[ANN] ptsweb.beeeeer.org - Protoshares mining sub-pool

[noobster]

I was mining for the last few days and it was just fine, however today i get loads of rejects again. about 30%

what is the reason for that? where the pool is located? maybe its because of latency I get like 190 ms... consider opening another pool in europe maybe? or loose miners.

thanks

[arcke]

It depends on our pool finding a block. When a new block is mined by the pool shares getdistributed. Sometimes this happens once per hour, other times once a day. Just an idea of the amount of variance involved.

[pooh20240]

Hello guys  :-*

I new user

When is to change?? i see it 0 through.
http://ptsweb.beeeeer.org/user/Pbaoin4CDyeFs46j7ptBCqtLijcDKWdPux

is correct?

[STATS] 2014-Jan-06 08:34:54 | 205.1 c/m | 3.6 sh/m | VL: 125 (91.9%), RJ: 11 (8.1%), ST: 0 (0.0%)
[WORKER] collision found: 13617335 <-> 29563627 #6472 @ 1389019009 by 1
[MASTER] submitted share -> SHARE
[STATS] 2014-Jan-06 08:35:04 | 205.5 c/m | 3.6 sh/m | VL: 126 (92.0%), RJ: 11 (8.0%), ST: 0 (0.0%)
[WORKER] collision found: 54067803 <-> 65978771 #6584 @ 1389019398 by 6
[MASTER] submitted share -> SHARE
[STATS] 2014-Jan-06 08:35:35 | 205.6 c/m | 3.6 sh/m | VL: 127 (92.0%), RJ: 11 (8.0%), ST: 0 (0.0%)
[WORKER] collision found: 52076300 <-> 53682480 #6618 @ 1389019422 by 6
[MASTER] submitted share -> SHARE
[STATS] 2014-Jan-06 08:35:46 | 205.6 c/m | 3.6 sh/m | VL: 128 (92.1%), RJ: 11 (7.9%), ST: 0 (0.0%)
[WORKER] collision found: 47701659 <-> 65861630 #6624 @ 1389019436 by 20
[MASTER] submitted share -> SHARE
[STATS] 2014-Jan-06 08:35:47 | 205.7 c/m | 3.6 sh/m | VL: 129 (92.1%), RJ: 11 (7.9%), ST: 0 (0.0%)
[WORKER] collision found: 9357112 <-> 31619012 #6682 @ 1389019405 by 13
[MASTER] submitted share -> SHARE
[STATS] 2014-Jan-06 08:36:02 | 205.9 c/m | 3.6 sh/m | VL: 130 (92.2%), RJ: 11 (7.8%), ST: 0 (0.0%)
[WORKER] collision found: 48382392 <-> 51515087 #6688 @ 1389019240 by 16
[MASTER] submitted share -> SHARE
[STATS] 2014-Jan-06 08:36:04 | 205.8 c/m | 3.7 sh/m | VL: 131 (92.3%), RJ: 11 (7.7%), ST: 0 (0.0%)
[WORKER] collision found: 25393119 <-> 29678735 #6774 @ 1389019605 by 21
[MASTER] submitted share -> SHARE
[STATS] 2014-Jan-06 08:36:24 | 206.3 c/m | 3.7 sh/m | VL: 132 (92.3%), RJ: 11 (7.7%), ST: 0 (0.0%)

[FaKo]

 :D

beside the funny things, i could fix the problem my self:
http://dev.thep.lu.se/yat/attachment/ticket/762/exception_ptr_h.patch

editing the exeption_ptr.hpp like in the above link was succesful ;)

thanks for response anyway  ;)

greets FaKo

[5chdn]

Rofl "Fehler: lockerer »throw«-Spezifizierer für »virtual boost::exception_ptr::~exception_ptr()«" ... German translations are so funny in software development!

I've not seen that issue so far, no idea!

