BitShares Forum
Main => General Discussion => Topic started by: liondani on July 20, 2014, 03:53:14 am
-
I have on my balance 1.29643 BTSX
and I can't register any other accounts due to insufficient funds!!!
I can't transfer to other account's for the same reason
any thoughts?
-
On preferences I give logout time in seconds 999999.
But without any notice it gets logout on random times !!!
(Windows 7 32bit)
-
on "my Accounts" I see pending status for the transactions that have to do with "register to delegate" accounts...
but on "directory" I can see them as delegates on the standby list
???
-
I used the command
wallet_clear_pending_transactions
the funds are removed from the account I was sending but they never appeared on the account I send them...
has it to do with
wallet_rescan_blockchain
that not work because delegates are present?
and how can I make a blockscan on windows?
-
I used the command
wallet_clear_pending_transactions
the funds are removed from the account I was sending but they never appeared on the account I send them...
has it to do with
wallet_rescan_blockchain
that not work because delegates are present?
and how can I make a blockscan on windows?
you can disable producing blocks, then rescan
来自我的 GT-N7100 上的 Tapatalk
-
I used the command
wallet_clear_pending_transactions
the funds are removed from the account I was sending but they never appeared on the account I send them...
has it to do with
wallet_rescan_blockchain
that not work because delegates are present?
and how can I make a blockscan on windows?
you can disable producing blocks, then rescan
来自我的 GT-N7100 上的 Tapatalk
Can I disable producing blocks for all delegates with one command ?
If no it would be great to implement something like this: "wallet_delegate_set_block_production all false"
-
I'm not sure, but you can change "all" to "ALL", and try again.
来自我的 GT-N7100 上的 Tapatalk
-
I'm not sure, but you can change "all" to "ALL", and try again.
来自我的 GT-N7100 上的 Tapatalk
Yep that was it ;)
-
I have received 1 BTSX from a sender: :o
BTSX5p7KnYKkzuTbCibjmPvf5e5cTgt54DweNVXgDgJHmafgsN7Dpn
how is it possible that I see the address and not the account or contact name ???
-
if the account did't register, it just show the address
-
if the account did't register, it just show the address
thanks!
-
It would be better instead of informing on Block Explorer:
Missing Block
it is better to say
Skipping Block
So new users want see that as a negative or a problem with the network etc. !
Even me when I see that I am on panic!
-
It would be better instead of informing on Block Explorer:
Missing Block
it is better to say
Skipping Block
So new users want see that as a negative or a problem with the network etc. !
Even me when I see that I am on panic!
But it is negative and a problem with the network...
-
It would be better instead of informing on Block Explorer:
Missing Block
it is better to say
Skipping Block
So new users want see that as a negative or a problem with the network etc. !
Even me when I see that I am on panic!
But it is negative and a problem with the network...
I don't say to promote it as a positive... (why not? :P)
you don't lie saying
skipping block
why to scare the people?
after all it is only for information,
the average user can't do nothing about it...
I don't say to hide the information just not to promote negative impressions about bitshares network...
It has to do with psychology. I want our users happy ;)
-
why to scare the people?
after all it is only for information,
the average user can't do nothing about it...
The idea is that they will remove their votes if they see that delegate missing blocks.
-
The wallet will not open for me on Windows....it crashes every single time
-
After making a backup from the gui menu "export wallet"
no measage appear that it was succesfull created...
You must check it manual going to the directory you saved the json file...
-
I deleted chain folder. After resync the chain, my account's balance is still zero.
My account is networker. I send all of my bts to another account yuanbao
BTS disappear after I run wallet_clear_pending_transactions command when I found transaction in pending state.
Can anyone help me? I lost over 200000 BTS
-
I deleted chain folder. After resync the chain, my account's balance is still zero.
My account is networker. I send all of my bts to another account yuanbao
BTS disappear after I run wallet_clear_pending_transactions command when I found transaction in pending state.
Can anyone help me? I lost over 200000 BTS
solved
https://bitsharestalk.org/index.php?topic=5767.msg78479#msg78479 (https://bitsharestalk.org/index.php?topic=5767.msg78479#msg78479)
-
when mouse over the up-vote hand on "Directory">"Delegates"
it sais "Click to unvote" when it should say "Click to vote up" and
it sais "Click to vote up" when it should say "Click to unvote"
please fix !
-
RPC Server Error: In method 'wallet_list_accounts': Assert Exception (10)
When I use wallet_import_keyhotee several times,Then
Accounts isn't displayed.
-
The wallet will not open for me on Windows....it crashes every single time
\
what is the error?
-
The wallet will not open for me on Windows....it crashes every single time
\
what is the error?
See my post history. I'm sure it's the same problem I've had.
-
The wallet will not open for me on Windows....it crashes every single time
\
what is the error?
