Author Topic: AMD OpenCL Momentum miner  (Read 143813 times)

0 Members and 1 Guest are viewing this topic.

Offline Darkbane

  • Full Member
  • ***
  • Posts: 119
    • View Profile
Re: fast AMD OpenCL PTS miner released
« Reply #345 on: February 14, 2014, 11:59:21 pm »
So now the rig is as follows:

5 x MSI R9 290 running Ubuntu 13.04 & clpts v0.2.2.
Currently mining on Ypool at the moment and getting :

collisions/min : 18908
shares/hr : 2192

The total rig is pulling 1300w.


Hey I was just thinking about this... 2191 is your shares per HOUR right? which comes out to roughly 36 a MINUTE? this seems awfully low to me if I am reading it right... I was tinkering around with 6 x R9 270 cards and was getting 8600 cpm and 33 shares per minute... and thats after it was running overnight for a good 12 hours so it wasn't a quick burst...

I'm wondering if there some difference in whats displayed in windows 64bit 0.1.4 at beeeeer and the version you are running on ubuntu over at ypool? I mean am I accurate, or are you accurate? if we're both accurate, something can't be right lol.

[STATS] 2014-Feb-14 17:54:47 | 8593.08 c/m | 33.35 sh/m | VL: 603 (97.89%), RJ: 13 (2.11%), ST: 0 (0.00%)

am I translating the sh/m correctly into sh/h ? 33.35 x 60 minutes = 2001 shares/hr for me?

which would mean at half the cpm I am almost equal to your shares?

Sometimes I wish english was my first language, I always feel like I am wrong.

========

(answer found: turns out ypool and beeeeer have different difficulty settings, so shares won't always match)
« Last Edit: February 15, 2014, 01:09:20 am by Darkbane »

Offline NaN

  • Full Member
  • ***
  • Posts: 162
    • View Profile
Re: fast AMD OpenCL PTS miner released
« Reply #346 on: February 15, 2014, 12:23:14 am »
beeeeer.org and ypool.net have different share difficulties, so everything is ok. At the moment the beeeeer client shows a share target of 0x00fff..., which translates to <shares per minute> ~ <cpm> / 256 and for ypool we currently have <shares/h> ~< cpm> / 512 * 60 ignoring statistical uncertainties. Please note that the share difficulty can be changed any time by the pool operator.

Offline Darkbane

  • Full Member
  • ***
  • Posts: 119
    • View Profile
Re: fast AMD OpenCL PTS miner released
« Reply #347 on: February 15, 2014, 12:35:27 am »
beeeeer.org and ypool.net have different share difficulties, so everything is ok. At the moment the beeeeer client shows a share target of 0x00fff..., which translates to <shares per minute> ~ <cpm> / 256 and for ypool we currently have <shares/h> ~< cpm> / 512 * 60 ignoring statistical uncertainties. Please note that the share difficulty can be changed any time by the pool operator.

Well that makes the math much easier... so essentially the shares/minute/hour seems to average out to equal CPM based upon the difficulty of 256/512... so we really should only be judging by the CPM as a comparison when we're trading numbers with folks?

Offline shadowK

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: fast AMD OpenCL PTS miner released
« Reply #348 on: February 15, 2014, 01:51:20 am »
Bug reported to developer.

I have 4 r9 290x running on ubuntu 12.10. The driver is 13.12 linux. I tried to run clptes but have an error message.

error in xptMiner/clInit.cpp, line 96: Method clGetDeviceIDs(...) failed (errorcode -1)

Any idea to fix it?

Offline mbender71

  • Jr. Member
  • **
  • Posts: 36
    • View Profile
Re: fast AMD OpenCL PTS miner released
« Reply #349 on: February 15, 2014, 02:04:40 am »
I think I've seen this error before after the AMD drivers crash. First I would check to
see if the AMD drivers are seeing all of your video cards properly :

aticonfig --list-adapters

If you see your adapters then I suggest shutting down your machine and restarting.
Strange things happen when the AMD drivers fail and the only way to get things back
on track is a shutdown/restart of the box. Hope this helps a little.

(I'm running Ubuntu 13.04 x64 kernel 3.8.0-35 with AMD Catalyst 13.12 + 5 x R9 290)

Bug reported to developer.

