than doubled my HPM.Great!
I will enable hugepages next. Hopefully that boosts a bit more as well.
Very glad to hear that :)
I used the generic YAM version as none of the others seemed to be the correct one for the Richland AMD CPU.I'll leave this one to yvg1900 as I don't really know which miner should be downloaded for AMD (generic does sound like the logical choice though).
I do have the cfg in the same folder.
I can't even get it to run at all it just opens and closes. I have no idea what is messed up here. I don't have any issues running any other command line mining software.
This one has me stumped.
I have been perusing the other thread that was mentioned to try and see if I can figure out what I am doing wrong as well.
Frustrating as I know this would boost my performance over mc2.
I cannot even get it to run in finetune mode either.
Also, are you running it from the command line or a batch file?
You could try to see what the error is either by adding "pause" to the batch file or simply running it from the command line and checking the printouts.
threads = 3
mining-params = mmc:av=0&aesni=on&m=1024
mine = getwork://MTp2Wy8g2i23ximwoWJiVmAoaLLsmSKnxu@moria.dwarfpool.com:8080:8081:8082:8083/mmc
mine = getwork://MTp2Wy8g2i23ximwoWJiVmAoaLLsmSKnxu@mmcpool.1gh.com:8080:8081:8082:8083/mmc
compact-stats = 1
print-timestamps = 0
threads = 3
mining-params = mmc:av=1&aesni=on&m=1024
mine =
getwork://MTp2Wy8g2i23ximwoWJiVmAoaLLsmSKnxu@moria.dwarfpool.com:8080:8081:8082:8083
/mmc
mine =
getwork://MTp2Wy8g2i23ximwoWJiVmAoaLLsmSKnxu@mmcpool.1gh.com:8080:8081:8082:8083/mmc
#proxy = socks4a://127.0.0.1:9150
compact-stats = 1
print-timestamps = 0
Proxy line is commented out, so no difference. I'd leave av=0 and let finetuning select best one. The rest looks OK, and try bdver2 for sure.
Follow @yvg1900 on Twitter to get updates on performance mining software
threads = 0
mining-params = mmc:av=2&aesni=on&m=16384
mine = getwork://walletaddr@work.mmcpool.com:80:8880:8881:8882:8883/mmc
mine = getwork://walletaddr@mmcpool.1gh.com:8080:8081:8082:8083/mmc
compact-stats = 1
print-timestamps = 0
change to av=1Thank for the great miner
Does this result sound ok ?
MMC Agg. SPM: 24.648, HPM: 24.159; Rnds C/I: 152/16, Don. C/I: 79/0; Cfg/Wkr SPM: 24.648/1.6044, Cfg/Wkr HPM: 24.105/1.5066 231 rnds AV=2, ART=39825
Its a dual socket E5-2650 2Ghz 8 core 20M cache with 128GB Ram Baremetal running 64Precise
using numactl as you suggested have about the same total performance.
using yam-sandy-bridge
Here is my cfg file:Code: [Select]threads = 0
change to av=1
mining-params = mmc:av=2&aesni=on&m=16384
mine = getwork://walletaddr@work.mmcpool.com:80:8880:8881:8882:8883/mmc
mine = getwork://walletaddr@mmcpool.1gh.com:8080:8081:8082:8083/mmc
compact-stats = 1
print-timestamps = 0
got
MMC Agg. SPM: 26.581, HPM: 26.553; Rnds C/I: 2048/160, Don. C/I: 79/3; Cfg/Wkr SPM: 26.581/1.6854, Cfg/Wkr HPM: 26.554/1.6597 2127 rnds AV=1, ART=36152
yam -c yam-mmc.cfgIt should run then with no problems.
I am sorry if you already covered this. I just read through the 5 pages with no luck finding a solution for me.
I am new to YAM, I have successfully ran all other miners (CPU/GPU alike) on all 7 of my pc's. I can not get YAM to run. First I wasnt sure which file to download, I tried, generic, barcelona and nehalem with no luck. I attempted to edit the example file like suggested in the readme. I saved, went into yam folder and clicked it. It just popped up and closed in all cases. I attempted to do a bat file, which I am comfortable with, not sure I did it right. Did the same thing.
