Author Topic: [ANN] MMC.1GH.COM - GPU mining, CPU mining ★  (Read 161191 times)

0 Members and 1 Guest are viewing this topic.

Offline billgeo

  • Newbie
  • *
  • Posts: 16
    • View Profile
would be cool though if you could set vents to 70% because others may have the problem also and get overheated cards maybe not even noticing

Well, thats OUR responsibility.
If reorder could incorporate some auto-fan fanctionality in the miner, it'll be great,
but he does not have to do it (esp. since there are other tools to do the job), its something extra.

The miner core (i.e. its optimized ability to solve the crypto algo) is the priority here.
After that we can worry about extra options...

I run the gpu miner along with cgminer and set all GPU config from there.

Can you actualy do that? How?
Can you just run cgminer for the temp and autofan option and not actualy mine anything???
10 kinds of people...

Offline leezj

  • Newbie
  • *
  • Posts: 5
    • View Profile
help!!
one of my 280x is hanging with this message

MC2Hasher:0 initialized on device: Tahiti
type: 4, vendor: Advanced Micro Devices, Inc., mem: 3221225472 with 1-pass algo

Offline BZC

  • Newbie
  • *
  • Posts: 6
    • View Profile
Please update 5xxx and 6xxx series  :'(

Offline Trokhon

  • Newbie
  • *
  • Posts: 10
    • View Profile
There is also this: https://code.google.com/p/overdrive5/

yes this worked got it down under 70 degree celsius with 70% fan

thanks a lot

would be cool though if you could set vents to 70% because others may have the problem also and get overheated cards maybe not even noticing

Offline reorder

  • Sr. Member
  • ****
  • Posts: 400
    • View Profile

Offline itsik78

  • Sr. Member
  • ****
  • Posts: 297
    • View Profile
please include fan control option my temperature runs crazy and I cant control fan speed linux due to R290 newest drivers

I run the gpu miner along with cgminer and set all GPU config from there.

Offline Trokhon

  • Newbie
  • *
  • Posts: 10
    • View Profile
please include fan control option my temperature runs crazy and I cant control fan speed linux due to R290 newest drivers

Offline reorder

  • Sr. Member
  • ****
  • Posts: 400
    • View Profile
Thu Jan 09 18:28:09 2014 Worker 2 hpm 10.891952 wpm 10.488547 A/R/T 17/5/1 -> RP
C result: Rejected
Thu Jan 09 18:28:17 2014 Worker 0 hpm 19.299317 wpm 19.168029 A/R/T 5/21/2 -> RP
C result: Accepted
Thu Jan 09 18:28:20 2014 Worker 0 hpm 19.298349 wpm 19.167954 A/R/T 5/22/2 -> RP
C result: Rejected
Thu Jan 09 18:28:26 2014 Worker 2 hpm 11.401105 wpm 10.494199 A/R/T 18/5/1 -> RP
C result: Accepted
Thu Jan 09 18:28:48 2014 Worker 1 hpm 9.072098 wpm 10.439127 A/R/T 19/0/2 -> RPC
 result: Accepted
Thu Jan 09 18:28:52 2014 Worker 1 hpm 9.234577 wpm 10.465854 A/R/T 20/0/2 -> RPC
 result: Accepted
Thu Jan 09 18:28:58 2014 Worker 0 hpm 19.417124 wpm 19.175918 A/R/T 5/23/2 -> RP
C result: Rejected
Thu Jan 09 18:29:01 2014 Worker 0 hpm 19.513207 wpm 19.154069 A/R/T 5/24/2 -> RP
C result: Rejected
Thu Jan 09 18:29:05 2014 Worker 2 hpm 10.860290 wpm 10.502259 A/R/T 19/5/1 -> RP
C result: Accepted
Thu Jan 09 18:29:09 2014 Worker 1 hpm 9.275574 wpm 10.464750 A/R/T 21/0/2 -> RPC
 result: Accepted
Thu Jan 09 18:29:10 2014 Worker 1 hpm 9.385377 wpm 10.454597 A/R/T 22/0/2 -> RPC
 result: Accepted
Thu Jan 09 18:29:17 2014 Worker 0 hpm 19.291820 wpm 19.175604 A/R/T 5/25/2 -> RP
C result: Rejected
Thu Jan 09 18:29:17 2014 Worker 2 hpm 10.967407 wpm 10.500709 A/R/T 20/5/1 -> RP
C result: Accepted
Thu Jan 09 18:29:23 2014 Worker 0 hpm 19.407404 wpm 19.177731 A/R/T 5/26/2 -> RP
C result: Rejected

worker 0 is msi 280x,
worker 1&2 are msi 270x
I have rechecked, and you should always get reject reason for rejected shares in new version of miner. Could you please re-check if you are using the latest one (browser cache etc)?
Generally, it looks like hardware errors, perhaps due to power or heat issues.

