AMD OpenCL Momentum miner

[Mfqrs3]

Hi NaN,
Thanks for the latest miner!

It's working fine in Win7 64bit with latest 14.3 beta drivers, but it doesn't work with win 8.1 64bit with 13.12 drivers, R9 270, R9 280x or R9 290 cards.

Error: Compilation from LLVMIR binary to IL text failed!

[chaosz88]

I'm trying to run the Miner on Linux Xubuntu but it's sayinh No GPU find with Device Id 0 , tried with 1 too. Running only one GPU on this machine, and I run cgminer with no problem. Catalyst 13

 Any ideas?

I got the same error with Catalyst 13.12. Upgraded my Catalyst to latest 14 beta (currently 14.3 beta) solved it. 

[chaosz88]

I used C++11 for the new miner. Is your glibc up to date? Perhaps I should revert to boost and statically link it. Which distro do you use?
EDIT: Oh, the correct syntax is
./clpts -o 0,6 Pezz4JUPfpAFTSSwWgp1TMpCcS1YvEqVsn -u ozzy.PTS_1 -p x -t 0,0,1,1,2,2 -a 2

yea i also tried the ./clpts -o 0,6 Pezz4JUPfpAFTSSwWgp1TMpCcS1YvEqVsn -u ozzy.PTS_1 -p x -t 0,0,1,1,2,2 -a 2

but it didnt work .And i dont know if i have the latest c++11 i dont know much about linux (i am using ubuntu 12.04 )
edit i manage to install but :
installed
                      Conflicts: libstdc++6-4.5-dbg but 4.5.3-12ubuntu2 is to be installed
                      Conflicts: libstdc++6-4.6-dbg but 4.6.4-1ubuntu1~12.04 is to be installed
 libstdc++6-4.7-doc : Conflicts: libstdc++6-4.4-doc but 4.4.7-1ubuntu2 is to be installed
                      Conflicts: libstdc++6-4.5-doc but 4.5.3-12ubuntu2 is to be installed
                      Conflicts: libstdc++6-4.6-doc but 4.6.4-1ubuntu1~12.04 is to be installed
 libstdc++6-4.8-dbg : Conflicts: libstdc++6-4.4-dbg but 4.4.7-1ubuntu2 is to be installed
                      Conflicts: libstdc++6-4.5-dbg but 4.5.3-12ubuntu2 is to be installed
                      Conflicts: libstdc++6-4.6-dbg but 4.6.4-1ubuntu1~12.04 is to be installed
                      Conflicts: libstdc++6-4.7-dbg but 4.7.3-2ubuntu1~12.04 is to be installed
E: Unable to correct problems, you have held broken packages.

I got the same error with Ubuntu 12.04, I solved it by

sudo apt-get install libstdc++6

[battleaxe]

So did anyone figure out how to adjust two or more AMD cards in Linux while using this miner?

[Alec246]

I'm trying to run the Miner on Linux Xubuntu but it's sayinh No GPU find with Device Id 0 , tried with 1 too. Running only one GPU on this machine, and I run cgminer with no problem. Catalyst 13

 Any ideas?

[upcpu]

The new version v1.0 with multi-pool support and pool fallback. I'm sorry that the miner is late but I had not much time in the last weeks.

Would you considering to support pts.upcpu.com? We are supporting xpt protocol now.

[NewMine]

Is failover the only new update to the miner? Because my col/min dropped about 30% with this new one and share/min was even lower.

Which graphics card do you use and what is your driver? On my 280x the Catalyst 13.12 was much faster than Catalyst 14.2 beta and 14.3 beta. I removed some overhead so that I expect that the new version should be a little bit faster than the old one. Also let it run long enough to get good statistics.

HD 7970. I let I run for about 20 minutes. I let it go longer today.

[ozzy]