[FaKo]

Just need to install EPEL repo for yasm

Code Select Expand

rpm -Uvh http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm

next step:

Code Select Expand

yum install gcc-c++ yasm autoconf automake boost-devel make zlib-devel

ln -s /usr/lib64/libboost_thread-mt.so.5 /usr/lib64/libboost_thread.so

and then, unzip and compile.

or

Code Select Expand


yum install git

git clone https://github.com/thbaumbach/ptsminer
cd ptsminer/src
make -f makefile.unix
./ptsminer <your PTS address> <number of threads>

TO:MrDiscordia
package zlib-devel missing

Really thank you! It works really fine. Thaaaaaaaaaaank you :P

Hey,

i followed these steps exactly but i am getting errors anyway :(
yes, i am under redhat.
these are the errors (in german):

[root@machine src]# make -f makefile.unix.no-chrono
g++ -c -O2  -pthread  -DBOOST_SPIRIT_THREADSAFE -D_FILE_OFFSET_BITS=64 -I/nfs/home/y0057486/cpu_vision-v0.2/ptsminer/src -I/nfs/home/y0057486/cpu_vision-v0.2/ptsminer/src/obj -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2  -o obj/main_poolminer.o main_poolminer.cpp
In file included from /usr/include/boost/thread/future.hpp:12,
                 from /usr/include/boost/thread.hpp:24,
                 from main_poolminer.hpp:6,
                 from main_poolminer.cpp:13:
/usr/include/boost/exception_ptr.hpp:43: Fehler: lockerer »throw«-Spezifizierer für »virtual boost::exception_ptr::~exception_ptr()«
/usr/include/boost/exception/detail/exception_ptr_base.hpp:26: Fehler:   »virtual boost::exception_detail::exception_ptr_base::~exception_ptr_base() throw ()« wird überschrieben
make: *** [obj/main_poolminer.o] Fehler 1

any ideas? :)

[5chdn]

I just join in this pool.

Is there anything wrong as I go to my user page but see no details yet.

it looks good.

you have successfully submitted a share:

Code Select Expand

[MASTER] submitted share -> SHARE

Your reject-rate (RJ) is 0%, therefore every share was accepted!

Code Select Expand

[STATS] 2014-Jan-05 07:55:10 | 101.4 c/m | 1.7 sh/m | VL: 103 (100.0%), RJ: 0 (0.0%), ST: 0 (0.0%)

just wait until a block is found to see stats.

At the rate I am sharing, how much pts can I earn in a day roughly

Thanks!

Time to find a block mining solo: 9.884 months, Turnout: 0.064 PTS/day.

[baoky]

I just join in this pool.

Is there anything wrong as I go to my user page but see no details yet.

[STATS] 2014-Jan-05 07:49:29 | 102.2 c/m | 1.8 sh/m | VL: 98 (100.0%), RJ: 0 (0.0%), ST: 0 (0.0%)
[WORKER] collision found: 65526009 <-> 52238070 #5722 @ 1388926405 by 5
[MASTER] submitted share -> SHARE
[STATS] 2014-Jan-05 07:50:03 | 101.9 c/m | 1.8 sh/m | VL: 99 (100.0%), RJ: 0 (0.0%), ST: 0 (0.0%)
[WORKER] collision found: 42401142 <-> 28747745 #5766 @ 1388926453 by 5
[MASTER] submitted share -> SHARE
[STATS] 2014-Jan-05 07:50:30 | 101.9 c/m | 1.8 sh/m | VL: 100 (100.0%), RJ: 0 (0.0%), ST: 0 (0.0%)
[WORKER] collision found: 16802576 <-> 46264772 #5968 @ 1388926640 by 0
[MASTER] submitted share -> SHARE
[STATS] 2014-Jan-05 07:52:40 | 101.6 c/m | 1.7 sh/m | VL: 101 (100.0%), RJ: 0 (0.0%), ST: 0 (0.0%)
[MASTER] work received - sharetarget: 03ffffffffffffffffffffffffffffffffffffffffffffffffffffffbeefde4d
[MASTER] work received - sharetarget: 03ffffffffffffffffffffffffffffffffffffffffffffffffffffffbeefde4d
[WORKER] collision found: 3508072 <-> 24410417 #6154 @ 1388926499 by 3
[MASTER] submitted share -> SHARE
[STATS] 2014-Jan-05 07:54:45 | 101.2 c/m | 1.7 sh/m | VL: 102 (100.0%), RJ: 0 (0.0%), ST: 0 (0.0%)
[WORKER] collision found: 51764290 <-> 58373558 #6210 @ 1388926533 by 5
[MASTER] submitted share -> SHARE
[STATS] 2014-Jan-05 07:55:10 | 101.4 c/m | 1.7 sh/m | VL: 103 (100.0%), RJ: 0 (0.0%), ST: 0 (0.0%)
[MASTER] work received - sharetarget: 03ffffffffffffffffffffffffffffffffffffffffffffffffffffffbeefde4d


At the rate I am sharing, how much pts can I earn in a day roughly

Thanks!

