BitShares Forum
Main => Technical Support => Topic started by: Ermes on November 12, 2015, 07:16:15 pm
-
Hi,
I'm importing keys from BitShares 0.9.3c
One of the keys does not have full funding. Keeping 7 of 8.
What is the problem?
-
I want to claim the funds.
I see http://docs.bitshares.eu/migration/howto-importing-wallet.html
1. I have to write >>> Import_balance <my_account_name> ["*"] right?
2. Here it is written ["*"]?
3. Where do I have to write it in the Consloa of BitShares 0.9.3c?
-
Hi,
I'm importing keys from BitShares 0.9.3c
One of the keys does not have full funding. Keeping 7 of 8.
What is the problem?
Don't get what you are talking about .. :(
I want to claim the funds.
I see http://docs.bitshares.eu/migration/howto-importing-wallet.html
1. I have to write >>> Import_balance <my_account_name> ["*"] right?
2. Here it is written ["*"]?
3. Where do I have to write it in the Consloa of BitShares 0.9.3c?
Please read through the whole migration guide carefully. I tried to make clear
which commands are supposed to be put into BitShares 0.9.3 and which are
supposed to be put in the cli_wallet of BitShares 2.
Please explain CLEARLY what you want to achieve and what you have already tried.
From what you explained above, I can't figure out how to help you.
-
It is understood.
I want to migrate from BitShares 0.9.3c OpenLedger
I open BitShares 0.9.3c. I have not all my funds.
I'll> _Console. I write wallet_export_keys C: \ bts \ mykeys.json
I open https://bitshares.openledger.info/
1. Wallet Management Consolo
2. Import keys. I have not all my funds. In the name it appears. Keeping 7 of 8.
I stand at this point.
-
It is understood.
I want to migrate from BitShares 0.9.3c OpenLedger
I open BitShares 0.9.3c. I have not all my funds.
I'll> _Console. I write wallet_export_keys C: \ bts \ mykeys.json
I open https://bitshares.openledger.info/
1. Wallet Management Consolo
2. Import keys. I have not all my funds. In the name it appears. Keeping 7 of 8.
I stand at this point.
If you don't see all your funds in BitShares 0.9.3 then you need to first sync the whole 0.9.3 blockchain to find all your funds.
Only when you see all your funds, it makes sense to export your keys for BitShares 2.0!
See the migration guide: http://docs.bitshares.eu/migration
-
I'm reading the guide.
I get to this point. http://docs.bitshares.eu/migration/howto-importing-wallet.html#claiming-balances
I do not know what to do.
Do I have to write in BitShares 0.9.3c?
> _Consola
Import_balance <my_account_name>
???
-
That command is for the Bitshares 2.0 cli wallet. You should try with the Web wallet first!
Have you got all the funds in bitshares 0.9.3c?
-
No.
-
No.
Is your bitshares 0.9.3c client fully synced?
-
No.
-
No.
Can you open your 0.9.3c client, go to the upper right corner, click on your account name --> Advanced and then on "Console".
Once you are there, type "info" and tell me the number you see in the first line, next to "blockchain head block num".
-
>> get_info
{
"blockchain_head_block_num": 1196222,
"blockchain_head_block_age": "49 weeks old",
-
>> get_info
{
"blockchain_head_block_num": 1196222,
"blockchain_head_block_age": "49 weeks old",
Please, download the full blockchain here.
Tell me when you finish.
https://mega.nz/#!P8BhCZ4I!NZHkhUEbrgVTNRI1QXhDJI6ly7z1Fv2nFgrpQM1UWDQ
-
Now I download
MEGAsyncSetup.exe
-
Now I download
MEGAsyncSetup.exe
You should be able to download directly with your browser without MEGA Sync...
-
BitShare 2015-10-14.7z.
This already downloaded to the browser.
-
BitShare 2015-10-14.7z.
This already downloaded to the browser.
Extract that file. You should find a folder named "chain".
Now go to C:\Users\*your_username*\AppData\Roaming\BitShares
Here you will find another chain folder, rename it as "chain-old"
Copy the downloaded and extracted chain folder and paste it here
Start the 0.9.3c bitshares client
At this point, if you still don't have all the fund, go to the console and type "rescan".
This could take a long time, just wait and be patient, you can check the scan progress in the bottom left corner.
Once the scan is completed, you should have all the funds.
Let me know
-
BitShare 2015-10-14.7z.
This already downloaded to the browser.
Extract that file. You should find a folder named "chain".
Now go to C:\Users\*your_username*\AppData\Roaming\BitShares
Here you will find another chain folder, rename it as "chain-old"
Copy the downloaded and extracted chain folder and paste it here
Start the 0.9.3c bitshares client
At this point, if you still don't have all the fund, go to the console and type "rescan".
This could take a long time, just wait and be patient, you can check the scan progress in the bottom left corner.
Once the scan is completed, you should have all the funds.
Let me know
I am in the exact same boat as him. I downloaded the blockchain and then the command -> scan
once that was completed...still funds missing
then I did -> wallet_regenerate_keys ACCOUNT-NAME 10500
...finished this morning: still funds missing
then for 1 last try this morning: wallet_regenerate_keys ACCOUNT-NAME 35000
hope I am going to get my funds out of that one.
Am I missing something?
-
I am in the exact same boat as him. I downloaded the blockchain and then the command -> scan
once that was completed...still funds missing
then I did -> wallet_regenerate_keys ACCOUNT-NAME 10500
...finished this morning: still funds missing
then for 1 last try this morning: wallet_regenerate_keys ACCOUNT-NAME 35000
hope I am going to get my funds out of that one.
Am I missing something?
As far as I know, that should works.