See my post history. I'm sure it's the same problem I've had.
ok im getting the same error.
scrolling back it looks like others are getting farther they we are...however maybe they are linux thru wine? perhaps?
-
I use wine and 0.2.1 and I deleted the folders of 0.2.0 and installed 0.2.1 fresh. works. Only thing is the flickering log in box window. But I don't care because I am happy it works with wine, which is a big luck.
-
The wallet will not open for me on Windows....it crashes every single time
\
what is the error?
See my post history. I'm sure it's the same problem I've had.
ok im getting the same error.
scrolling back it looks like others are getting farther they we are...however maybe they are linux thru wine? perhaps?
It works when I launch an Amazon EC2 instance, but it won't work at my home computer. Not going to pay $8 per day just for access to the wallet.
-
The wallet will not open for me on Windows....it crashes every single time
\
what is the error?
See my post history. I'm sure it's the same problem I've had.
ok im getting the same error.
scrolling back it looks like others are getting farther they we are...however maybe they are linux thru wine? perhaps?
It works when I launch an Amazon EC2 instance, but it won't work at my home computer. Not going to pay $8 per day just for access to the wallet.
Gregg what error are you getting on home computer and what version win?
-
The wallet will not open for me on Windows....it crashes every single time
\
what is the error?
See my post history. I'm sure it's the same problem I've had.
yes it is the same problem....have you been able to find a remedy?
-
The wallet will not open for me on Windows....it crashes every single time
\
what is the error?
See my post history. I'm sure it's the same problem I've had.
yes it is the same problem....have you been able to find a remedy?
i was told to hit continue 4-5 times and it will load....when i hit continue once it closes so it didn't work for me
-
The wallet will not open for me on Windows....it crashes every single time
\
what is the error?
See my post history. I'm sure it's the same problem I've had.
ok im getting the same error.
scrolling back it looks like others are getting farther they we are...however maybe they are linux thru wine? perhaps?
It works when I launch an Amazon EC2 instance, but it won't work at my home computer. Not going to pay $8 per day just for access to the wallet.
Gregg what error are you getting on home computer and what version win?
Windows 7 64 bit
This is the error:
(http://i.imgur.com/LMYj1IA.png)
-
The wallet will not open for me on Windows....it crashes every single time
\
what is the error?
See my post history. I'm sure it's the same problem I've had.
yes it is the same problem....have you been able to find a remedy?
Does not work for me.
-
The wallet will not open for me on Windows....it crashes every single time
\
what is the error?
See my post history. I'm sure it's the same problem I've had.
yes it is the same problem....have you been able to find a remedy?
Does not work for me.
Before i heard of BTS X I was trying to run BTS XT i believe and it gave the same exact error...so i thought it was just my machine.
-
Having problem with importing my multibit wallet or import key.Wallet import successfully yields 0 balance and did a wallet_rescan_blockchain again 0 balance.
-
Having problem with importing my multibit wallet or import key.Wallet import successfully yields 0 balance and did a wallet_rescan_blockchain again 0 balance.
Known issue, we have someone working on it. For now if you can use multi-bit to export your private keys to WIF format you can import them manually.
-
ok I'll try to use carefully my private key instead . thank you BM
-
The wallet will not open for me on Windows....it crashes every single time
\
what is the error?
See my post history. I'm sure it's the same problem I've had.
yes it is the same problem....have you been able to find a remedy?
Does not work for me.
I get the same issue on windows, the wallet software appears to install ok but when you run it, it shuts down almost instantly.
-
I tested on two completely different workstations that were windows based. Failed on both......Guess you have to be on an OS other than windows to actually use btsx.
-
The wallet will not open for me on Windows....it crashes every single time
\
what is the error?
See my post history. I'm sure it's the same problem I've had.
yes it is the same problem....have you been able to find a remedy?
Does not work for me.
I get the same issue on windows, the wallet software appears to install ok but when you run it, it shuts down almost instantly.
Mine was working fine all day but now it shuts down almost instantly as well. maybe they are working on some issues.
-
The wallet will not open for me on Windows....it crashes every single time
\
what is the error?
See my post history. I'm sure it's the same problem I've had.
yes it is the same problem....have you been able to find a remedy?
Does not work for me.
I get the same issue on windows, the wallet software appears to install ok but when you run it, it shuts down almost instantly.
Mine was working fine all day but now it shuts down almost instantly as well. maybe they are working on some issues.
GALT, are you using win7? or what version?
-
"You are idle " bug
I use Windows Server 2008, cannot quit "You are idle " window
(http://i.gyazo.com/49e3beec706550682f230f438b1e47df.gif)
-
I had the "idle" problem, and BM said it's a known issue. The reason is that you change the log out time to an extremely big value, right?
You can try to uninstall the wallet after backup your wallet, and then import the wallet.json. The timeout value can be changed in the wallet.json file.
