Author Topic: [ANN] PTS.1GH.COM - GPU, CPU mining ★ New version 1.4! Please upgrade ASAP! ★  (Read 94974 times)

0 Members and 1 Guest are viewing this topic.

Offline Brekyrself

  • Hero Member
  • *****
  • Posts: 511
    • View Profile
reorder:

Any plans on a faster miner for these last few days?  Some of the other miners are incredibly fast but do not work with 1gh pool.

Thanks

Offline reorder

  • Sr. Member
  • ****
  • Posts: 400
    • View Profile
reorder:

Any plans on a faster miner for these last few days?  Some of the other miners are incredibly fast but do not work with 1gh pool.

Thanks
Sorry, got no time at all to reimplement this.. And NaN apparently would not move host/port to commandline parameters because we do not support the hidden developer fee feature of the protocol :) However, I will opensource the miner tomorrow so it can possibly be used for noirshares etc.

Offline Brekyrself

  • Hero Member
  • *****
  • Posts: 511
    • View Profile
reorder:

Any plans on a faster miner for these last few days?  Some of the other miners are incredibly fast but do not work with 1gh pool.

Thanks
Sorry, got no time at all to reimplement this.. And NaN apparently would not move host/port to commandline parameters because we do not support the hidden developer fee feature of the protocol :) However, I will opensource the miner tomorrow so it can possibly be used for noirshares etc.

All good, we appreciate all your support in developing the PTS mining scene.

Offline reorder

  • Sr. Member
  • ****
  • Posts: 400
    • View Profile
PTS miner source is now online on https://github.com/reorder/pts-1gh

Offline old_pioner

  • Jr. Member
  • **
  • Posts: 21
    • View Profile
OK, i did compare 1gh vs gpuz0.4c
Code: [Select]
Sun Mar 02 23:02:02 2014 Share accepted
Sun Mar 02 23:02:11 2014 Share accepted
Sun Mar 02 23:02:12 2014 Share accepted
Sun Mar 02 23:02:13 2014 Share accepted
Sun Mar 02 23:02:14 2014 Share accepted
Sun Mar 02 23:02:14 2014 Share accepted
Sun Mar 02 23:02:15 2014 Share accepted
Worker 0-0 GeForce GTX 650 Ti CPM (15m) 460.00 HPM (15m) 164.67 | CPM 458.96 HPM
 164.30 | A/R 10/0 (0.00% rej)
Total CPM (15m) 460.00 HPM (15m) 164.67 | CPM 458.96 HPM 164.30 | A/R 10/0 (0.00
% rej)
Sun Mar 02 23:02:17 2014 Share accepted
Sun Mar 02 23:02:19 2014 Share accepted
Sun Mar 02 23:02:23 2014 Share accepted
Sun Mar 02 23:02:27 2014 Share accepted
Worker 0-0 GeForce GTX 650 Ti CPM (15m) 469.71 HPM (15m) 165.14 | CPM 468.81 HPM
 164.82 | A/R 14/0 (0.00% rej)
Total CPM (15m) 469.71 HPM (15m) 165.14 | CPM 468.81 HPM 164.82 | A/R 14/0 (0.00
% rej)
Worker 0-0 GeForce GTX 650 Ti CPM (15m) 482.00 HPM (15m) 165.50 | CPM 481.19 HPM
 165.22 | A/R 14/0 (0.00% rej)
Total CPM (15m) 482.00 HPM (15m) 165.50 | CPM 481.19 HPM 165.22 | A/R 14/0 (0.00
% rej)
Worker 0-0 GeForce GTX 650 Ti CPM (15m) 488.89 HPM (15m) 165.78 | CPM 488.15 HPM
 165.53 | A/R 14/0 (0.00% rej)
Total CPM (15m) 488.89 HPM (15m) 165.78 | CPM 488.15 HPM 165.53 | A/R 14/0 (0.00
% rej)
Sun Mar 02 23:03:01 2014 Worker 0-0 GeForce GTX 650 Ti CPM (15m) 493.60 HPM (15m
) 166.00 | CPM 492.93 HPM 165.78 | A/R 14/0 (0.00% rej)
Share accepted
Sun Mar 02 23:03:41 2014  Total CPM (15m) 493.60 HPM (15m) 166.00 | CPM 492.93 H
PM 165.78 | A/R 14/0 (0.00% rej)Share accepted