Offline dogexxx

  • Newbie
  • *
  • Posts: 5
    • View Profile
Thu Jan 09 18:28:09 2014 Worker 2 hpm 10.891952 wpm 10.488547 A/R/T 17/5/1 -> RP
C result: Rejected
Thu Jan 09 18:28:17 2014 Worker 0 hpm 19.299317 wpm 19.168029 A/R/T 5/21/2 -> RP
C result: Accepted
Thu Jan 09 18:28:20 2014 Worker 0 hpm 19.298349 wpm 19.167954 A/R/T 5/22/2 -> RP
C result: Rejected
Thu Jan 09 18:28:26 2014 Worker 2 hpm 11.401105 wpm 10.494199 A/R/T 18/5/1 -> RP
C result: Accepted
Thu Jan 09 18:28:48 2014 Worker 1 hpm 9.072098 wpm 10.439127 A/R/T 19/0/2 -> RPC
 result: Accepted
Thu Jan 09 18:28:52 2014 Worker 1 hpm 9.234577 wpm 10.465854 A/R/T 20/0/2 -> RPC
 result: Accepted
Thu Jan 09 18:28:58 2014 Worker 0 hpm 19.417124 wpm 19.175918 A/R/T 5/23/2 -> RP
C result: Rejected
Thu Jan 09 18:29:01 2014 Worker 0 hpm 19.513207 wpm 19.154069 A/R/T 5/24/2 -> RP
C result: Rejected
Thu Jan 09 18:29:05 2014 Worker 2 hpm 10.860290 wpm 10.502259 A/R/T 19/5/1 -> RP
C result: Accepted
Thu Jan 09 18:29:09 2014 Worker 1 hpm 9.275574 wpm 10.464750 A/R/T 21/0/2 -> RPC
 result: Accepted
Thu Jan 09 18:29:10 2014 Worker 1 hpm 9.385377 wpm 10.454597 A/R/T 22/0/2 -> RPC
 result: Accepted
Thu Jan 09 18:29:17 2014 Worker 0 hpm 19.291820 wpm 19.175604 A/R/T 5/25/2 -> RP
C result: Rejected
Thu Jan 09 18:29:17 2014 Worker 2 hpm 10.967407 wpm 10.500709 A/R/T 20/5/1 -> RP
C result: Accepted
Thu Jan 09 18:29:23 2014 Worker 0 hpm 19.407404 wpm 19.177731 A/R/T 5/26/2 -> RP
C result: Rejected

worker 0 is msi 280x,
worker 1&2 are msi 270x

Offline reorder

  • Sr. Member
  • ****
  • Posts: 400
    • View Profile
recoder,
I meet this problem too in MSI 280X.

What might be the cause of increasing rates of rejects, it usually gets worse later.

I used XFX 280X very good, but meet many rejects in MSI 280X.

after a hour, XFX 280x gets 150 accepts ,but  MSI 280x gets 70 accepts.
after 2 hours MSI gets worse result. it above gets one accept after 10 rejects.
I change MSI  270X, it gets good result,but half hpm 280X.
So I cannot mine MMC using MSI 280X. so bad.
I need help.
Please update your miner (download location is the same) and post your reject reasons.

no reason display. win7 64bit,  just download from http://mmcdl.1gh.com/mc2-1gh-win.zip
Nothing is printed after 'Rejected'? Would you please copy-paste a few lines (PM)?

Offline dogexxx

  • Newbie
  • *
  • Posts: 5
    • View Profile
recoder,
I meet this problem too in MSI 280X.

What might be the cause of increasing rates of rejects, it usually gets worse later.

I used XFX 280X very good, but meet many rejects in MSI 280X.

after a hour, XFX 280x gets 150 accepts ,but  MSI 280x gets 70 accepts.
after 2 hours MSI gets worse result. it above gets one accept after 10 rejects.
I change MSI  270X, it gets good result,but half hpm 280X.
So I cannot mine MMC using MSI 280X. so bad.
I need help.
Please update your miner (download location is the same) and post your reject reasons.

no reason display. win7 64bit,  just download from http://mmcdl.1gh.com/mc2-1gh-win.zip

Offline reorder

  • Sr. Member
  • ****
  • Posts: 400
    • View Profile
8) New getwork MMC pool: http://mmc.1gh.com/

Quote
1GH - 1 Gigahash

Super Stable Server: mmcpool.1gh.com, ports 8080, 8081, 8082, 8083 - use any.