-
after I upgraded BitSharesX to 0.2.1
I lost all my votes and I had to vote again all my favorite delegates.
Is it normal?
Very fustrating to vote on any upgrade!
-
I tested on two completely different workstations that were windows based. Failed on both......Guess you have to be on an OS other than windows to actually use btsx.
If you are just looking for a taste while they are working out the bugs on windows boxes, you can always install ubuntu inside of windows without changing disk partitions, or anything. From there its a pretty easy build of the BTSX gui.
-
I have registered 9 new delegates:
liondani-1
liondani-2
liondani-3
...
...
liondani-9
with pay rates from 1% to 9% to give the biggest rewards back to the community... BUT I am stuck!
the problem is I can not find them on the stand by delegate list!!! (only the old liondani-delegate-1 to 9)
Any thoughts?
Screenshots:
(http://3.bp.blogspot.com/-SWuOaf8ahEU/U8zlb8sKJOI/AAAAAAAADAg/q42DLUGqHAE/s1600/Screenshot+2014-07-21+12.52.21.png)
(http://3.bp.blogspot.com/-fcDAbd16i2w/U8zmvzqG0YI/AAAAAAAADAs/oIkKeAF-dx4/s1600/Screenshot+2014-07-21+12.53.14.png)
-
The wallet will not open for me on Windows....it crashes every single time
\
what is the error?
See my post history. I'm sure it's the same problem I've had.
yes it is the same problem....have you been able to find a remedy?
Does not work for me.
I get the same issue on windows, the wallet software appears to install ok but when you run it, it shuts down almost instantly.
Mine was working fine all day but now it shuts down almost instantly as well. maybe they are working on some issues.
GALT, are you using win7? or what version?
I am using win 7 64 bit but it's working now. :)
-
I just installed the wallet... shuts down instantly, no error message.
Also, I have to go to the control panel in order to uninstall. Clicking the uninstall icon in the start menu does nothing.
Edit: I'm using 64-bit Windows 7
-
I cant not import my wallet.
tried many times, and always says "invalid password".
I have checked my password is ok .
why?
-
I cant not import my wallet.
tried many times, and always says "invalid password".
I have checked my password is ok .
why?
had you changed your password at some time? If yes try your old password because that is the right for backups made before password change...
Do you tried to import from json or do you have the wallet directory backup?
I read somewhere that on this windows gui version the import from json method is problematic and it is suggested to keep the json file for the next version.... or import this file on a linux setup with a BTSX wallet present.... (Am I right? Is it related with this issue?)
PS do you checked your CAPS-LOCK key or was a different language active (like Chinesse) ?
-
I cant not import my wallet.
tried many times, and always says "invalid password".
I have checked my password is ok .
why?
had you changed your password at some time? If yes try your old password because that is the right for backups made before password change...
Do you tried to import from json or do you have the wallet directory backup?
I read somewhere that on this windows gui version the import from json method is problematic and it is suggested to keep the json file for the next version.... or import this file on a linux setup with a BTSX wallet present.... (Am I right? Is it related with this issue?)
Nope. I have not changed my password.
but , It always failed to import the wallet.
I am sure the password is right.
-
Do you checked your CAPS-LOCK key or is a different language active (like Chinesse) ?
-
I tested on two completely different workstations that were windows based. Failed on both......Guess you have to be on an OS other than windows to actually use btsx.
If you are just looking for a taste while they are working out the bugs on windows boxes, you can always install ubuntu inside of windows without changing disk partitions, or anything. From there its a pretty easy build of the BTSX gui.
The GUI runs acceptably well under WINE. At least it didn't run any worse than under Windows. Just download the .exe and install it. chmod +x Bitshares-X-0.2.1.exe (or whatever). Then ./Bitshares-x-0.2.1.exe (run the executable) and it installed. I did have problems installing an upgrade, but I think maybe if you reboot before attempting it won't happen.
-
I haven't tried it in wine. I've been building it directly in ubuntu.
-
@bytemaster @stan
plz check the pm or email , thanks.
:)
-
Comparing the downloads in the VPS and on my home computer, my home windows computer is blocking parts of the download.
In the AppData folder I am missing 3 of the files:
peers.leveldb
wallet.dat
node.config.json
Anyone know why my computer is blocking these and how to unblock them from being downloaded?
-
So I still can not get this to open....it installs fine but as soon as I try to open it...it crashes...will this be remedied?
-
So I still can not get this to open....it installs fine but as soon as I try to open it...it crashes...will this be remedied?
See if you are missing the wallet.dat and peers.leveldb files like I am. It's located in Users in the appdata folder then in roaming.
-
I am having same issue, just loads up then nothing happens on windows, i checked for wallet.dat and peers.leveldb and I dont have them either. I believe I downloaded the client from the .info site.
-
there are no wallet.dat or peers.leveldb files in the folder you recommended checking
-
This is the problem and I can't figure out the fix.
