All the questions & problems about 2.0 in one thread ;)

[029xue]

My asset lost after import.

I created asset BITBAR and BTSFUND in bts 1.0.

http://bitsharesblocks.com/asset/info?asset=BITBAR
http://bitsharesblocks.com/asset/info?asset=BITFUND

However, after import, only BTSFUND can be see under my asset page. BITBAR dose not show.

Any ideas?

The "My Assets" page is a bit unreliable, if you go to Explorer > Assets, refresh the page, then go back to your account you should find the asset.

This will get fixed eventually but it needs some changes in the backend.

Not work, BITBAR even not listed in Explorer > Assets > User Issues Assets page.

Weird?

Didn't notice it was a "BIT*" asset, looks like BM excluded those assets from the witness node, although I guess they're still in the genesis file.

https://github.com/bitshares/bitshares-2/commit/52d88c57c980ddbf45f8f2f28a1fe5c7e56765f9

The reason is those assets were considered scam assets, although in 1.0 we only filtered this in the GUI, and only removed assets that looked like actual market assets (BITUSD for example)

Sounds reasonable, no any BIT*** assets listed in Explorer > Assets > User Issues Assets page in bts 2.0.

Would the next step be exclude all BTS*** assets?

Is it possible to refund the bts consumed to create those assets?

[svk]

My asset lost after import.

I created asset BITBAR and BTSFUND in bts 1.0.

http://bitsharesblocks.com/asset/info?asset=BITBAR
http://bitsharesblocks.com/asset/info?asset=BITFUND

However, after import, only BTSFUND can be see under my asset page. BITBAR dose not show.

Any ideas?

The "My Assets" page is a bit unreliable, if you go to Explorer > Assets, refresh the page, then go back to your account you should find the asset.

This will get fixed eventually but it needs some changes in the backend.

Not work, BITBAR even not listed in Explorer > Assets > User Issues Assets page.

Weird?

Didn't notice it was a "BIT*" asset, looks like BM excluded those assets from the witness node, although I guess they're still in the genesis file.

https://github.com/bitshares/bitshares-2/commit/52d88c57c980ddbf45f8f2f28a1fe5c7e56765f9

The reason is those assets were considered scam assets, although in 1.0 we only filtered this in the GUI, and only removed assets that looked like actual market assets (BITUSD for example)

[fav]

My asset lost after import.

I created asset BITBAR and BTSFUND in bts 1.0.

http://bitsharesblocks.com/asset/info?asset=BITBAR
http://bitsharesblocks.com/asset/info?asset=BITFUND

However, after import, only BTSFUND can be see under my asset page. BITBAR dose not show.

Any ideas?

open the asset overview page, let it fully load. recheck

[029xue]

My asset lost after import.

I created asset BITBAR and BTSFUND in bts 1.0.

http://bitsharesblocks.com/asset/info?asset=BITBAR
http://bitsharesblocks.com/asset/info?asset=BITFUND

However, after import, only BTSFUND can be see under my asset page. BITBAR dose not show.

Any ideas?

The "My Assets" page is a bit unreliable, if you go to Explorer > Assets, refresh the page, then go back to your account you should find the asset.

This will get fixed eventually but it needs some changes in the backend.

Not work, BITBAR even not listed in Explorer > Assets > User Issues Assets page.

Weird?

[ngkong]

anyone know what is the equivalent of old wallet_account_transaction_history command for RPC API? this command is for querying latest transactions of an account.

[svk]

My asset lost after import.

I created asset BITBAR and BTSFUND in bts 1.0.

http://bitsharesblocks.com/asset/info?asset=BITBAR
http://bitsharesblocks.com/asset/info?asset=BITFUND

However, after import, only BTSFUND can be see under my asset page. BITBAR dose not show.

Any ideas?

The "My Assets" page is a bit unreliable, if you go to Explorer > Assets, refresh the page, then go back to your account you should find the asset.

This will get fixed eventually but it needs some changes in the backend.

[029xue]

My asset lost after import.