I have 4 r9 290x running on ubuntu 12.10. The driver is 13.12 linux. I tried to run clptes but have an error message.

error in xptMiner/clInit.cpp, line 96: Method clGetDeviceIDs(...) failed (errorcode -1)

Any idea to fix it?

Offline Alec246

  • Newbie
  • *
  • Posts: 18
    • View Profile
Re: fast AMD OpenCL PTS miner released
« Reply #350 on: February 15, 2014, 04:16:29 am »
I have seen someone talking of getting 3.5K CPM on a 280X. Has anyone ever heard of that?

BTW, AMAZING job on this miner! Keep it coming!!

Offline Schwede65

  • Full Member
  • ***
  • Posts: 65
    • View Profile
Re: fast AMD OpenCL PTS miner released
« Reply #351 on: February 15, 2014, 12:42:20 pm »
I have seen someone talking of getting 3.5K CPM on a 280X. Has anyone ever heard of that?

BTW, AMAZING job on this miner! Keep it coming!!
W7-64-Cata 13.12 / 280X / 1125 core / 1500 mem / 3450 cpm
this 280X-cards are a dream for windows-mining with this fast NaN-miner

my 290X does about the same - NaN suggested a failure in windows compared to linux for this 290X-numbers

Offline Sozin

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: fast AMD OpenCL PTS miner released
« Reply #352 on: February 15, 2014, 02:11:34 pm »
I have seen someone talking of getting 3.5K CPM on a 280X. Has anyone ever heard of that?

BTW, AMAZING job on this miner! Keep it coming!!
W7-64-Cata 13.12 / 280X / 1125 core / 1500 mem / 3450 cpm
this 280X-cards are a dream for windows-mining with this fast NaN-miner

my 290X does about the same - NaN suggested a failure in windows compared to linux for this 290X-numbers
Wow 3450? I'm only getting 2450 on Windows 8 / 14.1 beta drivers...

Offline mbender71

  • Jr. Member
  • **
  • Posts: 36
    • View Profile
Re: fast AMD OpenCL PTS miner released
« Reply #353 on: February 15, 2014, 02:27:28 pm »
Beeeeer Vs YPool

A little off topic but not so much when NaN's incredible miner only works on these two pools.
I used to mine @ Be^5r a week ago but it seems like they are either offline higher than usual
and now the time between solved blocks is increasing (perhaps due to less miners and technical
difficulties like DDoS). YPool has been pretty darn steady the past three days until yesterday when
clpts says it disconnected, will wait 45 seconds, and then just exit out to the command line.

NaN : How do you handle disconnects from the server? Do you only try one time after 45 seconds
         and then just exit out? Last night it happened twice to me and fortunately insomnia had me
         restart clpts by hand. Perhaps I should script it to keep trying. I seem to recall someone else
         asking about fail-over as well and I suspect this is due to the issues these two pools are having
         lately.

Everyone : Which pool do you prefer using, YPool or Be^5r? YPool works so well but I dislike pools
                 that are too large in fear of block control.

Offline rajapatr1

  • Newbie
  • *
  • Posts: 10
    • View Profile
Re: fast AMD OpenCL PTS miner released
« Reply #354 on: February 15, 2014, 02:29:58 pm »
I have seen someone talking of getting 3.5K CPM on a 280X. Has anyone ever heard of that?

BTW, AMAZING job on this miner! Keep it coming!!
W7-64-Cata 13.12 / 280X / 1125 core / 1500 mem / 3450 cpm
this 280X-cards are a dream for windows-mining with this fast NaN-miner

my 290X does about the same - NaN suggested a failure in windows compared to linux for this 290X-numbers
Wow 3450? I'm only getting 2450 on Windows 8 / 14.1 beta drivers...
I'm Got on win8 with 13.10 280x/1125/1500/3475CPM it very Great Performance

Offline rajapatr1

  • Newbie
  • *
  • Posts: 10
    • View Profile
Re: fast AMD OpenCL PTS miner released
« Reply #355 on: February 15, 2014, 02:30:47 pm »
Beeeeer Vs YPool

A little off topic but not so much when NaN's incredible miner only works on these two pools.
I used to mine @ Be^5r a week ago but it seems like they are either offline higher than usual
and now the time between solved blocks is increasing (perhaps due to less miners and technical
difficulties like DDoS). YPool has been pretty darn steady the past three days until yesterday when
clpts says it disconnected, will wait 45 seconds, and then just exit out to the command line.

