Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - warmach

Pages: 1 [2]
16
Technical Support / Asset Descriptions
« on: April 16, 2016, 02:21:02 am »
Why is it that if an asset has a "Short Name" set, that the full description is not displayed at all in asset details?  But if there is no "Short Name" then the full description is displayed.  I would think the asset detail page would show everything.  I don't want to have to sped 293 BTS to update an asset just to remove the Short Name thereby allowing the full description to be displayed.

Can we get the UI updated so that the asset details lists everything?

17
General Discussion / Re: Project: Raspberry Pi (and other ARM SBC) BitShares2.0 images and repositories
« on: April 04, 2016, 08:23:27 pm »
Quote from: yjzll on October 24, 2015, 08:54:09 am
pi@raspberrypi:~$ witness_node
2903143ms th_a       witness.cpp:70                plugin_initialize    ] key_id_to_wif_pair: ["GPH6MRyAjQq8ud7hVNYcfnVPJqcVpscN5So8BhtHuGYqET5GDW5CV","5KQwrPbwdL6PhXujxW37FSSQZ1JiwsST4cqQzDeyXtP79zkvFD3"]
2903737ms th_a       thread.cpp:95                 thread               ] name:p2p tid:3051082832
2904252ms th_a       application.cpp:127           reset_p2p_node       ] Configured p2p node to listen on 0.0.0.0:59175
2904272ms th_a       thread.cpp:95                 thread               ] name:ntp tid:3023819856
2904276ms th_a       witness.cpp:143               plugin_startup       ] No witnesses configured! Please add witness IDs and private keys to configuration.
2904280ms th_a       main.cpp:165                  main                 ] Started witness node on a chain with 0 blocks.
2904285ms th_a       main.cpp:166                  main                 ] Chain ID is 3a5fd421c8af8d9d6f0e5b70f00c1756c8b1609083196a0ef82e395c5e8f480e
2904283ms ntp        ntp.cpp:77                    request_now          ] resolving... ["pool.ntp.org",123]
2904317ms ntp        ntp.cpp:81                    request_now          ] sending request to 202.112.29.82:123
2904365ms ntp        ntp.cpp:147                   read_loop            ] received ntp reply from 202.112.29.82:123
2904369ms ntp        ntp.cpp:161                   read_loop            ] ntp offset: 10573019371415, round_trip_delay 47986
2904373ms ntp        ntp.cpp:181                   read_loop            ] NTP time and local time vary by more than a day! ntp:2015-10-24T08:45:23 local:2015-06-23T23:48:24
3204321ms ntp        ntp.cpp:77                    request_now          ] resolving... ["pool.ntp.org",123]
3204333ms ntp        ntp.cpp:81                    request_now          ] sending request to 202.118.1.130:123
pi@raspberrypi:~$ witness_node
2903143ms th_a       witness.cpp:70                plugin_initialize    ] key_id_to_wif_pair: ["GPH6MRyAjQq8ud7hVNYcfnVPJqcVpscN5So8BhtHuGYqET5GDW5CV","5KQwrPbwdL6PhXujxW37FSSQZ1JiwsST4cqQzDeyXtP79zkvFD3"]
2903737ms th_a       thread.cpp:95                 thread               ] name:p2p tid:3051082832
2904252ms th_a       application.cpp:127           reset_p2p_node       ] Configured p2p node to listen on 0.0.0.0:59175
2904272ms th_a       thread.cpp:95                 thread               ] name:ntp tid:3023819856
2904276ms th_a       witness.cpp:143               plugin_startup       ] No witnesses configured! Please add witness IDs and private keys to configuration.
2904280ms th_a       main.cpp:165                  main                 ] Started witness node on a chain with 0 blocks.
2904285ms th_a       main.cpp:166                  main                 ] Chain ID is 3a5fd421c8af8d9d6f0e5b70f00c1756c8b1609083196a0ef82e395c5e8f480e
2904283ms ntp        ntp.cpp:77                    request_now          ] resolving... ["pool.ntp.org",123]
2904317ms ntp        ntp.cpp:81                    request_now          ] sending request to 202.112.29.82:123
2904365ms ntp        ntp.cpp:147                   read_loop            ] received ntp reply from 202.112.29.82:123
2904369ms ntp        ntp.cpp:161                   read_loop            ] ntp offset: 10573019371415, round_trip_delay 47986
2904373ms ntp        ntp.cpp:181                   read_loop            ] NTP time and local time vary by more than a day! ntp:2015-10-24T08:45:23 local:2015-06-23T23:48:24
3204321ms ntp        ntp.cpp:77                    request_now          ] resolving... ["pool.ntp.org",123]
3204333ms ntp        ntp.cpp:81                    request_now          ] sending request to 202.118.1.130:123