I created asset BITBAR and BTSFUND in bts 1.0.

http://bitsharesblocks.com/asset/info?asset=BITBAR
http://bitsharesblocks.com/asset/info?asset=BITFUND

However, after import, only BTSFUND can be see under my asset page. BITBAR dose not show.

Any ideas?

[EstefanTT]

I'll go first !

I couldn't find in the forum an aswer to a problem I have. (I hope it hasn't been already answered)

- I exported the Keys.json using the console in windows 10
- I downloaded the light client
- I tested it before the 10/13
- I could creat a new wallet, import the keys.json, I saw the balances and it get stuck in the "importing balances" page ( it neve finished to import them, I had to close the client)

I waited for the release to retry.

- I downloaded the light client & reinstalled it.
- I could creat a new wallet, import the keys.json and this time I don't even see my balances ...

- I stop there, I didn't hit the import button and and wrote this thread

Here is what I see :



What am I suppose to do now to see my balances and import them ?

This is the same bug I experienced. If you have too many private keys, then when you go to import your balance it takes what seems to be forever. There is no progress bar so we can even know if it's working slowly, or not working at all. The window simply freezes up, and it stays that way.

In my own tests I found that with smaller keys it freezes but eventually works. I also saw that depending on how many private keys you regenerated in the past for whatever reason, determines how many keys you have to import, which determines how long it could take to import.

This has to be fixed as it's a critical bug and UX issue also. If it is possible, just having a progression bar or percentage number would help people to simply wait.

I didn't even hit the import button because it says "No Balances". It doesn't seem to be freezed, it just doesn't display my balances.

I don't want to import if there is no balance.

Also I have some actives shorts. I need to add some collateral to avoid beeing margin called with the recent drop of the price. It's very frustrating to be enable to access my funds.

Do I have to hit the "import" button even if it's showing "No Balances" ?

Anything I can do ?

[oakmaster]

I had the same problem with no balance when try to import my keys on crome for whatever reason they show up in Firefox I just waited and my balances showed up

[luckybit]

Seems, I could solve my problem with balances not showing up, at least I see them in claimed.

First in 0.9.3c console:
wallet_regenerate_keys ACCOUNT-NAME 10500
wallet_export_keys PATH

Then import in graphene.

The problem with this is if you regen too many keys then when you import it takes hours or perhaps even days, if at all. Some people have noted it never imported, others experience it taking hours.

[luckybit]

I'll go first !

I couldn't find in the forum an aswer to a problem I have. (I hope it hasn't been already answered)

- I exported the Keys.json using the console in windows 10
- I downloaded the light client
- I tested it before the 10/13
- I could creat a new wallet, import the keys.json, I saw the balances and it get stuck in the "importing balances" page ( it neve finished to import them, I had to close the client)

I waited for the release to retry.

- I downloaded the light client & reinstalled it.
- I could creat a new wallet, import the keys.json and this time I don't even see my balances ...

- I stop there, I didn't hit the import button and and wrote this thread

Here is what I see :



What am I suppose to do now to see my balances and import them ?

This is the same bug I experienced. If you have too many private keys, then when you go to import your balance it takes what seems to be forever. There is no progress bar so we can even know if it's working slowly, or not working at all. The window simply freezes up, and it stays that way.

In my own tests I found that with smaller keys it freezes but eventually works. I also saw that depending on how many private keys you regenerated in the past for whatever reason, determines how many keys you have to import, which determines how long it could take to import.

This has to be fixed as it's a critical bug and UX issue also. If it is possible, just having a progression bar or percentage number would help people to simply wait.

[pal]

Seems, I could solve my problem with balances not showing up, at least I see them in claimed.

First in 0.9.3c console:
wallet_regenerate_keys ACCOUNT-NAME 10500
wallet_export_keys PATH

Then import in graphene.

[clayop]

I get this error trying to import:

Failed to broadcast the transaction:

now <= trx.expiration:

Did you adjust your clock?

[donkeypong]

I get this error trying to import:

Failed to broadcast the transaction:

now <= trx.expiration:

[pal]

I get really nervous! I can't see my balances. Problem is identical that EstefanTT described.