When I download on a windows VPS, it is totally fine.
Our computers are blocking it and I can't figure out why.
I have tried mozilla, IE and Chrome. Opened up my firewall and security and I still always get 3 out of the 6 files that should be in the roaming folder.
-
so it appears we have the same problem....it would be nice if this could be remedied or acknowledged at least
-
Comparing the downloads in the VPS and on my home computer, my home windows computer is blocking parts of the download.
In the AppData folder I am missing 3 of the files:
peers.leveldb
wallet.dat
node.config.json
Anyone know why my computer is blocking these and how to unblock them from being downloaded?
These files are generated by the client when it is running. To the best of my knowledge they are a list of known peers, your wallet file that is saved when you create a wallet, and a configuration file.
If you have never created a wallet you could delete your entire data directory, and it would simply be rebuilt when the program is run.
You are likely missing these files because the program is terminating before they can be written.
-
This is really kind of ridiculous that we can't open the Windows wallet....what's the deal here?
-
Here is the event log:
Faulting application name: BitSharesX.exe, version: 0.0.0.0, time stamp: 0x53caf836
Faulting module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521ea8e7
Exception code: 0xc0000005
Fault offset: 0x00093547
Faulting process id: 0x2524
Faulting application start time: 0x01cfa57592af35af
Faulting application path: C:\Program Files (x86)\BitSharesX\bin\BitSharesX.exe
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
Report Id: d2f103b7-1168-11e4-b313-00262d4da740
-
I don't have a windows 7 box to troubleshoot with, but a few things I might try.
1. Right click and run as administrator.
2. Turn off anti virus.
3. Create a new user account, and attempt to install/run it in that.
4. Boot into safe mode with networking and attempt to run it.
If any of these work for you please post here for the others.
-
The wallet will not open for me on Windows....it crashes every single time
\
what is the error?
See my post history. I'm sure it's the same problem I've had.
yes it is the same problem....have you been able to find a remedy?
Does not work for me.
I get the same issue on windows, the wallet software appears to install ok but when you run it, it shuts down almost instantly.
Mine was working fine all day but now it shuts down almost instantly as well. maybe they are working on some issues.
GALT, are you using win7? or what version?
I am facing the same problem.The wallet crashes instantly. I tried it on win8 64 bit and win7 64 bit as well but to no avail. Are their any prerequisites for installing the wallet?
-
The wallet will not open for me on Windows....it crashes every single time
\
what is the error?
See my post history. I'm sure it's the same problem I've had.
yes it is the same problem....have you been able to find a remedy?
Does not work for me.
I get the same issue on windows, the wallet software appears to install ok but when you run it, it shuts down almost instantly.
Mine was working fine all day but now it shuts down almost instantly as well. maybe they are working on some issues.
GALT, are you using win7? or what version?
I am facing the same problem.The wallet crashes instantly. I tried it on win8 64 bit and win7 64 bit as well but to no avail. Are their any prerequisites for installing the wallet?
-
The wallet will not open for me on Windows....it crashes every single time
\
what is the error?
See my post history. I'm sure it's the same problem I've had.
yes it is the same problem....have you been able to find a remedy?
Does not work for me.
I get the same issue on windows, the wallet software appears to install ok but when you run it, it shuts down almost instantly.
Mine was working fine all day but now it shuts down almost instantly as well. maybe they are working on some issues.
GALT, are you using win7? or what version?
I am facing the same problem.The wallet crashes instantly. I tried it on win8 64 bit and win7 64 bit as well but to no avail. Are their any prerequisites for installing the wallet?
+5% I would pimp the S*** out this wallet if I could open & use it.
Win 7 64 bit for me.
-
The wallet will not open for me on Windows....it crashes every single time
\
what is the error?
See my post history. I'm sure it's the same problem I've had.
yes it is the same problem....have you been able to find a remedy?
Does not work for me.
I get the same issue on windows, the wallet software appears to install ok but when you run it, it shuts down almost instantly.
Mine was working fine all day but now it shuts down almost instantly as well. maybe they are working on some issues.
GALT, are you using win7? or what version?
I am facing the same problem.The wallet crashes instantly. I tried it on win8 64 bit and win7 64 bit as well but to no avail. Are their any prerequisites for installing the wallet?
+5% I would pimp the S*** out this wallet if I could open & use it.
Win 7 64 bit for me.
If you have windows7 (32,64) Please make sure you uninstall any virtual or removable USB flash drives on your machine.
If you use flash drives Win7 keeps them installed when you remove the flash drive. Just uninstall them(it).
then run exe
-
+5% I would pimp the S*** out this wallet if I could open & use it.
Win 7 64 bit for me.
If you have windows7 (32,64) Please make sure you uninstall any virtual or removable USB flash drives on your machine.