I used C++11 for the new miner. Is your glibc up to date? Perhaps I should revert to boost and statically link it. Which distro do you use?
EDIT: Oh, the correct syntax is
./clpts -o 0,6 Pezz4JUPfpAFTSSwWgp1TMpCcS1YvEqVsn -u ozzy.PTS_1 -p x -t 0,0,1,1,2,2 -a 2

yea i also tried the ./clpts -o 0,6 Pezz4JUPfpAFTSSwWgp1TMpCcS1YvEqVsn -u ozzy.PTS_1 -p x -t 0,0,1,1,2,2 -a 2

but it didnt work .And i dont know if i have the latest c++11 i dont know much about linux (i am using ubuntu 12.04 )
edit i manage to install but :
installed
                      Conflicts: libstdc++6-4.5-dbg but 4.5.3-12ubuntu2 is to be installed
                      Conflicts: libstdc++6-4.6-dbg but 4.6.4-1ubuntu1~12.04 is to be installed
 libstdc++6-4.7-doc : Conflicts: libstdc++6-4.4-doc but 4.4.7-1ubuntu2 is to be installed
                      Conflicts: libstdc++6-4.5-doc but 4.5.3-12ubuntu2 is to be installed
                      Conflicts: libstdc++6-4.6-doc but 4.6.4-1ubuntu1~12.04 is to be installed
 libstdc++6-4.8-dbg : Conflicts: libstdc++6-4.4-dbg but 4.4.7-1ubuntu2 is to be installed
                      Conflicts: libstdc++6-4.5-dbg but 4.5.3-12ubuntu2 is to be installed
                      Conflicts: libstdc++6-4.6-dbg but 4.6.4-1ubuntu1~12.04 is to be installed
                      Conflicts: libstdc++6-4.7-dbg but 4.7.3-2ubuntu1~12.04 is to be installed
E: Unable to correct problems, you have held broken packages.

[NaN]

I used C++11 for the new miner. Is your glibc up to date? Perhaps I should revert to boost and statically link it. Which distro do you use?
EDIT: Oh, the correct syntax is
./clpts -o 0,6 Pezz4JUPfpAFTSSwWgp1TMpCcS1YvEqVsn -u ozzy.PTS_1 -p x -t 0,0,1,1,2,2 -a 2

[ozzy]

You're using a pool that requires a valid payout address (-o 0). The correct syntax would be
./clpts -o 0,6 <payout-address> -u ozzy.PTS_1 -p x -t 0,0,1,1,2,2 -a 2

ok i did this:

#!/bin/bash

./clpts -o 0,6 <Pezz4JUPfpAFTSSwWgp1TMpCcS1YvEqVsn> -u ozzy.PTS_1 -p x -t 0,0,1,1,2,2 -a 2

but still same :/

[NaN]

You're using a pool that requires a valid payout address (-o 0). The correct syntax would be
./clpts -o 0,6 <payout-address> -u ozzy.PTS_1 -p x -t 0,0,1,1,2,2 -a 2

[ozzy]

i was using v.022 flawless @linux but when i try to launch clpts-v1.0a_linux_x86-64_Catalyst14 the miner just opens and closes .My .sh file
#!/bin/bash

./clpts -o 0,6 -u ozzy.PTS_1 -p x -t 0,0,1,1,2,2 -a 2

what am i doing wrong?

[NaN]

Is failover the only new update to the miner? Because my col/min dropped about 30% with this new one and share/min was even lower.

Which graphics card do you use and what is your driver? On my 280x the Catalyst 13.12 was much faster than Catalyst 14.2 beta and 14.3 beta. I removed some overhead so that I expect that the new version should be a little bit faster than the old one. Also let it run long enough to get good statistics.

[stanmin]

To fix the glibc issue run

Code: [Select]

sudo add-apt-repository ppa:ubuntu-toolchain-r/test
sudo apt-get update
sudo apt-get install libstdc++


Try this version for some card：
270x Win7 64bit 13.12 system hang, 0.22 is ok
280x Win7 64bit 13.12 ok
290 Win7 64 14.1 ok, but slow
290 ubuntu 12.04 64bit 13.12, get following error(both 13 and 14 binary), but 0.22 is ok

./clpts:/usr/lib/x86_64-linux-gnu/libstdc++.so.6: version "GLIBCXX_3.4.18' not found(required by ./clpts)
./clpts:/usr/lib/x86_64-linux-gnu/libstdc++.so.6: version "GLIBCXX_3.4.19' not found(required by ./clpts)


So I have to use 290 in ubuntu with version 0.22

Is it some driver version error?

The new version v1.0 with multi-pool support and pool fallback. I'm sorry that the miner is late but I had not much time in the last weeks.

[justmwa]

Hrm..

Code: [Select]

error in gpuhash.cpp, line 79: Method clCreateBuffer(...) for binned_data failed (errorcode -61)
trying cat14.3b1 on Ubuntu 13.10.
edit: I ran aticonfig --initial with no screen attached, and it generated a running X conf with no resolution. After putting one and rebooting, no problem anymore.