I am not sure what I am doing wrong. Any assistance would be appreciated. I have 3-i5's and 3-i7's that I will be adding YAM too, once I am able to figure out how to use this program.
Windows 7 Pro 64bit
AMD Phenom II x4 B50 (K10 Architecture), Code Name Deneb with 4 gb
Thanks for any assistance,
Dave
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Mining\yam--generic\win64-generic>yam -c yam-mmc.cfg
YAM - Yet Another Miner by yvg1900
yam M7m-win64-generic/yvg1900
***************************************************
***************************************************
Miner version: yam M7m-win64-generic/yvg1900
Error: Can not enable [SeLockMemoryPrivilege] privilege, error=1300
Warning: Huge Pages not available, performance may degrade
Error: At least one mining target shall be defined with --mine parameter
C:\Mining\yam--generic\win64-generic>
QuoteMicrosoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Mining\yam--generic\win64-generic>yam -c yam-mmc.cfg
YAM - Yet Another Miner by yvg1900
yam M7m-win64-generic/yvg1900
***************************************************
***************************************************
Miner version: yam M7m-win64-generic/yvg1900
Error: Can not enable [SeLockMemoryPrivilege] privilege, error=1300
Warning: Huge Pages not available, performance may degrade
Error: At least one mining target shall be defined with --mine parameter
C:\Mining\yam--generic\win64-generic>
Ok I tried that and I got this error.
EDIT, I attempted to add administrator privileges and to automatically closes.
Problem signature:
Problem Event Name: APPCRASH
Application Name: yam.exe
Application Version: 0.0.0.0
Application Timestamp: 52f7face
Fault Module Name: yam.exe
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 52f7face
Exception Code: c000001d
Exception Offset: 0000000000096b04
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: e96b
Additional Information 2: e96bf2a863bb961420a24718873a513f
Additional Information 3: 8d46
Additional Information 4: 8d46475bbff6dd51de6b4243ffafa468
Yes it supports it, its a K10 architecture. I am trying to use generic.
Yes it supports it, its a K10 architecture. I am trying to use generic.
Earlier you mentioned you are testing on some AMD Phenom. Is this yours CPU?
http://www.cpu-world.com/cgi-bin/CPUID.pl?CPUID=6498
Can you post here output of HwInfo64 or other tool showing AES-NI is supported by your CPU?
AFAIK, Phenom x4 9750 => no AES-NI
http://www.cpu-world.com/CPUs/K10/AMD-Phenom%20X4%209750%20-%20HD9750WCJ4BGH%20(HD9750WCGHBOX).html
Am I wrong?
I think you are right. I don't think it was introduced until the Phenom II.AFAIK, Phenom x4 9750 => no AES-NI
http://www.cpu-world.com/CPUs/K10/AMD-Phenom%20X4%209750%20-%20HD9750WCJ4BGH%20(HD9750WCGHBOX).html
Am I wrong?
For those who haven't realized,
Version M now available: Update your YAM!
Very cool I had not known that.My servers report around a 30-50% increase in hashing power.
So are there even more optimizations?For those who haven't realized,
Version M now available: Update your YAM!
Very cool I had not known that.My servers report around a 30-50% increase in hashing power.
So are there even more optimizations?For those who haven't realized,
Version M now available: Update your YAM!
Hello new here and not that technically able yet.
Have got minerd = MC2miner from www.mmcpool.com running on my Acer Aspire 5553 Notebook, 2.0ghz, Amd phenom II x4 Mobile processor n930, 8gb ram, ati Mobility Radion HD4250 graphics (so no help there), Window 7.
http://www.cpu-world.com/CPUs/K10/AMD-Phenom%20II%20Quad-Core%20Mobile%20N930%20-%20HMN930DCR42GM.html
Only getting Stats 0.342 H/M ish..
Cannot get Yam to work. Can any one help with the correct details and bat file?
Also shame no one put this on the front of MC2miner minerd, would be easier for new people to use, I think https://litecointalk.org/index.php?topic=67.0
Cheers in advance..
My CPU is Intel Pentium Dual Core T2390Generic
Which Version Should I Download
Thanks DelinquencyYou will want to run the Non-AES mc2miner at https://bitsharestalk.org/index.php?topic=2042.0&tm=1392754507931.
