Author Topic: arCUDAminer 64 bit v1.0e - PTS GPU miner- STABLE - GTX 780 - 2100 CPM  (Read 74275 times)

0 Members and 1 Guest are viewing this topic.

Offline archit

  • Full Member
  • ***
  • Posts: 161
    • View Profile
Re: arCUDAminer 64 bit v1.0e - PTS GPU miner for Windows
« Reply #188 on: February 01, 2014, 07:16:47 pm »
I have two the same type of card. Will crossfire in a future version add any efficiencies?

Also, are there any performance improvements between version d and version e?

Revert a change that some people reported to cause slow downs so yet, performance improvements in e over d

Offline KhabsCat

  • Newbie
  • *
  • Posts: 10
    • View Profile
Re: arCUDAminer 64 bit v1.0e - PTS GPU miner for Windows
« Reply #187 on: February 01, 2014, 06:46:22 pm »
I have two the same type of card. Will crossfire in a future version add any efficiencies?

Also, are there any performance improvements between version d and version e?

Offline archit

  • Full Member
  • ***
  • Posts: 161
    • View Profile
Re: arCUDAminer 64 bit v1.0e - PTS GPU miner for Windows
« Reply #186 on: January 30, 2014, 08:47:01 am »
Please create <1GB version with Compute 3.5. There are GT630 and GT640 that are Kepler based.

There is a normal compute 3.5 binary too. Also those having problems with cpm drop in cm35_highperf please try the normal cm35 so I can get this sorted out

Offline wsnnwa

  • Jr. Member
  • **
  • Posts: 47
    • View Profile
Re: arCUDAminer 64 bit v1.0e - PTS GPU miner for Windows
« Reply #185 on: January 30, 2014, 03:32:21 am »
I ran arCUDAminer 1.0d for ~45 minutes and my c/m settled right below 1600. I ran arCUDAminer_cm35_highperf.exe



I also ran arCUDAminer 1.0e for 20 minutes, same results. I also ran arCUDAminer_cm35_highperf.exe



Normal arCUDAminer.exe on 1.0e gives me the best result from your miner, ~1800 c/m.

« Last Edit: January 30, 2014, 04:05:19 am by wsnnwa »

Offline wsnnwa

  • Jr. Member
  • **
  • Posts: 47
    • View Profile
Re: arCUDAminer 64 bit v1.0d - PTS GPU miner for Windows
« Reply #184 on: January 29, 2014, 02:40:53 pm »
I have been testing different miners and different pools over the last couple days, as with the poster above I also saw a decrease of ~250 c/m with my GTX 780. I went from ~1730 to ~1400.

There is a different miner that gives me ~2100 c/m but it only runs on be^5r, so 'ill be looking around until I find a suitable one with either 1gh or ypool.

Which miner are we talking about?

This miner, https://bitsharestalk.org/index.php?topic=2378.0.

What does 1.0d give?

~1500 c/m on 1.0d compared to ~2100 c/m on that other miner.

Below is your arCUDAMiner1d.



Below is the other miner.




Edit: Actually your 1.0c gives me more c/m than 1.0d, 1.0c provides ~1700 c/m. Screenshot below containing 1.0c.



Give it at least 45 minutes to stabilize

I will do that, but my system traditionally stabilizes within a couple minutes.

I will post my results later tonight.

Offline archit

  • Full Member
  • ***
  • Posts: 161
    • View Profile
Re: arCUDAminer 64 bit v1.0d - PTS GPU miner for Windows
« Reply #183 on: January 29, 2014, 01:59:47 pm »
I have been testing different miners and different pools over the last couple days, as with the poster above I also saw a decrease of ~250 c/m with my GTX 780. I went from ~1730 to ~1400.

There is a different miner that gives me ~2100 c/m but it only runs on be^5r, so 'ill be looking around until I find a suitable one with either 1gh or ypool.

Which miner are we talking about?

This miner, https://bitsharestalk.org/index.php?topic=2378.0.

What does 1.0d give?

~1500 c/m on 1.0d compared to ~2100 c/m on that other miner.

Below is your arCUDAMiner1d.



Below is the other miner.




Edit: Actually your 1.0c gives me more c/m than 1.0d, 1.0c provides ~1700 c/m. Screenshot below containing 1.0c.



Give it at least 45 minutes to stabilize

Offline Instigater

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: arCUDAminer 64 bit v1.0e - PTS GPU miner for Windows
« Reply #182 on: January 29, 2014, 01:41:09 pm »
Please create <1GB version with Compute 3.5. There are GT630 and GT640 that are Kepler based.