If you use flash drives Win7 keeps them installed when you remove the flash drive. Just uninstall them(it).
then run exe
Thanks for the help raleit2014.
I don't think I have any USB flash drives installed. My keyboard is connected via wireless USB. Which I assume is fine.
Windows says the problem event name is 'BEX' & gives me some other info I can post if that helps.
-
I found a serious bug.
I closed bts wallet by using Task Manager ,
then I reopened it, everything is gone , no accounts, no transactions.
Please help me .. I have lots of BTSX in it...
-
I found a serious bug.
I closed bts wallet by using Task Manager ,
then I reopened it, everything is gone , no accounts, no transactions.
Please help me .. I have lots of BTSX in it...
Have you registered your account and have a copy/backup of you wallet?
reboot and try again .. maybe windows did not correctly kill it ..
afaik wallets are stored in a robust database
-
The wallet will not open for me on Windows....it crashes every single time
\
what is the error?
See my post history. I'm sure it's the same problem I've had.
yes it is the same problem....have you been able to find a remedy?
Does not work for me.
I get the same issue on windows, the wallet software appears to install ok but when you run it, it shuts down almost instantly.
Mine was working fine all day but now it shuts down almost instantly as well. maybe they are working on some issues.
GALT, are you using win7? or what version?
I am facing the same problem.The wallet crashes instantly. I tried it on win8 64 bit and win7 64 bit as well but to no avail. Are their any prerequisites for installing the wallet?
+5% I would pimp the S*** out this wallet if I could open & use it.
Win 7 64 bit for me.
If you have windows7 (32,64) Please make sure you uninstall any virtual or removable USB flash drives on your machine.
If you use flash drives Win7 keeps them installed when you remove the flash drive. Just uninstall them(it).
then run exe
Great tip! Thanks for that. I had Daemon Tools on my machine which created two virtual drives; after deleting them BTSX loaded up on my machine.
Now, can somebody tell me how I can import a backup of my wallet onto a different machine running the BTSX software? The Import Wallet function is grayed out for me.
Thanks in advance.
-
I'm not sure if this is a solution to some of the problems being addressed in this thread, but earlier I couldn't open the windows client because of an empty disk drive. I would get the error "There is no disk in the drive. Please insert a disk into drive F:." This error would prevent me from opening the BitShareX program. I believe someone else was having the problem before and I found the solution today although I am not sure if it was solved elsewhere on the forum. You have to right click on the start button and then left click "Computer Management". Once under Computer Management click "Disk Management" under the Storage category. Find the disk that is giving the program trouble, right click it and select "Properties". Once under Properties click Driver and then Disable. Now the client should be able to open normal. Hopefully this helps someone.
-
The wallet will not open for me on Windows....it crashes every single time
\
what is the error?
See my post history. I'm sure it's the same problem I've had.
yes it is the same problem....have you been able to find a remedy?
Does not work for me.
I get the same issue on windows, the wallet software appears to install ok but when you run it, it shuts down almost instantly.
Mine was working fine all day but now it shuts down almost instantly as well. maybe they are working on some issues.
GALT, are you using win7? or what version?
I am facing the same problem.The wallet crashes instantly. I tried it on win8 64 bit and win7 64 bit as well but to no avail. Are their any prerequisites for installing the wallet?
+5% I would pimp the S*** out this wallet if I could open & use it.
Win 7 64 bit for me.
If you have windows7 (32,64) Please make sure you uninstall any virtual or removable USB flash drives on your machine.
If you use flash drives Win7 keeps them installed when you remove the flash drive. Just uninstall them(it).
then run exe
Great tip! Thanks for that. I had Daemon Tools on my machine which created two virtual drives; after deleting them BTSX loaded up on my machine.
Now, can somebody tell me how I can import a backup of my wallet onto a different machine running the BTSX software? The Import Wallet function is grayed out for me.
Thanks in advance.
Go to the console and type wallet_create_from_json <json_filename> <wallet_name> <imported_wallet_passphrase>
>> help wallet_create_from_json
Usage:
wallet_create_from_json <json_filename> <wallet_name> <imported_wallet_passphrase> Creates a new wallet from an exported JSON file
Creates a new wallet from an exported JSON file
Parameters:
json_filename (filename, required): the full path and filename of JSON wallet to import
wallet_name (wallet_name, required): name of the wallet to create
imported_wallet_passphrase (passphrase, required): passphrase of the imported wallet
Returns:
void
-
this may sound stupid: I have been all over the wallet, but i cannot find the deposit address for receiving BTSX funds.
can someone please advise?
-
this may sound stupid: I have been all over the wallet, but i cannot find the deposit address for receiving BTSX funds.
can someone please advise?
Go to accounts.
Select your account.
Select the advanced tab.
Your key will begin with BTSX
Alternately you can go to the console page and type
wallet_list_my_accounts
-
I found a serious bug.