I have two questions
First there is no yam.exe file in generic (yam-yvg1900-M7m-win64-generic) folder so how to run it
Second this is what i got when i used yam.exe from core2 folder(http://s2.postimg.org/cd3h5rsy1/image.jpg)
Guys, please help me with installation on linux.
I have VPS in cloud with proc, having aes-ni support, but even with aesni=off i got this:
(-> Illegal instruction (core dumped))
On my windows everything is ok, farming with aesni=on.
Maybe i must install some dependencies ?
Guys, please help me with installation on linux.
I have VPS in cloud with proc, having aes-ni support, but even with aesni=off i got this:
(-> Illegal instruction (core dumped))
On my windows everything is ok, farming with aesni=on.
Maybe i must install some dependencies ?
Just try a different version of YAM.
Guys, please help me with installation on linux.
I have VPS in cloud with proc, having aes-ni support, but even with aesni=off i got this:
(-> Illegal instruction (core dumped))
On my windows everything is ok, farming with aesni=on.
Maybe i must install some dependencies ?
I only get that error if I run a YAM executable that is not compatible with my processor.
Please check on your processor type again.
Just try a different version of YAM.
i downloaded correct version ivy-bridge, my proc has ivy-bridge architecture, but yam don't work :( how can i check what is illegal instruction i have? Please help
numactl -s
policy: default
preferred node: current
physcpubind: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
cpubind: 0
nodebind: 0
membind: 0
numactl -H
available: 1 nodes (0)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
node 0 size: 30681 MB
node 0 free: 28979 MB
node distances:
node 0
0: 10
Unhandled exception at 0x005d237e in yam.exe: 0xC000001D: Illegal Instruction.
> yam.exe!00000000005d237e()
[Frames below may be incorrect and/or missing, no symbols loaded for yam.exe]
yam.exe!00000000004e7389()
yam.exe!00000000005e756e()
yam.exe!00000000004013b5()
yam.exe!00000000004014d8()
kernel32.dll!0000000076c3652d()
ntdll.dll!0000000076d6c541()
I have a problem with the version 2 for Bulldozer, it crash right after printing a welcome message with the donations addresses etc.Code: [Select]Unhandled exception at 0x005d237e in yam.exe: 0xC000001D: Illegal Instruction.
This what I get from debugger (maybe its going to help)Code: [Select]> yam.exe!00000000005d237e()
[Frames below may be incorrect and/or missing, no symbols loaded for yam.exe]
yam.exe!00000000004e7389()
yam.exe!00000000005e756e()
yam.exe!00000000004013b5()
yam.exe!00000000004014d8()
kernel32.dll!0000000076c3652d()
ntdll.dll!0000000076d6c541()
System: Windows 7 x64
CPU: AMD FX-8150 Stock
I have to note that version 1 work just fine with the performance of about 6.9HPM (3.6GHz, Turbo Off)
start /low yam.exe -c yam-mmc.cfg
threads = 2
mining-params = mmc:av=0&aesni=on&donation-interval=100&m=2048
mine = getwork://myaddreess@mmcpool.1gh.com:8080:8081:8082:8083/mmc
compact-stats = 1
print-timestamps = 0
it does not work
Thanks Yvg1900!
I'm a newbie, and just got a problem when I run with a Haswell-EP Xeon E-2600 CPU to mine the MMC, This is a Haswell CPU. But it seems the program always auto exit after below message:
-----------------------------------------------------------------
Checking MMC Stage 1 optimizations compatibility...
Checking MMC Stage 2 optimizations compatibility...
-----------------------------------------------------------------
I have tried each type folder, still the same issue.
but I can run the same program to mine the PTS on this CPU successfully. what's the problem? Is this CPU compatible with xpt protocol but getwork protocol?
very appreciate if you can answer my question.
Thanks Yvg1900!
I'm a newbie, and just got a problem when I run with a Haswell-EP Xeon E-2600 CPU to mine the MMC, This is a Haswell CPU. But it seems the program always auto exit after below message:
-----------------------------------------------------------------
Checking MMC Stage 1 optimizations compatibility...
Checking MMC Stage 2 optimizations compatibility...
-----------------------------------------------------------------
I have tried each type folder, still the same issue.
but I can run the same program to mine the PTS on this CPU successfully. what's the problem? Is this CPU compatible with xpt protocol but getwork protocol?
very appreciate if you can answer my question.