Offline emski

  • Hero Member
  • *****
  • Posts: 1282
    • View Profile
    • http://lnkd.in/nPbhxG
Re: arCUDAminer 64 bit v1.0e - PTS GPU miner for Windows
« Reply #181 on: January 29, 2014, 01:08:39 pm »
GTX 780 + i7 3770K
arCUDAminer_highperf - 1.0e performance ~ 1750                 1.0c performance ~ 1700
arCUDAminer_cm35_highperf - 1.0e performance ~1350        1.0c performance ~1650

There are some performance fluctuations and my methods of getting results are not very reliable (running the executable for about 2 minutes and looking at the last few cpm reports). However the difference in performance of CM35_highperf is clearly noticable.
« Last Edit: January 29, 2014, 01:13:18 pm by emski »

Offline wsnnwa

  • Jr. Member
  • **
  • Posts: 47
    • View Profile
Re: arCUDAminer 64 bit v1.0d - PTS GPU miner for Windows
« Reply #180 on: January 29, 2014, 01:00:49 pm »
I have been testing different miners and different pools over the last couple days, as with the poster above I also saw a decrease of ~250 c/m with my GTX 780. I went from ~1730 to ~1400.

There is a different miner that gives me ~2100 c/m but it only runs on be^5r, so 'ill be looking around until I find a suitable one with either 1gh or ypool.

Which miner are we talking about?

This miner, https://bitsharestalk.org/index.php?topic=2378.0.

What does 1.0d give?

~1500 c/m on 1.0d compared to ~2100 c/m on that other miner.

Below is your arCUDAMiner1d.



Below is the other miner.




Edit: Actually your 1.0c gives me more c/m than 1.0d, 1.0c provides ~1700 c/m. Screenshot below containing 1.0c.

« Last Edit: January 29, 2014, 01:04:36 pm by wsnnwa »

Offline archit

  • Full Member
  • ***
  • Posts: 161
    • View Profile
Re: arCUDAminer 64 bit v1.0d - PTS GPU miner for Windows
« Reply #179 on: January 29, 2014, 12:29:45 pm »
I have been testing different miners and different pools over the last couple days, as with the poster above I also saw a decrease of ~250 c/m with my GTX 780. I went from ~1730 to ~1400.

There is a different miner that gives me ~2100 c/m but it only runs on be^5r, so 'ill be looking around until I find a suitable one with either 1gh or ypool.

Which miner are we talking about?

This miner, https://bitsharestalk.org/index.php?topic=2378.0.

What does 1.0d give?

Offline wsnnwa

  • Jr. Member
  • **
  • Posts: 47
    • View Profile
Re: arCUDAminer 64 bit v1.0d - PTS GPU miner for Windows
« Reply #178 on: January 29, 2014, 12:21:59 pm »
I have been testing different miners and different pools over the last couple days, as with the poster above I also saw a decrease of ~250 c/m with my GTX 780. I went from ~1730 to ~1400.

There is a different miner that gives me ~2100 c/m but it only runs on be^5r, so 'ill be looking around until I find a suitable one with either 1gh or ypool.

Which miner are we talking about?

This miner, https://bitsharestalk.org/index.php?topic=2378.0.

Offline archit

  • Full Member
  • ***
  • Posts: 161
    • View Profile
Re: arCUDAminer 64 bit v1.0d - PTS GPU miner for Windows
« Reply #177 on: January 29, 2014, 09:35:27 am »
I have been testing different miners and different pools over the last couple days, as with the poster above I also saw a decrease of ~250 c/m with my GTX 780. I went from ~1730 to ~1400.

There is a different miner that gives me ~2100 c/m but it only runs on be^5r, so 'ill be looking around until I find a suitable one with either 1gh or ypool.

Which miner are we talking about?

Offline archit

  • Full Member
  • ***
  • Posts: 161
    • View Profile
Re: arCUDAminer 64 bit v1.0d - PTS GPU miner for Windows
« Reply #176 on: January 29, 2014, 08:49:44 am »
Thanks for the response it seems I rushed the testing a bit, will revert the change I think is causing this

Edit:Rolled back the change, devices with compute 3.5 still have a speed improvement.

Please test v1.0e if you still want cm3 back no problem
« Last Edit: January 29, 2014, 09:34:38 am by archit »

Offline Daniel

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: arCUDAminer 64 bit v1.0d - PTS GPU miner for Windows
« Reply #175 on: January 29, 2014, 05:38:01 am »
Excuse me, I'd like to get the cm3 version back and try it on my GTX660. Thanks a lot.

Offline wsnnwa

  • Jr. Member
  • **
  • Posts: 47
    • View Profile
Re: arCUDAminer 64 bit v1.0d - PTS GPU miner for Windows
« Reply #174 on: January 29, 2014, 04:07:07 am »
I have been testing different miners and different pools over the last couple days, as with the poster above I also saw a decrease of ~250 c/m with my GTX 780. I went from ~1730 to ~1400.

There is a different miner that gives me ~2100 c/m but it only runs on be^5r, so 'ill be looking around until I find a suitable one with either 1gh or ypool.