I closed bts wallet by using Task Manager ,
then I reopened it, everything is gone , no accounts, no transactions.
Please help me .. I have lots of BTSX in it...
Have you registered your account and have a copy/backup of you wallet?
reboot and try again .. maybe windows did not correctly kill it ..
afaik wallets are stored in a robust database
I didn't backup wallet.
Still nothing after reboot, Is it possible to recover the wallet?
-
I found a serious bug.
I closed bts wallet by using Task Manager ,
then I reopened it, everything is gone , no accounts, no transactions.
Please help me .. I have lots of BTSX in it...
Have you registered your account and have a copy/backup of you wallet?
reboot and try again .. maybe windows did not correctly kill it ..
afaik wallets are stored in a robust database
I didn't backup wallet.
Still nothing after reboot, Is it possible to recover the wallet?
1) When you re-open your wallet can you login with your original password?
2) Check for a folder in your APP_DATA directory BitShares X/wallets/default
3) Always backup.
-
I found a serious bug.
I closed bts wallet by using Task Manager ,
then I reopened it, everything is gone , no accounts, no transactions.
Please help me .. I have lots of BTSX in it...
Have you registered your account and have a copy/backup of you wallet?
reboot and try again .. maybe windows did not correctly kill it ..
afaik wallets are stored in a robust database
I didn't backup wallet.
Still nothing after reboot, Is it possible to recover the wallet?
1) When you re-open your wallet can you login with your original password?
2) Check for a folder in your APP_DATA directory BitShares X/wallets/default
3) Always backup.
Yes, I can login with my password, but no accounts, transactions.
checked APP_DATA , it has two directories (default and my account name)
I didn't export wallet , because I thought BTSX also has a wallet.dat file like bitcoin...
-
I found a serious bug.
I closed bts wallet by using Task Manager ,
then I reopened it, everything is gone , no accounts, no transactions.
Please help me .. I have lots of BTSX in it...
Have you registered your account and have a copy/backup of you wallet?
reboot and try again .. maybe windows did not correctly kill it ..
afaik wallets are stored in a robust database
I didn't backup wallet.
Still nothing after reboot, Is it possible to recover the wallet?
1) When you re-open your wallet can you login with your original password?
2) Check for a folder in your APP_DATA directory BitShares X/wallets/default
3) Always backup.
Yes, I can login with my password, but no accounts, transactions.
checked APP_DATA , it has two directories (default and my account name)
I didn't export wallet , because I thought BTSX also has a wallet.dat file like bitcoin...
Ok. I think you will be fine, we just need to try a few things.
1. Close wallet.
2. Backup wallets directory
3. Rename default to old default
4. Rename youraccontname to default
5. Start wallet.
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
-
The wallet will not open for me on Windows....it crashes every single time
\
what is the error?
See my post history. I'm sure it's the same problem I've had.
yes it is the same problem....have you been able to find a remedy?
Does not work for me.
I get the same issue on windows, the wallet software appears to install ok but when you run it, it shuts down almost instantly.
Mine was working fine all day but now it shuts down almost instantly as well. maybe they are working on some issues.
GALT, are you using win7? or what version?
I am facing the same problem.The wallet crashes instantly. I tried it on win8 64 bit and win7 64 bit as well but to no avail. Are their any prerequisites for installing the wallet?
+5% I would pimp the S*** out this wallet if I could open & use it.
Win 7 64 bit for me.
If you have windows7 (32,64) Please make sure you uninstall any virtual or removable USB flash drives on your machine.
If you use flash drives Win7 keeps them installed when you remove the flash drive. Just uninstall them(it).
then run exe
Great tip! Thanks for that. I had Daemon Tools on my machine which created two virtual drives; after deleting them BTSX loaded up on my machine.
Now, can somebody tell me how I can import a backup of my wallet onto a different machine running the BTSX software? The Import Wallet function is grayed out for me.
Thanks in advance.
Go to the console and type wallet_create_from_json <json_filename> <wallet_name> <imported_wallet_passphrase>
>> help wallet_create_from_json
Usage:
wallet_create_from_json <json_filename> <wallet_name> <imported_wallet_passphrase> Creates a new wallet from an exported JSON file
Creates a new wallet from an exported JSON file
Parameters:
json_filename (filename, required): the full path and filename of JSON wallet to import
wallet_name (wallet_name, required): name of the wallet to create
imported_wallet_passphrase (passphrase, required): passphrase of the imported wallet
Returns:
void
That worked perfectly...thanks so much!
-
I found a serious bug.
I closed bts wallet by using Task Manager ,
then I reopened it, everything is gone , no accounts, no transactions.
Please help me .. I have lots of BTSX in it...
Have you registered your account and have a copy/backup of you wallet?
reboot and try again .. maybe windows did not correctly kill it ..
afaik wallets are stored in a robust database
I didn't backup wallet.
