[ANN] ptsweb.beeeeer.org - Protoshares mining sub-pool

[davidltc]

Hello,

I have a problem (I think...) with ptsminer_v07b_x64

Processor:   AMD Phenom II X6 1090T
Instructions sets   MMX (+), 3DNow! (+), SSE, SSE2, SSE3, SSE4A, x86-64, AMD-V

I tried to use the SSE4 version but when receives first work crashes.

ptsminer_sse4 PqDx4SxApxyN4Ui5A4qyFsR5PKD8wh5yDm 1 27 sse4

********************************************
*** ptsminer - Pts Pool Miner v0.7 RC2 <experimental>
*** by xolokram/TB - www.beeeeer.org - glhf
***
*** press CTRL+C to exit
********************************************
using SSE4
spawning 1 worker thread(s)
[WORKER0] Hello, World!
[WORKER0] GoGoGo!
connecting to 54.201.26.128:1337
[MASTER] work received - sharetarget: 03ffffffffffffffffffffffffffffffffffffffff
ffffffffffffffbeefde4d

Crash!



Only works AMD and SSE4 version with SPHLIB

ptsminer_sse4 PqDx4SxApxyN4Ui5A4qyFsR5PKD8wh5yDm 1 27 sph
ptsminer_amd PqDx4SxApxyN4Ui5A4qyFsR5PKD8wh5yDm 1 27 sph

With my processor, ptsminer_sse4 with sse4 should be work, no?


Thank you!

Sadly, no. Your processor does not support SSE4 but SS4a.

SSE4a: http://www.cpu-world.com/Glossary/S/SSE4a.html
SSE4: http://www.cpu-world.com/Glossary/S/SSE4.html

It looks like SSE4a was a 5-instruction set precursor to SSE4 by AMD ahead of Intels 54-instruction set. You'll have to run with sphlib.

Oh!


Thank you :))

[noobster]

is it somehow possible to modify the miner source to assign 768M of memory per thread?

i have searched through the code and found a snippet:

Code Select Expand

        void mineloop_start() {
                switch (COLLISION_TABLE_BITS) {
                        case 20: mineloop<(1<<20),(0xFFFFFFFF<<(32-(32-20))),shamode>(); break;
                        case 21: mineloop<(1<<21),(0xFFFFFFFF<<(32-(32-21))),shamode>(); break;
                        case 22: mineloop<(1<<22),(0xFFFFFFFF<<(32-(32-22))),shamode>(); break;
                        case 23: mineloop<(1<<23),(0xFFFFFFFF<<(32-(32-23))),shamode>(); break;
                        case 24: mineloop<(1<<24),(0xFFFFFFFF<<(32-(32-24))),shamode>(); break;
                        case 25: mineloop<(1<<25),(0xFFFFFFFF<<(32-(32-25))),shamode>(); break;
                        case 26: mineloop<(1<<26),(0xFFFFFFFF<<(32-(32-26))),shamode>(); break;
                        case 27: mineloop<(1<<27),(0xFFFFFFFF<<(32-(32-27))),shamode>(); break;
                        case 28: mineloop<(1<<28),(0xFFFFFFFF<<(32-(32-28))),shamode>(); break;
                        case 29: mineloop<(1<<29),(0xFFFFFFFF<<(32-(32-29))),shamode>(); break;
                        case 30: mineloop<(1<<30),(0xFFFFFFFF<<(32-(32-30))),shamode>(); break;
                        default: break;
                }
        }

any way to modify this list to contain 768M per thread?

[r05]

Hello,

I have a problem (I think...) with ptsminer_v07b_x64

Processor:   AMD Phenom II X6 1090T
Instructions sets   MMX (+), 3DNow! (+), SSE, SSE2, SSE3, SSE4A, x86-64, AMD-V

I tried to use the SSE4 version but when receives first work crashes.

ptsminer_sse4 PqDx4SxApxyN4Ui5A4qyFsR5PKD8wh5yDm 1 27 sse4

********************************************
*** ptsminer - Pts Pool Miner v0.7 RC2 <experimental>
*** by xolokram/TB - www.beeeeer.org - glhf
***
*** press CTRL+C to exit
********************************************
using SSE4
spawning 1 worker thread(s)
[WORKER0] Hello, World!
[WORKER0] GoGoGo!
connecting to 54.201.26.128:1337
[MASTER] work received - sharetarget: 03ffffffffffffffffffffffffffffffffffffffff
ffffffffffffffbeefde4d

Crash!



Only works AMD and SSE4 version with SPHLIB

ptsminer_sse4 PqDx4SxApxyN4Ui5A4qyFsR5PKD8wh5yDm 1 27 sph
ptsminer_amd PqDx4SxApxyN4Ui5A4qyFsR5PKD8wh5yDm 1 27 sph

With my processor, ptsminer_sse4 with sse4 should be work, no?


Thank you!

Sadly, no. Your processor does not support SSE4 but SS4a.

SSE4a: http://www.cpu-world.com/Glossary/S/SSE4a.html
SSE4: http://www.cpu-world.com/Glossary/S/SSE4.html

It looks like SSE4a was a 5-instruction set precursor to SSE4 by AMD ahead of Intels 54-instruction set. You'll have to run with sphlib.

[AizenSou]

I dont understand all these complaints! This pool made me rich!