Let us know if it doesn't work after the key regeneration.
-
Do you see transactions with "unkown" as recepient?
Have you checked your balance with "balance" (the transactions history "balance" tends to be incorrect)
-
Do you see transactions with "unkown" as recepient?
Have you checked your balance with "balance" (the transactions history "balance" tends to be incorrect)
Yes, I have plenty with "Unknown" as recipient. So I have to type "balance" in the console.
Also, how do I define the value in wallet_regenerate_keys ACCOUNT-NAME VALUE ?
10500? 30000?
Don't want to end up having to do this with a third time.
(Thanks for the help, it will be a good use of ShareBits once I can finally recover my funds! )
-
Usually, the VALUE for regeneration of keys can only help for MARKET TRADING transactions. If you have traded a lot, you need to have a rather high number.
If you only traded a little, smaller numbers should be sufficient.
Its still a pain in the ass.
Here is an alternative approach that would scan each transaction individually
wallet_scan_transaction <txid>
wallet_scan_transaction_experimental <txid>
wallet_verify_titan_deposit <txid>
Not sure if any of those work for market transactions .. but please try them on any of your UNKNOWN transactions and see if it helps.
-
Usually, the VALUE for regeneration of keys can only help for MARKET TRADING transactions. If you have traded a lot, you need to have a rather high number.
If you only traded a little, smaller numbers should be sufficient.
Its still a pain in the ass.
Here is an alternative approach that would scan each transaction individually
wallet_scan_transaction <txid>
wallet_scan_transaction_experimental <txid>
wallet_verify_titan_deposit <txid>
Not sure if any of those work for market transactions .. but please try them on any of your UNKNOWN transactions and see if it helps.
Thank you xeroc, if I get my funds back, you'll receive a generous tip! ;-)
what is txid? (transaction id) that I must do 1 by 1?
-
txid is the transaction id that you either see in your over view (some 8 character thing) .. or via "history" in the console ..
-
The scan is completed.
I have all the funds.
What is the next step?
-
The scan is completed.
I have all the funds.
What is the next step?
First: http://docs.bitshares.eu/migration/howto-exporting-wallet.html#using-the-console
Second: http://docs.bitshares.eu/migration/howto-importing-wallet.html#web-wallet
-
I'm here. http://docs.bitshares.eu/migration/howto-importing-wallet.html#web-wallet
I see.
Wallet Management Console
Import Keys.
Found 14 private keys (reset)
Account of keys
(Name) Keeping 10 of 11
Unclaimed balances belonging to these keys
Asset totals
xxxxxxx BTS
Import cancel
I give to import. I see in the upper left corner.
This wallet has Already Been Imported.
As I can recover those funds?
-
I'm here. http://docs.bitshares.eu/migration/howto-importing-wallet.html#web-wallet
I see.
Wallet Management Console
Import Keys.
Found 14 private keys (reset)
Account of keys
(Name) Keeping 10 of 11
Unclaimed balances belonging to these keys
Asset totals
xxxxxxx BTS
Import cancel
I give to import. I see in the upper left corner.
This wallet has Already Been Imported.
As I can recover those funds?
Try the "Balance Claim - Lookup Balances" in the web wallet settings
-
I see.
No balance claims.
-
I see.
No balance claims.
Create a new wallet, import the keys and claim balance again
-
All funds recovered.
Problem solved.
Thank you.
-
All funds recovered.
Problem solved.
Thank you.
You welcome
-
Hey @xeroc , I finally got the right balance to showup in my 0.9.3c client.
But when I go to openledger to import my keys and claim my balance, it says that I have already imported those keys and don't allow me to claim my balance.
Am I in a pickle?
-
Hey @xeroc , I finally got the right balance to showup in my 0.9.3c client.
But when I go to openledger to import my keys and claim my balance, it says that I have already imported those keys and don't allow me to claim my balance.
Am I in a pickle?
Create a new wallet, import the keys and claim the balance again.
How did you resolve your problem?
-
Hey @xeroc , I finally got the right balance to showup in my 0.9.3c client.
But when I go to openledger to import my keys and claim my balance, it says that I have already imported those keys and don't allow me to claim my balance.
Am I in a pickle?
Create a new wallet, import the keys and claim the balance again.
How did you resolve your problem?
yep that worked. I opened a new account via Firefox and IT FINALLY WORKED! OMG, it literally took a month.
-
I meant how did you resolve your problem with the unknown transaction, since rescan didn't work for you.
Anyway, just to let you know, you can have more than one wallet in the same browser, just going in the settings and create a new wallet there.
Better late than never xD
Enjoy your bitshares!
-
I meant how did you resolve your problem with the unknown transaction, since rescan didn't work for you.
Anyway, just to let you know, you can have more than one wallet in the same browser, just going in the settings and create a new wallet there.
Better late than never xD
Enjoy your bitshares!
Thanks!
After the "rescan 1", I did "wallet_regenerate_keys ACCOUNT-NAME 30000"
-
Note to my self: Read the forum *before* answering PMs :P
Good to see all your stuff is back!!
Have fun using the wallet :D
-
hi
finally imported and claimed my balance on web wallet but l have one more thing to finalize,what s this bin file when we back up web wallet? it just vlc file and l don t really how to import this if l need to.
thanks
-
hi
finally imported and claimed my balance on web wallet but l have one more thing to finalize,what s this bin file when we back up web wallet? it just vlc file and l don t really how to import this if l need to.
thanks
The bin file is the backup of the Web wallet.
Put it in a safe place and have more than just one copy.
And make a backup of the brain key as well.
Happy to hear you finally managed the migration.
Edit: you have to use the "Restore Backup" functionality to import a bitshares-2 backup.