wmvatis, see my previous post on this thread with the fix for AMDOverdriveCtrl:
https://bitsharestalk.org/index.php?topic=1784.msg21279#msg21279
https://bitsharestalk.org/index.php?topic=1784.msg21279#msg21279
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Show posts MenuQuote from: Trokhon on January 01, 2014, 07:13:34 PMQuote from: Trokhon on January 01, 2014, 03:26:07 PMQuote from: reorder on January 01, 2014, 03:21:20 PMmy problem is I getQuote from: h0g0f0g0 on January 01, 2014, 03:20:12 PMIn Windows world they have all those fancy GUIs ;)
Check the temperature with:aticonfig --adapter=0 --od-gettemperature
and fan speed withaticonfig --pplib-cmd "get fanspeed 0"
If the temperature is too high, try setting the fan speed like this:aticonfig --pplib-cmd "set fanspeed 0 80"
PPLIB command execution has failed!
ati_pplib_cmd: execute "get" failed!
and with cgminer i have no problem with these cards runing at 70% fan speed with 76 degree
thanks for all your help!!
Since aticonfig doesnt allow me to control the fan at the 290 cards, I use now following solution to protect against the temperature run to 94 degree.
I first start cgminer and when card reaches arround 76 degree and 60-70% fan rotation I quickly switch to memory coin miner and the fan stays at that rotation speed.
It seems to me the auto speed of the cards is set way too low around 43 % fan rotation.
Quote from: reorder on January 01, 2014, 03:19:40 PMQuote from: Trokhon on January 01, 2014, 03:17:54 PMFigure you have to check its fans and thermal grease.. 94 is not healthy at all.Quote from: reorder on January 01, 2014, 03:13:37 PMyes you are right on my saphire its 67 but on ASUS card its 94 which is very sadQuote from: Trokhon on January 01, 2014, 03:09:21 PMSome people have reported a much cooler operation than with scrypt, and a lower power consumption.Quote from: reorder on January 01, 2014, 02:59:22 PMQuote from: Trokhon on January 01, 2014, 02:54:13 PMPerhaps, in future versions. Driver's autotune might work just as well in most cases: card's cores are not always loaded to 100%, during periods when most time is spent accessing memory, cores have a chance to cool down.
could you add an option to control the vents rotation on card
thanks in advance
thanks a lot I fear only that 94 degree ist too hot for my 290
Page created in 0.118 seconds with 12 queries.