Are you 100% sure you have Haswell-EP CPU? What is EXACT CPU model?
YAM - Yet Another Miner by yvg1900
yam M7m-win64-sandy-bridge/yvg1900
***************************************************
* Supported coins: PTS *
* Author: yvg1900 (Twitter @yvg1900) *
* XPT protocol: jh (http://ypool.net) *
* *
* Addresses for Thanks and Donations: *
* PTS: PZxsEQoiMeB6tHcW2ZySBEiCPio1WkxbEL *
* XPM: AW2388DEWNEfMH4rP9kcj9yKcMq1QywYT4 *
* DTC: D6PmUogMigWvXurgFTqm5VLxQeVpXdYQj3 *
* MMC: MVk7PuJCa9o6qTYeiQRJDd3uHxKXMrQuU6 *
* LTC: Lby4YjhcAxhmbsdHFb4nYydrwGoiJezZt1 *
* BTC: 1FxekeK5La7AuF3oxiLzPKnjXyLMrux6VT *
* NMC: N9KXqmzEqP7gB2dGHpEZiRMgFjUHNM38FR *
***************************************************
Loading config file [yam-mmc--dwarf.cfg]
Miner version: yam M7m-win64-sandy-bridge/yvg1900
Error: Can not enable [SeLockMemoryPrivilege] privilege, error=1300
Warning: Huge Pages not available, performance may degrade
Checking target [getwork://M97rDbHuY9e68cNCJwUm3dYSjzzinQWZ6d@erebor.dwarfpool.c
om:8080:8081:8082:8083/mmc]...
Target OK
Checking target [getwork://M97rDbHuY9e68cNCJwUm3dYSjzzinQWZ6d@moria.dwarfpool.co
m:8080:8081:8082:8083/mmc]...
Target OK
Checking target [getwork://M97rDbHuY9e68cNCJwUm3dYSjzzinQWZ6d@work.mmcpool.com:8
0:8880:8881:8882:8883/mmc]...
Target OK
Checking params [mmc:av=1&aesni=on]...
Params OK
Checking MMC Stage 1 optimizations compatibility...
Checking MMC Stage 2 optimizations compatibility...
OK: MMC optimizations are compatible
MemoryCoin: Memory usage 1024M, Algorithm Variation 1
Using 8 mining threads as 1 workers
Warning: MemoryCoin2 memory block for thread 0 allocated in non-hugepages memory
- thread performance may degrade
Will mine 4 rounds for miner developers to support development of the next ver
sion
Follow @yvg1900 on Twitter to get information on new version availability on t
ime
New MemoryCoin Block nTime 1393610461
MMC Agg. SPM: ?, HPM: ?; Rnds C/I: 0/0, Don. C/I: 0/0; Cfg/Wkr SPM: ?/?, Cfg/Wkr
HPM: ?/? 0 rnds AV=1, ART=?
erebor.dwarfpool.com: On-line, Shares Submitted 0, Accepted 0
moria.dwarfpool.com: Idle, Shares Submitted 0, Accepted 0
work.mmcpool.com: Idle, Shares Submitted 0, Accepted 0
Found solution - 5670 / 1968 / 3192946454
Share found!
getwork: Rejected share, reason: false
New MemoryCoin Block nTime 1393610433
threads = 0
mining-params = mmc:av=1&aesni=on
mine = getwork://M97rDbHuY9e68cNCJwUm3dYSjzzinQWZ6d@erebor.dwarfpool.com:8080:8081:8082:8083/mmc
mine = getwork://M97rDbHuY9e68cNCJwUm3dYSjzzinQWZ6d@moria.dwarfpool.com:8080:8081:8082:8083/mmc
mine = getwork://M97rDbHuY9e68cNCJwUm3dYSjzzinQWZ6d@work.mmcpool.com:80:8880:8881:8882:8883/mmc
compact-stats = 1
print-timestamps = 0
Are there more optimization in the n version that was released quietly?
I just saw it was out.
Are there more optimization in the n version that was released quietly?
I just saw it was out.
MMC code contains minor changes in M7n, but has some reliability related changes in networking code, as well as support for more pools (incl. dwarfpool for mmc).
You can find change info @yvg1900 on Twitter.