Still nothing after reboot, Is it possible to recover the wallet?
1) When you re-open your wallet can you login with your original password?
2) Check for a folder in your APP_DATA directory BitShares X/wallets/default
3) Always backup.
Yes, I can login with my password, but no accounts, transactions.
checked APP_DATA , it has two directories (default and my account name)
I didn't export wallet , because I thought BTSX also has a wallet.dat file like bitcoin...
Ok. I think you will be fine, we just need to try a few things.
1. Close wallet.
2. Backup wallets directory
3. Rename default to old default
4. Rename youraccontname to default
5. Start wallet.
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
Recovered wallet.. Thank you very much.
another bug:
Blocks are synced, No network problem, upgraded to v 0.23 wallet. But the transactions are still pending after two days...
-
I tried to register my account name but I get the following error message..
RPC Server Error: in method "wallet_account_register" : unknown account(20006)
I use the windows client, any ideas on what I may be doing wrong? I have 0.1 btsx and I choose to pay from the same account I want to register
-
I tried to register my account name but I get the following error message..
RPC Server Error: in method "wallet_account_register" : unknown account(20006)
I use the windows client, any ideas on what I may be doing wrong? I have 0.1 btsx and I choose to pay from the same account I want to register
I am getting that error too but in my case it seems to be only for accounts that I created with .com endings. It let me create accounts with .com in them but doesn't let me register them. I get that error.
-
Used the wallet for the first time ever and i had a blast!! Everything is blazing fast and smooth. So much better experience than Bitcoin Core or NXT Wallet. Great job guys!!! :)
How about posting that same message over at bitcointalk? https://bitcointalk.org/index.php?topic=679185.80
-
I tried to register my account name but I get the following error message..
RPC Server Error: in method "wallet_account_register" : unknown account(20006)
I use the windows client, any ideas on what I may be doing wrong? I have 0.1 btsx and I choose to pay from the same account I want to register
I am getting that error too but in my case it seems to be only for accounts that I created with .com endings. It let me create accounts with .com in them but doesn't let me register them. I get that error.
You were right, problem was that I was trying to register a .something name, I tried "chryspano" and it registered fine.
-
I tried to register my account name but I get the following error message..
RPC Server Error: in method "wallet_account_register" : unknown account(20006)
I use the windows client, any ideas on what I may be doing wrong? I have 0.1 btsx and I choose to pay from the same account I want to register
I am getting that error too but in my case it seems to be only for accounts that I created with .com endings. It let me create accounts with .com in them but doesn't let me register them. I get that error.
You were right, problem was that I was trying to register a .something name, I tried "chryspano" and it registered fine.
Bytemaster: Is this a confirmed bug?
-
On the new version 0.2.3 when I transfer funds and I write the recipient name it doesn't filter the name anymore, it drops a list with all registered names!
So i can not pick up a name suggestion dependen on the letters I typed and I must write all the account name !!!
-
On the new version 0.2.3 when I transfer funds and I write the recipient name it doesn't filter the name anymore, it drops a list with all registered names!
So i can not pick up a name suggestion dependen on the letters I typed and I must write all the account name !!!
I have seen that as well.
-
(http://ww1.sinaimg.cn/mw1024/3e3f95e7gw1eiweonsb6xj20gu0580t2.jpg)
-
Windows users, please try 0.3.0 (https://bitsharestalk.org/index.php?topic=6468.msg86051#msg86051) and let us know if the crashing problems are still present.
-
Will windows BitSharesX client ever support multiple wallets? :-X
-
Will windows BitSharesX client ever support multiple wallets? :-X
+5 for multiple wallets
-
not one version crashed on my system
win 7 64 bit - now 0.3.0 installed
-
1.when mouseover a link the mouse "pointer" dont get to a "hand".
I think it was better before.
2.when clicking "Transfer" and the the drop down menu on "from" only your 15 first accounts show-up, so you cant choose for example your 20th account from here.
It would be great if on the list don't appera zero balance accounts since you can't transfer funds from them anyway....
-
1.when mouseover a link the mouse "pointer" dont get to a "hand".
I think it was better before.
2.when clicking "Transfer" and the the drop down menu on "from" only your 15 first accounts show-up, so you cant choose for example your 20th account from here.
It would be great if on the list don't appera zero balance accounts since you can't transfer funds from them anyway....
liondani, thanks for your feedback.
#1 This makes the application to look and feel as "native" one, not a web app. All the clickable elements are still easy to distinguish from not clickable.
#2 The drop down is fixed in this commit https://github.com/BitShares/web_wallet/commit/96b007b40948abcad3c2ca94d53dfee09c6549a5 so expect to see it fixed in next release.
Good idea to exclude zero balance accounts.
-
1).when updating the "Priority Fee(BTSX)" lower than 0.1 BTSX then it doesn't make succesfull transfers and an error message appears after the transfer attempt about "insuficent priority fee"!