Sun Mar 02 23:03:41 2014 Share accepted
Sun Mar 02 23:03:41 2014 Share accepted
Sun Mar 02 23:03:49 2014 Share accepted
Sun Mar 02 23:03:55 2014 Share accepted
Worker 0-0 GeForce GTX 650 Ti CPM (15m) 560.00 HPM (15m) 193.09 | CPM 483.18 HPM
 166.60 | A/R 20/0 (0.00% rej)
Total CPM (15m) 560.00 HPM (15m) 193.09 | CPM 483.18 HPM 166.60 | A/R 20/0 (0.00
% rej)
Sun Mar 02 23:03:58 2014 Share accepted
Sun Mar 02 23:04:03 2014 Share accepted
Worker 0-0 GeForce GTX 650 Ti CPM (15m) 558.00 HPM (15m) 191.00 | CPM 487.02 HPM
 166.70 | A/R 22/0 (0.00% rej)
Total CPM (15m) 558.00 HPM (15m) 191.00 | CPM 487.02 HPM 166.70 | A/R 22/0 (0.00
% rej)
Sun Mar 02 23:04:14 2014 Share accepted
Sun Mar 02 23:04:26 2014 Share accepted
Worker 0-0 GeForce GTX 650 Ti CPM (15m) 557.54 HPM (15m) 189.54 | CPM 491.42 HPM
 167.06 | A/R 24/0 (0.00% rej)
Total CPM (15m) 557.54 HPM (15m) 189.54 | CPM 491.42 HPM 167.06 | A/R 24/0 (0.00
% rej)
Worker 0-0 GeForce GTX 650 Ti CPM (15m) 554.86 HPM (15m) 188.00 | CPM 493.24 HPM
 167.12 | A/R 24/0 (0.00% rej)
Total CPM (15m) 554.86 HPM (15m) 188.00 | CPM 493.24 HPM 167.12 | A/R 24/0 (0.00
% rej)
Sun Mar 02 23:04:44 2014 Share accepted
Sun Mar 02 23:04:50 2014 Share accepted
Sun Mar 02 23:04:54 2014 Share accepted
Code: [Select]
New block data - height: 57956 tx count: 28
Share found! (BlockHeight: 57956)
collisions/min: 428.5714 Shares total: 1
Rounds per second for Nvidia GPU 0: 2.3000
Share found! (BlockHeight: 57956)
Share found! (BlockHeight: 57956)
Share found! (BlockHeight: 57956)
Share found! (BlockHeight: 57956)
Share found! (BlockHeight: 57956)
collisions/min: 592.0000 Shares total: 6
Rounds per second for Nvidia GPU 0: 2.8000
Share found! (BlockHeight: 57956)
collisions/min: 532.1739 Shares total: 7
Share found! (BlockHeight: 57956)
Rounds per second for Nvidia GPU 0: 2.8000
Share found! (BlockHeight: 57956)
collisions/min: 592.2581 Shares total: 9
New block data - height: 57956 tx count: 28
Rounds per second for Nvidia GPU 0: 2.8000
collisions/min: 566.1538 Shares total: 9
collisions/min: 546.3830 Shares total: 9
Rounds per second for Nvidia GPU 0: 2.8000
collisions/min: 519.2727 Shares total: 9
Rounds per second for Nvidia GPU 0: 2.8000
collisions/min: 520.0000 Shares total: 9
Rounds per second for Nvidia GPU 0: 2.8000
collisions/min: 508.7324 Shares total: 9
Rounds per second for Nvidia GPU 0: 2.7000
Share found! (BlockHeight: 57956)
collisions/min: 505.8228 Shares total: 10
Share found! (BlockHeight: 57956)
collisions/min: 525.5172 Shares total: 11
Rounds per second for Nvidia GPU 0: 2.8000
New block data - height: 57956 tx count: 28
collisions/min: 538.1053 Shares total: 11
Rounds per second for Nvidia GPU 0: 2.8000
Share found! (BlockHeight: 57956)
collisions/min: 534.7573 Shares total: 12
Rounds per second for Nvidia GPU 0: 2.8000
collisions/min: 540.5405 Shares total: 12
Share found! (BlockHeight: 57956)
Rounds per second for Nvidia GPU 0: 2.8000
collisions/min: 554.6218 Shares total: 13
Share found! (BlockHeight: 57956)
Invalid share
Reason: unknown-work
collisions/min: 553.7008 Shares total: 14
Rounds per second for Nvidia GPU 0: 2.8000
Share found! (BlockHeight: 57956)
Invalid share
Reason: unknown-work
collisions/min: 553.7778 Shares total: 15
Rounds per second for Nvidia GPU 0: 2.8000
collisions/min: 556.3636 Shares total: 15
Share found! (BlockHeight: 57956)
Invalid share
Reason: unknown-work
Rounds per second for Nvidia GPU 0: 2.7000
New block data - height: 57956 tx count: 28
collisions/min: 0.0000 Shares total: 16
Rounds per second for Nvidia GPU 0: 2.8000
collisions/min: 648.0000 Shares total: 16
Share found! (BlockHeight: 57956)
Invalid share
Reason: unknown-work
collisions/min: 606.6667 Shares total: 17
Rounds per second for Nvidia GPU 0: 2.8000
collisions/min: 572.3077 Shares total: 17
Rounds per second for Nvidia GPU 0: 2.8000
Share found! (BlockHeight: 57956)
Invalid share
Reason: unknown-work
collisions/min: 564.7059 Shares total: 18
pts1gh 24 shares per 3 min =8/1min
gpuz0.4c good start (11 shares in first minute) and bad finish, only rejects, total shares 18/3min = 6/1min.
Good joob, Reorder!  :)
Forget, fee 1?% vs 5%

