mc2miner 0.1e - Optimized CPU/GPU Miner

[kanes]

Hello,

any change it will work in win 32?
Thanks

[roaching]

Running W2K8R2 X64 Dual Xeon E5410 16GB Ram

Here is my .bat I am running

mc2miner.exe --url http://mmcpool.1gh.com:8080 --threads 8 --noavx MLAh1fFbJbU4YLVMbS3VD81zeDbEDQp6gF
@pause

Here is the error I am getting. Tried with and without AES-I even though I know my CPU's don't support it. Tried different threads also, works fine on my i7-2600k desktop running win7 64.



Any having similar problems?

I have this error too. I have Athlon x3 425. What i doing wrong? I set --noavx - error not going too.

[annimossity]

Running W2K8R2 X64 Dual Xeon E5410 16GB Ram

Here is my .bat I am running

mc2miner.exe --url http://mmcpool.1gh.com:8080 --threads 8 --noavx MLAh1fFbJbU4YLVMbS3VD81zeDbEDQp6gF
@pause

Here is the error I am getting. Tried with and without AES-I even though I know my CPU's don't support it. Tried different threads also, works fine on my i7-2600k desktop running win7 64.



Any having similar problems?

[validsyntax1210]

1.032 hash/min | 0.000 work/min | SHARE 0 | ACC 0 | REJ 0 (-nan%)

0.988 hash/min | 0.494 work/min | SHARE 0 | ACC 0 | REJ 0 (-nan%)

on the a8 ubuntu 13.1 thanks for your work this miner seems to be working when all other giving me trouble dont know if that hash per minute is good or not im mining memory coins on laptop

[Delinquency]

How are you guys configuring this? Through a bat file or run command? I am a little lost. I have a  bunch of dual xeon e5410's but they do not support AES-I and was recommended this would be a good miner to use but I not sure how to change any of the values within the mc2miner.exe

Any will work. just feed it the correct parameters through cd "DIR" and run the miner executable with your specifics.

Also, use a batch file, it is easier to save your config.

[annimossity]

How are you guys configuring this? Through a bat file or run command? I am a little lost. I have a  bunch of dual xeon e5410's but they do not support AES-I and was recommended this would be a good miner to use but I not sure how to change any of the values within the mc2miner.exe

[ManeBjorn]

I guess I am going to have to give YAM a tryout tonight then and see how it is.
Thanks for the info.

Seems like he ditched the project ever since yvg came through with YAM MMC capabilities.

[Delinquency]

Seems like he ditched the project ever since yvg came through with YAM MMC capabilities.

[ManeBjorn]

Hi I was just wondering if you are close to a new release again?
I've been using the latest and it seems to be the best of the 3 I tried so far.

[ManeBjorn]

I only get about 1 on my A8-5557M using 4 threads. 

NICE!!!

Any results on an AMD A8 series CPU?

[mc2miner]

I want to test the GPU speed of this client (got 2 R9 280x cards).
But the rapidshare links don't seem to work, any other download location available?

http://uploaded.net/file/vbqw54sn

[justhim]

I want to test the GPU speed of this client (got 2 R9 280x cards).
But the rapidshare links don't seem to work, any other download location available?

[billgeo]

Exactly how much cpu time are we donating to support the next version?
I've seen the message come up more than three times in the past few hours.

In the edited OP he states that it mines for 30 seconds to start and 30 seconds every hour.

And that's about 0.83% of your CPU time!

Well, its good to have it stated upfront nice and clear, and not hidden.
So, its just the users choice after all!

[sjasbury]

This new version is also causing my Win 7 64 bit PC to crash also. MC2Miner is the only program running on it. When I switch back the delta version I get no problems.

[reorder]

Btw, the OpenCL kernel is stolen from my closed-source miner, do not expect any better performance from it