Update......got the miner working by dropping mem to 7168. How do I know if I am getting best hash rate with this CPU....it says HPM: 4.942?
Srry i said i have i5 2570k but its 3570k i5`s. When I start yam.exe -c yam-mmc.cfg, ma message with "yam.exe stopped working" pops up. Any help? I tried with my i5 2410m Sandy Bridge and it worked well with no problems.u mind post your config?
Is there any log files?
mining-params = mmc:av=1&aesni=on&m=1024
Tried and didnt work too. The miner in the MMC wallet is working fine, btw.I've noticed it's happening on old Windows OS...
Hey bud.....I am still having a problem with GMiner crashing at intermittent times when running YAM. I also still get the message in the beginning of the non hugepages and thread degradation, not sure if resolving this would resolve the crashing of GMiner.
Any suggestions?
Thanks!
Sorry for flooding this thread with questions. I hope it is OK to ask a few more. This time I am trying to understand yam's output.
In particular, it would be great if someone could give me a pointer to the following things, as I couldn't find anything usuable about it so far.
- What is the meaning of Rnds C/I, Don. C/I, rnds, and ART?
- Solutions vs shares: I know the concept of a share, which is a possible block candidate and which is usually accepted by the pool unless someone else submitted this share already. However, what is the difference to a solution? When does a solution lead to a share?
- What is the meaning of the three numbers following the 'Found solution' message?
Furthermore, is there any documentation on the difference between the various AV settings?
Many thanks in advance...
hi! and do not tell me how to run the yam through socks4 proxy (under ubuntu) I have set there tsocks, but still yam miner can not connect through it. if you write a line in the config proxy = socks4 :/ / 192.196.1.1:7155 writes that he did not know of such a protocol! tell me how to do it. the other miners normally through tsocks work!
#proxy = socks4a://127.0.0.1:9150
If you are still getting error on HugePages you shall check docs on how to enable it - makes sense. Docs are included in yam distribution.Yep, did it.
As of multiple pools, yam does NOT mine for multiple pools - it tries to mine as much as possible for 1st pool in the list (topmost defined on config or first appearing on command line), and if that one is not available, falls back to mine at others. So other pools listed are "backup" pools that serve as reserve mining option when first (primary) pool is unavailable (due to DDoS, maintenance, etc).Ok thanks for the info, makes sense
threads = 4
mining-params = mmc:av=1&aesni=off&m=3072&donation-interval=50
mine = getwork://MB7KWMzDaj3ihsEpHg7oAZhBGW4CMYPgyh@mmcpool.1gh.com:8080:8081:8082:8083/mmc
mine = getwork://MB7KWMzDaj3ihsEpHg7oAZhBGW4CMYPgyh@work.mmcpool.com:80:8880:8881:8882:8883/mmc
mine = getwork://MB7KWMzDaj3ihsEpHg7oAZhBGW4CMYPgyh@erebor.dwarfpool.com:8080:8081:8082:8083/mmc
mine = getwork://MB7KWMzDaj3ihsEpHg7oAZhBGW4CMYPgyh@moria.dwarfpool.com:8080:8081:8082:8083/mmc
mine = getwork://yvg1900.mmc_1:x@mmc.gpools.com:8080/mmc
#proxy = socks4a://127.0.0.1:9150
compact-stats = 1
print-timestamps = 0
cd C:\yam-yvg1900-M7p-win64-ivy-bridge\yam-yvg1900-M7p-win64-ivy-bridge\win64-ivy-bridge
start /low /affinity 3f yam.exe -c yam-mmc.cfg
Yam.exe crashes as soon as I run it.