Maybe the pool has incredible unluck a last few days. I send 24000 cpm to the pool for one day and only 4 blocks were found. The difficulty is not rising the last few days too. One of the reason is because of ypool.net has grown too big for PTS.

https://coinplorer.com/Charts/Difficulty/PTS -> wednesday? network is growing.

@noobster:
no, i'm currently working on the primecoin pool/miner & website

- xolokram

ps. small pool maintainence incoming!!!! server will be down for a few minutes *done*

I know that the difficulty explodes since 07-01 (maybe because of the new GPU miner). I just test your pool for one day so it's not easy to make some judgements too. I just share my opinion :). Since rpoot.net has more workers than beeer.org, I just have the impression that rpool.net is bigger, but they only find 5 blocks/day. So your pool is still more efficient.
Btw how could I see the total cpm of the pool ?

Thanks.

[xolokram]

I dont understand all these complaints! This pool made me rich!

Maybe the pool has incredible unluck a last few days. I send 24000 cpm to the pool for one day and only 4 blocks were found. The difficulty is not rising the last few days too. One of the reason is because of ypool.net has grown too big for PTS.

https://coinplorer.com/Charts/Difficulty/PTS -> wednesday? network is growing.

@noobster:
no, i'm currently working on the primecoin pool/miner & website atm.

- xolokram

ps. small pool maintainence incoming!!!! server will be down for a few minutes *done*

[noobster]

any progress on fixing current reject rate?

[crouton]

cudapts working well for me, my first cuda app on my new card, nice way to test

GTX 660, 485 c/m with ptsminer running 330 c/m on 15 of 16 cores (dual socket xeon) as well

I think i need to go to 2 instances and numactl them for the cpu miner and squeeze a bit more out , as my 8 core xeon gets 220

Thanks to xolo for the pool and dave for cudapts  :D

[5chdn]

I dont understand all these complaints! This pool made me rich!

Maybe the pool has incredible unluck a last few days. I send 24000 cpm to the pool for one day and only 4 blocks were found. The difficulty is not rising the last few days too. One of the reason is because of ypool.net has grown too big for PTS.

Unluck and luck evens out. I've been mining this pool since November 8th (day 0). Just dont hit F5 every minute.

[davidltc]

Hello,

I have a problem (I think...) with ptsminer_v07b_x64

Processor:   AMD Phenom II X6 1090T
Instructions sets   MMX (+), 3DNow! (+), SSE, SSE2, SSE3, SSE4A, x86-64, AMD-V

I tried to use the SSE4 version but when receives first work crashes.

ptsminer_sse4 PqDx4SxApxyN4Ui5A4qyFsR5PKD8wh5yDm 1 27 sse4

********************************************
*** ptsminer - Pts Pool Miner v0.7 RC2 <experimental>
*** by xolokram/TB - www.beeeeer.org - glhf
***
*** press CTRL+C to exit
********************************************
using SSE4
spawning 1 worker thread(s)
[WORKER0] Hello, World!
[WORKER0] GoGoGo!
connecting to 54.201.26.128:1337
[MASTER] work received - sharetarget: 03ffffffffffffffffffffffffffffffffffffffff
ffffffffffffffbeefde4d

Crash!



Only works AMD and SSE4 version with SPHLIB

ptsminer_sse4 PqDx4SxApxyN4Ui5A4qyFsR5PKD8wh5yDm 1 27 sph
ptsminer_amd PqDx4SxApxyN4Ui5A4qyFsR5PKD8wh5yDm 1 27 sph

With my processor, ptsminer_sse4 with sse4 should be work, no?


Thank you!

[AizenSou]

I dont understand all these complaints! This pool made me rich!

Maybe the pool has incredible unluck a last few days. I send 24000 cpm to the pool for one day and only 4 blocks were found. The difficulty is not rising the last few days too. One of the reason is because of ypool.net has grown too big for PTS.

[5chdn]

I dont understand all these complaints! This pool made me rich!

[soulistyce]

now my blockchain its at 41057 and no coins  :-[

[xolokram]

good point, pool is at 41031 (so they seem to be sync)
coinplorer.com is at 41026 (seems to be ok too; with some delay)

check your local client @soulistyce

[jabbaah]

anyone having pay-out issues ? i got payment marked paid, but 12hrs later its not in my wallet still ...

I'm having payout issues also, said paid on day 7 and didnt get it yet, already did -salvagewallet option and -rescan option,
on https://coinplorer.com/PTS/Transactions/b53f58efb0e853667e175ea2f7f214406447d6e9ee74fe5a801b17c826dcc5a2
transation was made but on
https://coinplorer.com/PTS/Addresses/PZM9sKwWyQxqXee1DWewYCGvx5fxGVKjjA
didnt reach my wallet yet even with full sync

Do we have a split in the coin chain? Just asking... when there is such a big pool running?

My wallet currently says:
"blocks" : 41027

Check yours.

[soulistyce]

anyone having pay-out issues ? i got payment marked paid, but 12hrs later its not in my wallet still ...

I'm having payout issues also, said paid on day 7 and didnt get it yet, already did -salvagewallet option and -rescan option,
on https://coinplorer.com/PTS/Transactions/b53f58efb0e853667e175ea2f7f214406447d6e9ee74fe5a801b17c826dcc5a2
transation was made but on
https://coinplorer.com/PTS/Addresses/PZM9sKwWyQxqXee1DWewYCGvx5fxGVKjjA
didnt reach my wallet yet even with full sync