I get this same thing.  It just sits there without downloading  anything.   Does the Pi have enough RAM to run this?  My windows machine uses 1GB to run a node.

18
Technical Support / Vesting Period problem
« on: March 21, 2016, 06:03:29 pm »
My vesting period has not changed in several days.  In fact, it may have been weeks since I noticed it not changing.

The available balance listed on CryptoFresh looks like it is accurate. 

Is there a way to "refresh" this data or is it a bug?  I am using BitShares 2.0.160314 Light

19
Technical Support / Re: Why annual memberships are going away
« on: March 17, 2016, 04:13:14 pm »
Quote from: theoretical on March 10, 2016, 03:43:03 pm
Quote from: mint chocolate chip on March 10, 2016, 02:36:02 pm
Unless you actually referred annual members...those referrers get screwed.

Most of the 31 annual members were either registered by OpenLedger or existed at genesis.  There are exactly four actual referrals of annual memberships, by three people.  If the community thinks reimbursing them is important, it would be possible to set up a worker to pay them manually (or make arrangements with an existing worker to do this).  One of those four annual memberships upgraded to LTM on its own, so their referrer has already been paid.  The remaining two referrers (two of the three accounts were referred by the same referrer) are:

1.2.97634 (referred annual member in block #3028579)
1.2.32176 (referred annual members 1.2.97382, 1.2.101152 who upgraded in blocks #1391978, #3255854)

I was the one who got an annual membership then upgraded to lifetime.  Looks like I should have waited and gotten it for free... 

20
Technical Support / Re: Transfer a UIA
« on: February 26, 2016, 04:49:37 pm »
Quote from: xeroc on February 26, 2016, 04:43:18 pm

I don't get why you need to approve transfers then in the first place?!

I asked myself the same question, and the only reason I could come up with was because it could circumvent the market trading.  Does that really matter, probably not.  But the reason that I kept that flag was because it was set by default and that all other active assets I looked at it had that flag also.  I just assumed I was missing something.  Maybe I am not...

21
Technical Support / Re: Transfer a UIA
« on: February 26, 2016, 04:37:24 pm »
Quote from: xeroc on February 26, 2016, 03:44:04 pm
To be honest .. I never looked into that feature ..
But I assume it has to do with the "override_transfer" operation that is not implemented in the GUI yet ..

Or did you mean that this operation was not implemented in the testnet version?

22
Technical Support / Re: Transfer a UIA
« on: February 26, 2016, 03:54:42 pm »
Quote from: xeroc on February 26, 2016, 03:44:04 pm
To be honest .. I never looked into that feature ..
But I assume it has to do with the "override_transfer" operation that is not implemented in the GUI yet ..

That stinks.  I was looking to setup a UIA as a gateway between an alt currency and bitshares exchange.  Basically, user transfers alt currency to me, then I transfer UIA to them in bitshares.  The do the reverse to cash out alt currency.  That all hinges on the transfer of the asset.  Would asset owners need to use the CLI wallet to make the transfer then?

I could setup a smart coin, but I don't have much BTS to fill the initial collateral pool.  In addition, I don't quite understand how the smartcoin owner could then withdraw it from the bitshares exchange, if they can at all.

23
Technical Support / Transfer a UIA
« on: February 26, 2016, 02:29:08 pm »
If I create a UIA and set the flag that Issuer must approve transfer, how does it get approved?  I tried in the testnet, but couldn't find a way to issue a transfer for approval.

Pages: 1 [2]

Page created in 0.026 seconds with 23 queries.