Offline LiOoO

  • Newbie
  • *
  • Posts: 4
    • View Profile
Why i can't find 32bit GPU miner for Linux? I can't find it for MMC too, and there is no source to compile from?

Offline reorder

  • Sr. Member
  • ****
  • Posts: 400
    • View Profile
Why i can't find 32bit GPU miner for Linux? I can't find it for MMC too, and there is no source to compile from?
It is opensource now: https://github.com/reorder/pts-1gh
You need python 2.7 with pyopencl module to run it.

Offline LiOoO

  • Newbie
  • *
  • Posts: 4
    • View Profile
Why i can't find 32bit GPU miner for Linux? I can't find it for MMC too, and there is no source to compile from?
It is opensource now: https://github.com/reorder/pts-1gh
You need python 2.7 with pyopencl module to run it.

Can't do it.. Im Linux newbie.. :(
There is no chance to get precompiled 32BIT Debian Linux versions of miner for PTS and MMC?

Offline reorder

  • Sr. Member
  • ****
  • Posts: 400
    • View Profile
Why i can't find 32bit GPU miner for Linux? I can't find it for MMC too, and there is no source to compile from?
It is opensource now: https://github.com/reorder/pts-1gh
You need python 2.7 with pyopencl module to run it.

Can't do it.. Im Linux newbie.. :(
There is no chance to get precompiled 32BIT Debian Linux versions of miner for PTS and MMC?
Well it makes too little a sense, but you can just do this:
Quote
sudo apt-get install git python-pyopencl
git clone https://github.com/reorder/pts-1gh
cd pts-1gh
./miner.py

Offline LiOoO

  • Newbie
  • *
  • Posts: 4
    • View Profile
Why i can't find 32bit GPU miner for Linux? I can't find it for MMC too, and there is no source to compile from?
It is opensource now: https://github.com/reorder/pts-1gh
You need python 2.7 with pyopencl module to run it.

Can't do it.. Im Linux newbie.. :(
There is no chance to get precompiled 32BIT Debian Linux versions of miner for PTS and MMC?
Well it makes too little a sense, but you can just do this:
Quote
sudo apt-get install git python-pyopencl
git clone https://github.com/reorder/pts-1gh
cd pts-1gh
./miner.py

ty.. did what u wrote... now i get error..
 File "./miner.py", line 307
    self.coll_counts = {m: collections.deque() for m in miners}
                                                 ^
SyntaxError: invalid syntax

Offline reorder

  • Sr. Member
  • ****
  • Posts: 400
    • View Profile

ty.. did what u wrote... now i get error..
 File "./miner.py", line 307
    self.coll_counts = {m: collections.deque() for m in miners}
                                                 ^
SyntaxError: invalid syntax
It looks like your python version is older than 2.7. Do you run Debian 6 or older (in wheezy 2.7 is the default)? In this case you could try setting up 2.7 according to this howto: http://www.stylesen.org/python_27_debian_squeeze_60. However, this would also require to resetup pyopencl with pip instead of apt-get.