Software:
CPU mining
Win 32, Win 64, Mac 64, Sources

GPU mining
Ubuntu 64-bit, Windows by reorder!

Features
* Autopayouts! Min: 0.5 MMC.

Mining Hardware Comparison https://bitsharestalk.org/index.php?topic=1803.0

Thank you!


it does not work on ubuntu 12.40 LTS

hung@ubuntu:~/app/mc2-1gh-lin-x64$ ^C
hung@ubuntu:~/app/mc2-1gh-lin-x64$ ./mmc-miner
Traceback (most recent call last):
  File "/usr/local/lib/python2.7/dist-packages/cx_Freeze-4.3.2-py2.7-linux-x86_64.egg/cx_Freeze/initscripts/Console.py", line 27, in <module>
  File "run.py", line 5, in <module>
  File "/usr/local/lib/python2.7/dist-packages/pyopencl-2013.1-py2.7-linux-x86_64.egg/pyopencl/__init__.py", line 28, in <module>
  File "ExtensionLoader_pyopencl__cl.py", line 22, in <module>
  File "ExtensionLoader_pyopencl__cl.py", line 14, in __bootstrap__
ImportError: /home/hung/app/mc2-1gh-lin-x64/pyopencl._cl.so: symbol clRetainDevice, version OPENCL_1.2 not defined in file libOpenCL.so.1 with link time reference

do you have a good suggest?

best regards
https://groups.google.com/forum/#!topic/linux.debian.bugs.dist/HzVET-im8VQ

Offline hung

  • Newbie
  • *
  • Posts: 3
    • View Profile
8) New getwork MMC pool: http://mmc.1gh.com/

Quote
1GH - 1 Gigahash

Super Stable Server: mmcpool.1gh.com, ports 8080, 8081, 8082, 8083 - use any.

Software:
CPU mining
Win 32, Win 64, Mac 64, Sources

GPU mining
Ubuntu 64-bit, Windows by reorder!

Features
* Autopayouts! Min: 0.5 MMC.

Mining Hardware Comparison https://bitsharestalk.org/index.php?topic=1803.0

Thank you!


it does not work on ubuntu 12.40 LTS

hung@ubuntu:~/app/mc2-1gh-lin-x64$ ^C
hung@ubuntu:~/app/mc2-1gh-lin-x64$ ./mmc-miner
Traceback (most recent call last):
  File "/usr/local/lib/python2.7/dist-packages/cx_Freeze-4.3.2-py2.7-linux-x86_64.egg/cx_Freeze/initscripts/Console.py", line 27, in <module>
  File "run.py", line 5, in <module>
  File "/usr/local/lib/python2.7/dist-packages/pyopencl-2013.1-py2.7-linux-x86_64.egg/pyopencl/__init__.py", line 28, in <module>
  File "ExtensionLoader_pyopencl__cl.py", line 22, in <module>
  File "ExtensionLoader_pyopencl__cl.py", line 14, in __bootstrap__
ImportError: /home/hung/app/mc2-1gh-lin-x64/pyopencl._cl.so: symbol clRetainDevice, version OPENCL_1.2 not defined in file libOpenCL.so.1 with link time reference

do you have a good suggest?

best regards

Offline reorder

  • Sr. Member
  • ****
  • Posts: 400
    • View Profile
recoder,
I meet this problem too in MSI 280X.

What might be the cause of increasing rates of rejects, it usually gets worse later.

I used XFX 280X very good, but meet many rejects in MSI 280X.

after a hour, XFX 280x gets 150 accepts ,but  MSI 280x gets 70 accepts.
after 2 hours MSI gets worse result. it above gets one accept after 10 rejects.
I change MSI  270X, it gets good result,but half hpm 280X.
So I cannot mine MMC using MSI 280X. so bad.
I need help.
Please update your miner (download location is the same) and post your reject reasons.

Offline dogexxx

  • Newbie
  • *
  • Posts: 5
    • View Profile
recoder,
I meet this problem too in MSI 280X.

What might be the cause of increasing rates of rejects, it usually gets worse later.

I used XFX 280X very good, but meet many rejects in MSI 280X.

after a hour, XFX 280x gets 150 accepts ,but  MSI 280x gets 70 accepts.
after 2 hours MSI gets worse result. it above gets one accept after 10 rejects.
I change MSI  270X, it gets good result,but half hpm 280X.
So I cannot mine MMC using MSI 280X. so bad.
I need help.