[ANN] ptsweb.beeeeer.org - Protoshares mining sub-pool

[ionstorm66]

system:10060 = timeout for connection
but the pool is definetely running and connectable
something's blocking your connection

(except you were "lucky" and tested your connection while i was working on the pool software for ~3 minutes...)

Having the same issue on 2 machines at physically different places. I also can't ping the server.

[nitrominer]

system:10060 = timeout for connection
but the pool is definetely running and connectable
something's blocking your connection

(except you were "lucky" and tested your connection while i was working on the pool software for ~3 minutes...)

Is there another pool or port that I could add, it may be something in my network that I don't have access to change. I was mining with the protoshare wallet earlier on this machine and it was working OK with the following added to it:  -connect=168.63.12.227:80

Can I add that in the edit file?

[xolokram]

system:10060 = timeout for connection
but the pool is definetely running and connectable
something's blocking your connection

(except you were "lucky" and tested your connection while i was working on the pool software for ~3 minutes...)

[nitrominer]

This is all it does for me:

Code Select Expand



C:\Users\admin\Downloads\ptsminer_v07a_x64_bundle_newer>ptsminer_intel.exe PtR7i
WBNsT1KzujorWt6Cq7tet4XeJ6m2L 3 27 sph
********************************************
*** ptsminer - Pts Pool Miner v0.7 RC2 <experimental>
*** by xolokram/TB - www.beeeeer.org - glhf
***
*** press CTRL+C to exit
********************************************
using SPHLIB
spawning 3 worker thread(s)
[WORKER[WORKER2] Hello, World![WORKER0] Hello, World!

[WORKER0] GoGoGo!1] Hello, World!
[WORKER
[WORKER1] GoGoGo!
2] GoGoGo!
connecting to 54.201.26.128:1337
system:10060
connecting to 54.201.26.128:1337
system:10060


[xolokram]

@nitrominer:
that looks fine, do you get any error message or output from the miner?

/edit: i can connect from my place with your .bat, just tested it

@drmyfore:
collision / minute <-- the actual work that's done to find a protoshares block (aka your performance, compare this to others)
shares / minute <-- the # of shares you're submitting, this is also depending on the server config (aka sharetarget, this is not a good measure to compare)

SMALL POOL MAINTENANCE INCOMING *done*

[drmyfore]

could you tell me the difference between c/m and sh/m?
My computer are 491 c/m 7.7 sh/m (it seemed that sh/m is in slow)
How to calc 24h/1d can miner how many pts?

[nitrominer]

@gabbo+nitrominer:
what about showing us your .bat content?

ps. (very) small server downtime incoming due to some maintenance

Code Select Expand

ptsminer_intel.exe PtR7iWBNsT1KzujorWt6Cq7tet4XeJ6m2L 3 27 sph

[xolokram]

@gabbo+nitrominer:
what about showing us your .bat content?

ps. (very) small server downtime incoming due to some maintenance

[gabbo876]

Hi all,

Looking for your help. Each time I try to open ptsminer (v05 or v07) it closes immediately. This happens both before and after I have edited the "EDIT-ME" bat file.

Any suggestions? Has anyone encountered this problem.

Thanks in advance

[nitrominer]

Setting up the x64 on another machine, but it is unable to connect, is there something I need to add to the .bat file?

[xolokram]

proportional, if all miners submit 80% of the shares on share target 3fff.. than on share target 7fff.. than your payout is the same

[GoldTiger69]

But we are paid by the sh/m, aren't we?  Or maybe I'm confused?

[xolokram]

pps. i've decreased the share target

sh/m is not important for your "performance"
col/m is (and shouldn't be affected by the share target)

[zvs]

In the last 24 hours I've had a sudden drop of performance. My main miner is an i7-4770K and is only processing 1.5 shares a minute. Yesterday it was doing around 4 shares a minute. Has there been an increase in difficulty or something like that can explain it?

[STATS] 2013-Dec-10 15:41:45 | 130.1 c/m | 1.5 sh/m | VL: 16 (100.0%), RJ: 0 (0.
0%), ST: 0 (0.0%)

yes share target went from 07ffff or somesuch to 03fffff

[sth]

In the last 24 hours I've had a sudden drop of performance. My main miner is an i7-4770K and is only processing 1.5 shares a minute. Yesterday it was doing around 4 shares a minute. Has there been an increase in difficulty or something like that can explain it?

[STATS] 2013-Dec-10 15:41:45 | 130.1 c/m | 1.5 sh/m | VL: 16 (100.0%), RJ: 0 (0.
0%), ST: 0 (0.0%)