Even if I make a binary executable, it would still have dependencies on libc (this is how python-to-binary programs work), and it would be tethered to specific distributions then.

Offline LiOoO

  • Newbie
  • *
  • Posts: 4
    • View Profile

ty.. did what u wrote... now i get error..
 File "./miner.py", line 307
    self.coll_counts = {m: collections.deque() for m in miners}
                                                 ^
SyntaxError: invalid syntax
It looks like your python version is older than 2.7. Do you run Debian 6 or older (in wheezy 2.7 is the default)? In this case you could try setting up 2.7 according to this howto: http://www.stylesen.org/python_27_debian_squeeze_60. However, this would also require to resetup pyopencl with pip instead of apt-get.

Even if I make a binary executable, it would still have dependencies on libc (this is how python-to-binary programs work), and it would be tethered to specific distributions then.

I run SMOS Linux Mining  V1.3... 32bit

Offline PYfUnrmLSRcDaV15eBTdiSmAb

  • Newbie
  • *
  • Posts: 2
    • View Profile
('authorization failed with %s:%[email protected]%s:%d', ('PYfUnrmLSRcDaV15eBTdiSmAbhmMMKyTpm',
 'x', 'ptspool.1gh.com', 13335))
Tue Mar 18 18:50:41 2014 Failed to authorize
Tue Mar 18 18:50:41 2014 Stratum connection lost
Tue Mar 18 18:50:42 2014 Starting stratum client to PYfUnrmLSRcDaV15eBTdiSmAbhmM
MKyTpm:[email protected]:13336
Tue Mar 18 18:50:43 2014 Setting new difficulty: 0.0000000199
('authorization failed with %s:%[email protected]%s:%d', ('PYfUnrmLSRcDaV15eBTdiSmAbhmMMKyTpm',
 'x', 'ptspool.1gh.com', 13336))
Tue Mar 18 18:50:45 2014 Failed to authorize
Tue Mar 18 18:50:45 2014 Stratum connection lost
Tue Mar 18 18:50:46 2014 Starting stratum client to PYfUnrmLSRcDaV15eBTdiSmAbhmM
MKyTpm:[email protected]:13333

.bat: pts-miner.exe PYfUnrmLSRcDaV15eBTdiSmAbhmMMKyTpm

What am I doing wrong?  :(

Offline reorder

  • Sr. Member
  • ****
  • Posts: 400
    • View Profile
('authorization failed with %s:%[email protected]%s:%d', ('PYfUnrmLSRcDaV15eBTdiSmAbhmMMKyTpm',
 'x', 'ptspool.1gh.com', 13335))
Tue Mar 18 18:50:41 2014 Failed to authorize
Tue Mar 18 18:50:41 2014 Stratum connection lost
Tue Mar 18 18:50:42 2014 Starting stratum client to PYfUnrmLSRcDaV15eBTdiSmAbhmM
MKyTpm:[email protected]:13336
Tue Mar 18 18:50:43 2014 Setting new difficulty: 0.0000000199
('authorization failed with %s:%[email protected]%s:%d', ('PYfUnrmLSRcDaV15eBTdiSmAbhmMMKyTpm',
 'x', 'ptspool.1gh.com', 13336))
Tue Mar 18 18:50:45 2014 Failed to authorize
Tue Mar 18 18:50:45 2014 Stratum connection lost
Tue Mar 18 18:50:46 2014 Starting stratum client to PYfUnrmLSRcDaV15eBTdiSmAbhmM
MKyTpm:[email protected]:13333

.bat: pts-miner.exe PYfUnrmLSRcDaV15eBTdiSmAbhmMMKyTpm

What am I doing wrong?  :(

It was rather related to a bug on the pool side. It is now fixed, please try again.

Offline PYfUnrmLSRcDaV15eBTdiSmAb

  • Newbie
  • *
  • Posts: 2
    • View Profile
It was rather related to a bug on the pool side. It is now fixed, please try again.
Sank's,now working ok.
You know what's profitability from 4600CPM?
« Last Edit: March 18, 2014, 06:28:13 pm by PYfUnrmLSRcDaV15eBTdiSmAb »