AMD OpenCL Momentum miner

[NaN]

version should be 13.25.5

If I am correct this should be the fglrx driver of Catalyst 12.9. This is too old

[hipplegrids]

It is one card with 2 GB RAM. I edited the .bat file to:

clpts_x86-64 -u username.workername -p password -t 0

but still having the same problem. It keeps repeating:

Connected to server using x.pushthough(xpt) protocol
The login is configured for and unsupported algorithm.
Make sure you miner login details are correct

[scrazy]

Hi Nan:
The error is cause by v0.2.2 ...

Regards

My mistake... I forgot to change the version string. Maybe the driver is too new or too old (e.g. Catalyst 13.12 works). Do you know the version of the catalyst driver? I do not know how to interpret 2:13.125-0ubuntu0.0.1

version should be 13.25.5

[NaN]

The command is:

clpts_x86-64 -u username.workername -p password -t 0,1

My card does have 2GB RAM

You said that you have a 7770. Is that one card or two? With only one card you have to use
clpts_x86-64 -u username.workername -p password -t 0

[NaN]

Hi Nan:
The error is cause by v0.2.2 ...

Regards

My mistake... I forgot to change the version string. Maybe the driver is too new or too old (e.g. Catalyst 13.12 works). Do you know the version of the catalyst driver? I do not know how to interpret 2:13.125-0ubuntu0.0.1

[hipplegrids]

The command is:

clpts_x86-64 -u username.workername -p password -t 0,1

My card does have 2GB RAM

[scrazy]

@scrazy: Could you use v0.2.2? this is the most recent release.

Hi Nan:
The error is cause by v0.2.2 ...

Regards

[NaN]

@scrazy: Could you use v0.2.2? this is the most recent release.

[NaN]

I have a Radeon HD7770 and am having problems running the miner. The readme file says that "5000 and 6000 HD cards work, but aren't very fast," what about 7000 series?

When I launch the miner, I get the following:
[...]
Any ideas or solutions?

The unroll messages indicate that it is working. but you somehow used the wrong command line arguments. Could you post your command to launch the miner or your .bat-file (username and password may be masked)? But I do not think the miner will run on any 7770 card because it needs more than 1GB GPU RAM. No idea whether your cards have 2GB RAM...

[hipplegrids]

I have a Radeon HD7770 and am having problems running the miner. The readme file says that "5000 and 6000 HD cards work, but aren't very fast," what about 7000 series?

When I launch the miner, I get the following:

Messages during compilation of program for device 'Capeverde'
LOOP UNROOL: pragma unroll (line162)
repeated 4 more times.

Connected to server using x.pushthough(xpt) protocol
The login is configured for and unsupported algorithm.
Make sure you miner login details are correct

Any ideas or solutions?

[scrazy]

Ubuntu 12.04
3x 7970
driver:

Code Select Expand


$ dpkg -l|grep fgl
ii  fglrx-amdcccle-updates                 2:13.125-0ubuntu0.0.1               Catalyst Control Center for the AMD graphics accelerators
ii  fglrx-updates                          2:13.125-0ubuntu0.0.1               Video driver for the AMD graphics accelerators
ii  fglrx-updates-dev                      2:13.125-0ubuntu0.0.1               Video driver for the AMD graphics accelerators (devel files)


Code Select Expand

$ ./clpts -u xxxx.PTS_2 -p x -t 0,1,2 -a 1
*****************************************************************************
** clpts - OpenCL PTS Pool Miner v0.2 (ypool.net only)
** by NaN - based on xptMiner by jh00 (clintar's code v1.1)
** If you like this software, please consider sending tips to: [email protected]
** PTS:  PtLx9kDLTXtR1ae3u7naXLPeGjjHZ1PGoR
** BTC:  1AumJ5uzz1nuER7pBA6Bh4gNusaxhN85rc
** Your donations will encourage further optimization and development
**
** press CTRL+C to exit
*****************************************************************************

Vendor of used platform (#1 / 1): Advanced Micro Devices, Inc.
Name of device #1 / 3 (deviceID 0): Tahiti
Name of device #2 / 3 (deviceID 1): Tahiti
Name of device #3 / 3 (deviceID 2): Tahiti


Fee Percentage:  2.50%. To set, use "-d" flag e.g. "-d 3.5" is 3.5% donation

spawning 3 worker threads


Error during compilation of program for device 'Tahiti':

Internal error: Input OpenCL binary is not for the target!


Please help, thanks!

[emski]

I confirm significant cpm improvements in the range of 15%-30% for HD 7950 (depending on overclocking settings)
I get about 2450 cpm with HD 7950 (clocked at 1100 1400) on 2.2. I was getting 1850 on ver 2.0.

Nice work!

[NaN]

I released a new version with large performance improvements. The syntax of the command line options of v0.1.x has changed and one has to specify the device IDs like in v0.2.x (see README). Furthermore, the command line option -a was introduced to select an algorithm. I guess that -a 0 or -a 2 should be fastest on R9 290(X) and -a 1 or -a 3 should be best for non-R9 290(X) cards.

[crazycoin]

After changing to previous version, I  am getting 7250 col/m.

I have changed memory setting on two cards to 975/1475, but there was no improvement. I am running all 5 workers in same terminal. Is there anything else I could change?

[NaN]

I am getting 6830 col/m on 5x Sapphire 7950 with stock settings. That is ~1370 col/m. I have Celeron with 4Gb Ram.

Does anybody knows, how to tweak performance to get closer to 1800 col/m as some users are reporting.

I am using Ubuntu 13.1 with the latest drivers and miner v0.1.3.

Please use v0.1.2 until the next version is released. This should be fastest on your GPU. I'm working on an update with huge performance gains.