[5chdn]

i am not sure if i am doing it right?

yea looks good.

you have successfully submitted a share:

Code Select Expand

[MASTER] submitted share -> SHARE

Your reject-rate (RJ) is 0%, therefore every share was accepted!

Code Select Expand

[STATS] 2014-Jan-05 23:18:24 | 141.6 c/m | 2.4 sh/m | VL: 48 (100.0%), RJ: 0 (0.0%), ST: 0 (0.0%)

[enmore]

Hi there.

reat work by the way, Loved the XPM pool, came accross to you from another XPM pool because yours was WAAAYY better!

Any way.
I have just started mining the protoshares and i am not sure if i am doing it right? Such a nooooob question!!

My mining address is PpT7tF3iePtoTSoBxf67w64AFpQXDdA98E

[WORKER] collision found: 28858109 <-> 21561068 #2596 @ 1388924709 by 5
[MASTER] submitted share -> SHARE
[STATS] 2014-Jan-05 23:16:56 | 140.9 c/m | 2.4 sh/m | VL: 44 (100.0%), RJ: 0 (0
0%), ST: 0 (0.0%)
[WORKER] collision found: 63607505 <-> 26363538 #2608 @ 1388924684 by 4
[MASTER] submitted share -> SHARE
[STATS] 2014-Jan-05 23:17:00 | 141.0 c/m | 2.4 sh/m | VL: 45 (100.0%), RJ: 0 (0
0%), ST: 0 (0.0%)
[WORKER] collision found: 25237536 <-> 34950510 #2702 @ 1388924758 by 6
[MASTER] submitted share -> SHARE
[STATS] 2014-Jan-05 23:17:36 | 141.5 c/m | 2.4 sh/m | VL: 46 (100.0%), RJ: 0 (0
0%), ST: 0 (0.0%)
[MASTER] work received - sharetarget: 03fffffffffffffffffffffffffffffffffffffff
ffffffffffffffbeefde4d
[WORKER] collision found: 15120856 <-> 4275851 #2744 @ 1388924277 by 5
[MASTER] submitted share -> SHARE
[STATS] 2014-Jan-05 23:17:49 | 142.1 c/m | 2.4 sh/m | VL: 47 (100.0%), RJ: 0 (0
0%), ST: 0 (0.0%)
[MASTER] work received - sharetarget: 03fffffffffffffffffffffffffffffffffffffff
ffffffffffffffbeefde4d
[WORKER] collision found: 41292389 <-> 39837127 #2818 @ 1388924319 by 7
[MASTER] submitted share -> SHARE
[STATS] 2014-Jan-05 23:18:24 | 141.6 c/m | 2.4 sh/m | VL: 48 (100.0%), RJ: 0 (0
0%), ST: 0 (0.0%)


Is this normal?

Thanks again!

[xolokram]

can you provide us (or PM me) the command line you're running?

[gsm]

********************************************
*** ptsminer - Pts Pool Miner v0.7 RC2 <experimental>
*** by xolokram/TB - www.beeeeer.org - glhf
***
*** press CTRL+C to exit
********************************************
using SSE4
spawning 7 worker thread(s)
[WORKER1[WORKER] Hello, World!0
[WORKER] Hello, World![WORKER
2] Hello, World!
3] Hello, World!
[WORKER4] Hello, World!
[WORKER6] Hello, World!
[WORKER6] GoGoGo!
[WORKER1] GoGoGo!
[WORKER0] GoGoGo!
[WORKER2] GoGoGo![WORKER
[WORKER3] GoGoGo!
4] GoGoGo!
[WORKER5] Hello, World!
[WORKER5] GoGoGo!
connecting to 54.201.26.128:1337
no connection to the server, reconnecting in 10 seconds
connecting to 54.201.26.128:1337
no connection to the server, reconnecting in 10 seconds
connecting to 54.201.26.128:1337
no connection to the server, reconnecting in 10 seconds
connecting to 54.201.26.128:1337
no connection to the server, reconnecting in 10 seconds
connecting to 54.201.26.128:1337
no connection to the server, reconnecting in 10 seconds

look what i get when i run ptsminer How i can change this server ??

[xolokram]

sounds reasonable

[yvg1900]

Great, thanks.

So I decided to use xram4:// because of the protocol is already used for MMC that is not under be^5r domain.

yvg1900

[xolokram]

hi

sorry for the late reply
i'm ok with xram4 or be5r

- xolokram