NaN : How do you handle disconnects from the server? Do you only try one time after 45 seconds
         and then just exit out? Last night it happened twice to me and fortunately insomnia had me
         restart clpts by hand. Perhaps I should script it to keep trying. I seem to recall someone else
         asking about fail-over as well and I suspect this is due to the issues these two pools are having
         lately.

Everyone : Which pool do you prefer using, YPool or Be^5r? YPool works so well but I dislike pools
                 that are too large in fear of block control.
Did you use last version ?? i'm run on win8 it normal not onetime reconnect and out

Offline Sozin

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: fast AMD OpenCL PTS miner released
« Reply #356 on: February 15, 2014, 02:32:27 pm »
I have seen someone talking of getting 3.5K CPM on a 280X. Has anyone ever heard of that?

BTW, AMAZING job on this miner! Keep it coming!!
W7-64-Cata 13.12 / 280X / 1125 core / 1500 mem / 3450 cpm
this 280X-cards are a dream for windows-mining with this fast NaN-miner

my 290X does about the same - NaN suggested a failure in windows compared to linux for this 290X-numbers
Wow 3450? I'm only getting 2450 on Windows 8 / 14.1 beta drivers...
I'm Got on win8 with 13.10 280x/1125/1500/3475CPM it very Great Performance
Mmm I'll have to try the stable driver release. What flags are you using?

Offline rajapatr1

  • Newbie
  • *
  • Posts: 10
    • View Profile
Re: fast AMD OpenCL PTS miner released
« Reply #357 on: February 15, 2014, 02:33:56 pm »
I have seen someone talking of getting 3.5K CPM on a 280X. Has anyone ever heard of that?

BTW, AMAZING job on this miner! Keep it coming!!
W7-64-Cata 13.12 / 280X / 1125 core / 1500 mem / 3450 cpm
this 280X-cards are a dream for windows-mining with this fast NaN-miner

my 290X does about the same - NaN suggested a failure in windows compared to linux for this 290X-numbers
Wow 3450? I'm only getting 2450 on Windows 8 / 14.1 beta drivers...
I'm Got on win8 with 13.10 280x/1125/1500/3475CPM it very Great Performance
Mmm I'll have to try the stable driver release. What flags are you using?
did you run with 2Thread and -a 1 ??

Offline mbender71

  • Jr. Member
  • **
  • Posts: 36
    • View Profile
Re: fast AMD OpenCL PTS miner released
« Reply #358 on: February 15, 2014, 02:35:36 pm »
Beeeeer Vs YPool

A little off topic but not so much when NaN's incredible miner only works on these two pools.
I used to mine @ Be^5r a week ago but it seems like they are either offline higher than usual
and now the time between solved blocks is increasing (perhaps due to less miners and technical
difficulties like DDoS). YPool has been pretty darn steady the past three days until yesterday when
clpts says it disconnected, will wait 45 seconds, and then just exit out to the command line.

NaN : How do you handle disconnects from the server? Do you only try one time after 45 seconds
         and then just exit out? Last night it happened twice to me and fortunately insomnia had me
         restart clpts by hand. Perhaps I should script it to keep trying. I seem to recall someone else
         asking about fail-over as well and I suspect this is due to the issues these two pools are having
         lately.

Everyone : Which pool do you prefer using, YPool or Be^5r? YPool works so well but I dislike pools
                 that are too large in fear of block control.
Did you use last version ?? i'm run on win8 it normal not onetime reconnect and out

Yes... I'm using v.0.2.2 and it's been working wonderful until last night. Right now I'm giving be^5r
a shot but goodness, they are sometimes like 3 hours between block solves! Still waiting. Who knows,
perhaps my ISP was just having problems last night and it was me.. but still I was surprised that clpts
would just exit out (cleanly).

Offline Sozin

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: fast AMD OpenCL PTS miner released
« Reply #359 on: February 15, 2014, 02:36:40 pm »
did you run with 2Thread and -a 1 ??
This is what I'm using right now:

-p x -t 0,1,3 -a 1