2).When updating the "Priority Fee(BTSX)" to higher values compared with 0.1 BTSX the transfer works BUT on confirmation window that appear it stills informs FALSE that the priority fee would be 0.1 BTSX instead the real value!
3). I think it is a little bit dangerous to let the user free to set whatever fee they want on the same page with the "log out time" preference. Assume they type on the "priority fee" something like 9999999 because they thought he typed on the "log out timeout" field.... And after that he makes a transaction where the confirmation window mention the wrong 0.1 BTSX fee.... :P (what a disaster!)
-
Probability of missing block is too high now, 3i should improve this. I think the Probability of missing block should be lower than 1/1000000. Or missing less than one block for 50 years will be better for application in industries.
-
you realize the current software version is 0.3.2? The prob. of missing a block was drastically decreased by the most recent version
-
1).when updating the "Priority Fee(BTSX)" lower than 0.1 BTSX then it doesn't make succesfull transfers and an error message appears after the transfer attempt about "insuficent priority fee"!
2).When updating the "Priority Fee(BTSX)" to higher values compared with 0.1 BTSX the transfer works BUT on confirmation window that appear it stills informs FALSE that the priority fee would be 0.1 BTSX instead the real value!
3). I think it is a little bit dangerous to let the user free to set whatever fee they want on the same page with the "log out time" preference. Assume they type on the "priority fee" something like 9999999 because they thought he typed on the "log out timeout" field.... And after that he makes a transaction where the confirmation window mention the wrong 0.1 BTSX fee.... :P (what a disaster!)
+5% +5%
This was a problem for me too.
-
(http://ww1.sinaimg.cn/mw1024/3e3f95e7gw1eiweonsb6xj20gu0580t2.jpg)
0.3.0 failed
-
what about to implement on delegates page up @ down arrows before the delegate names so we know which was the last position they had in past?
something like this:
(http://fishbowl.pastiche.org/archives/pictures/top-20-theme-songs.png)
(http://blog.world-mysteries.com/wp-content/uploads/2011/12/billionaires2011_top10_list.jpg)
-
>> blockchain_get_block_count
148576
I am stucked on block 14576 on windows gui 0.3.0 the last 8h 31m with 10 connections!!!
1.Restarted the client
2.added a few nodes
3.rescanned blockchain
4.restarted windows
5.synced windows time first attempt with with "time.nist.gov" and second attempt "time.windows.com"
no luck... :(
-
>> blockchain_get_block_count
148576
I am stuck on block 14576 on windows gui 0.3.0 the last 8h 31m with 10 connections!!!
1.Restarted the client
2.added a few nodes
3.rescanned blockchain
4.restarted windows
5.synced windows time first attempt with with "time.nist.gov" and second attempt "time.windows.com"
no luck... :(
solved after I deleted folder "chain" and waited to sync from the beginning...
-
When delegate block production is enabled any transaction sent appear as pending in the wallet (yet still goes through), and transactions sent to delegates or non delegate accounts in wallet don't show up at all.
If I disable block production for all delegates and rescan block chain everything goes back to normal.
Is delegate block production not yet supported on windows?
-
Not sure someone reported or not:
I am using Windows 8.1 (64 bit) and wallet 0.3.0. I cannot quit the wallet normally, anytime I quit the wallet (file/Quit) the wallet always freezes and stops working.
When exporting to json, if I overwrite an existed json file, wallet also freezes and stops working.
-
When delegate block production is enabled any transaction sent appear as pending in the wallet (yet still goes through), and transactions sent to delegates or non delegate accounts in wallet don't show up at all.
If I disable block production for all delegates and rescan block chain everything goes back to normal.
Is delegate block production not yet supported on windows?
Delegates are not supposed to send transactions because of performance requirements of titan ..
If blockproduction is enabled your client just does not scan transactions .. currently desired restriction .. devs are working on multithreading
-
When delegate block production is enabled any transaction sent appear as pending in the wallet (yet still goes through), and transactions sent to delegates or non delegate accounts in wallet don't show up at all.
If I disable block production for all delegates and rescan block chain everything goes back to normal.
Is delegate block production not yet supported on windows?
Block production is not supported in the GUI and probably never will be.
-
Thanks.
If there are no plans to support block production in the gui why do you give the user an option to register as a delegate in the GUI?
Is there another benefit to registering as a delegate other than block production potential?
-
How do I change the password? Option is greyed out.
-
Thanks.
If there are no plans to support block production in the gui why do you give the user an option to register as a delegate in the GUI?
Is there another benefit to registering as a delegate other than block production potential?
registering as delegate is something different from running a delegate with active block production ..
Further, delegates should be tech savvy enought to run the terminal version and also should be able to register a delegate on the console.
BTW, it's not too difficulr .. just give it try (but be reminded that registering a delegates costs a fee)