i5-3210M @ 2.5GHz
4GB Ram
Win7 64-bit
Running ivy-bridge version of YAMCode: [Select]threads = 4
mining-params = mmc:av=1&aesni=off&m=3072&donation-interval=50
mine = getwork://MB7KWMzDaj3ihsEpHg7oAZhBGW4CMYPgyh@mmcpool.1gh.com:8080:8081:8082:8083/mmc
mine = getwork://MB7KWMzDaj3ihsEpHg7oAZhBGW4CMYPgyh@work.mmcpool.com:80:8880:8881:8882:8883/mmc
mine = getwork://MB7KWMzDaj3ihsEpHg7oAZhBGW4CMYPgyh@erebor.dwarfpool.com:8080:8081:8082:8083/mmc
mine = getwork://MB7KWMzDaj3ihsEpHg7oAZhBGW4CMYPgyh@moria.dwarfpool.com:8080:8081:8082:8083/mmc
mine = getwork://yvg1900.mmc_1:x@mmc.gpools.com:8080/mmc
#proxy = socks4a://127.0.0.1:9150
compact-stats = 1
print-timestamps = 0
Start YAM withCode: [Select]cd C:\yam-yvg1900-M7p-win64-ivy-bridge\yam-yvg1900-M7p-win64-ivy-bridge\win64-ivy-bridge
start /low /affinity 3f yam.exe -c yam-mmc.cfg
HALP :)
*Note: I have this running successfully on multiple PCs. I just have an issue with this one.*
Same result.
Does yam require Win 7 SP1?
I copied it to C:\ and manually tried to start it inside the command prompt. As soon as I hit enter it crashes.
Same result.
Does yam require Win 7 SP1?
SP1 resolved the issue. It bombed every time without it. As soon as I installed it YAM ran like a charm :)
Thanks for the help!
hello
i found yam miner great but not working my i3-2120 sandy-bridge win 7 x64 home premium with sp1 i start the miner and crash windows says yam.exe shuting down
i use yam-yvg1900-M7q-win64-sandy-bridge
but i try generic version and working but i think slow 300 khs aprx
my cfg :
threads = 4
mining-params = grs:av=0&donation-interval=50
mine = stratum+tcp://echo00114.2:xx@grs.cpu-pool.net:3650/grs
#proxy = socks4a://127.0.0.1:9150
#proxy = socks5://127.0.0.1:1080
compact-stats = 1
print-timestamps = 0
any ideas why not working sandy bridge wersion i try 3 machine same config also not working.
update 2 : core 2 version of yam also working i3-2120 and i3 2100 this coins grs speed 500 khs of yam-yvg1900-M7q-win64-core2 500 khs aprox
thanx
2.2. Instruction set requirements for GroestlCoin mining
Note that GRS mining for AVX and AVX2 instruction sets require AES-NI support. AES-NI support required by GRS algorithm implementations
in following builds:
sandy-bridge
ivy-bridge
haswell
bdver1
bdver2
btver2
If your CPU supports AVX, but does not support AES-NI, consider using other builds.
yvg1900
what's new in release q and release r??
hello
i planing buying the new rig
my question the amd a8 series processor support your miner ?
i looking this processor AMD A8 5600K AMD A8 5500 also supporting avx and aes-ni i planing groestl coin mining
my question wich miner support this avx aes-ni the mining 2x fast this feature using ?
this two link i hope help you
http://www.guru3d.com/articles_pages/amd_a8_5600k_review_apu,7.html (http://www.guru3d.com/articles_pages/amd_a8_5600k_review_apu,7.html)
http://www.cpu-world.com/CPUs/Bulldozer/AMD-A8-Series%20A8-5500.html (http://www.cpu-world.com/CPUs/Bulldozer/AMD-A8-Series%20A8-5500.html)
i read the readme i see opteron supporting i hope this amd also support some version.
thanx
i am running fc20 of ppc64 on ibm cpu( POWER7), can you make and release binaries for power7 cpu?
Mining Params OK
Checking MMC Stage 1 optimizations compatibility...
Checking MMC Stage 2 optimizations compatibility...
zsh: illegal hardware instruction ./yam -c yam-mmc.cfg
Of course I have tried different versions:YAM does not work for me, can someone help me? I always get "illegal hardware instruction" error:Code: [Select]Mining Params OK
Of course I have tried different versions:
Checking MMC Stage 1 optimizations compatibility...
Checking MMC Stage 2 optimizations compatibility...
zsh: illegal hardware instruction ./yam -c yam-mmc.cfg
yam-yvg1900-M7v-linux64-generic.tgz
yam-yvg1900-M7v-linux64-core2.tgz
yam-yvg1900-M7v-linux64-nehalem.tgz
But all them give exactly the same error. My CPU is Intel Xeon X3450@2.8GHz (4 cores, 8 hardware threads). Do any of the Linux binaries work for anybody? It feels like all files are compiled for much newer architecture than advertised...