Author Topic: jhProtominer - CPU and collisions/min charts  (Read 71820 times)

0 Members and 1 Guest are viewing this topic.

Offline yvg1900

  • Full Member
  • ***
  • Posts: 198
    • View Profile
  • BitShares: yvg1900
Re: jhProtominer - CPU and collisions/min charts
« Reply #142 on: October 30, 2014, 08:14:39 am »
Missed this thread, probably it is not too late...

Is there still a chance to get output of the miner?

And feel free to PM me if you need urgent answer.
Follow @yvg1900 on Twitter for yam miner updates and support

Offline KardalozColins

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: jhProtominer - CPU and collisions/min charts
« Reply #141 on: September 25, 2014, 11:34:49 pm »
@yvg1900
thank you for ur effort first!
After i upgrade from M7t to M7v,i found it seems like the settings things have bit difference because i cant use it for mining at all.Could u please teach me how to config it and make it work?thanks a lot.

Offline DarkAGeS

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: jhProtominer - CPU and collisions/min charts
« Reply #140 on: May 01, 2014, 12:48:17 pm »
can this miner be used on Freebsd?

Offline yvg1900

  • Full Member
  • ***
  • Posts: 198
    • View Profile
  • BitShares: yvg1900
Re: jhProtominer - CPU and collisions/min charts
« Reply #139 on: March 26, 2014, 09:46:38 pm »
Sooo, I finally got it solved.

Very silly mistake.

./yam --config yam-pts.cfg

you have to include the folder to yam-pts.cfg, for example:

./yam --config yam-yvg1900/linux64-core2/yam-pts.cfg

A "couldn't find the config file" mistake would be very nice for the next version. I hope I could help somebody out.
Anyway, thanks again for your efforts yvg1900, I'm nearly getting 100% improvement with this new version!  +5%

Will consider better error messages for M7o.
Follow @yvg1900 on Twitter for yam miner updates and support

Offline Chartist

  • Jr. Member
  • **
  • Posts: 28
    • View Profile
Re: jhProtominer - CPU and collisions/min charts
« Reply #138 on: March 24, 2014, 07:37:36 am »
Noob question: I'm mining with an i7 4770k. When I set the number of cores to 4 I get roughly 150 collisions/m. When I set the cores to 8 I get about 130. Is that the number per core, or the total number of collisions? Trying to figure out which way is more efficient. Thanks.
@BTC_Analyst
PTS - PfBmz147Mt6aU3tZ38PyFLMT8P1oxy8NVz
MMC - MRxPyEDRbQFcEpeTdv2B6oXUKWTxeFqWsq

Offline mrdd

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: jhProtominer - CPU and collisions/min charts
« Reply #137 on: February 20, 2014, 05:04:50 pm »
Sooo, I finally got it solved.

Very silly mistake.

./yam --config yam-pts.cfg

you have to include the folder to yam-pts.cfg, for example:

./yam --config yam-yvg1900/linux64-core2/yam-pts.cfg

A "couldn't find the config file" mistake would be very nice for the next version. I hope I could help somebody out.
Anyway, thanks again for your efforts yvg1900, I'm nearly getting 100% improvement with this new version!  +5%

Offline mrdd

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: jhProtominer - CPU and collisions/min charts
« Reply #136 on: February 20, 2014, 11:50:21 am »
Thanks for the answer! :)

My config file looks like this:
threads = 8
mining-params = pts:av=0&m=512
mine = xpt2h://yvg1900.pts_1:x@mining.ypool.net:10034:8080:8081:8082:8083:8084:8085:8086:8087/pts
mine = xpt2://Pm9LE8UxTo5TQZdfH2RqcbNfCBiK1KWCtV:x@112.124.13.238:28988/pts
mine = xram4://Pm9LE8UxTo5TQZdfH2RqcbNfCBiK1KWCtV@ptsmine.beeeeer.org:1337/pts
#proxy = socks4a://127.0.0.1:9150
compact-stats = 1
print-timestamps = 0

(yes, I kept your URIs, just to try if it is working)

when I ran it with:  ./yam --config yam-pts.cfg
It tells me: Error: At least one mining target shall be defined with --mine parameter
(shouldn't it take the first parameter from the config?

since this doesn't work, I tried: ./yam --config yam-pts.cfg --mine xpt2h://yvg1900.pts_1:x@mining.ypool.net:10034:8080:8081:8082:8083:8084:8085:8086:8087/pts

and it tells me:
Miner version: yam M7m-linux64-core2/yvg1900
Checking target [xram4://Pm9LE8UxTo5TQZdfH2RqcbNfCBiK1KWCtV@ptsmine.beeeeer.org:1337/pts]...
Target OK
Error: boost::bad_any_cast: failed conversion using boost::any_cast

Maybe I am doing somehting very basic wrong, but I'm just not able to get it to work.

Thank you again for the help!

Offline yvg1900

  • Full Member
  • ***
  • Posts: 198
    • View Profile
  • BitShares: yvg1900
Re: jhProtominer - CPU and collisions/min charts
« Reply #135 on: February 20, 2014, 01:07:49 am »
You definitely have some minor mistake/typo in yam config - post it here so we can check it out.
Follow @yvg1900 on Twitter for yam miner updates and support

Offline mrdd

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: jhProtominer - CPU and collisions/min charts
« Reply #134 on: February 20, 2014, 12:18:21 am »
@yvg1900:

First of all: thanks a lot for all your efforts!

I'm currently using v1.0e Core2 (512mb) on Centos 6.5 x64 and it's working great! Getting 130 cpm with 2xXeon L5420.
Sadly I can't use the new version of yam. Everytime I try to start it, it tells me "Error: boost::bad_any_cast: failed conversion using boost::any_cast" after "Target OK".

It has to be related to something you changed to the code recently? Anything that can be done to solve the problem?
Thank you again

Offline fuckingegg

  • Jr. Member
  • **
  • Posts: 24
    • View Profile
Re: jhProtominer - CPU and collisions/min charts
« Reply #133 on: January 10, 2014, 12:37:17 pm »
excellent

Offline yvg1900

  • Full Member
  • ***
  • Posts: 198
    • View Profile
  • BitShares: yvg1900
Re: jhProtominer - CPU and collisions/min charts
« Reply #132 on: January 06, 2014, 07:41:49 pm »
I think so, I believe there are tools to install any command line app as a service.

Btw, I can not advise from the top of the head which exactly tool shall be used, but I am sure it is possible.

yvg1900
Follow @yvg1900 on Twitter for yam miner updates and support

Offline HerrHeimlich

  • Newbie
  • *
  • Posts: 9
    • View Profile
Re: jhProtominer - CPU and collisions/min charts
« Reply #131 on: January 06, 2014, 07:36:24 pm »
@yvg1900: one question: do you think it is possible to install yam as a service under windows?

Offline SpeedDemon13

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: jhProtominer - CPU and collisions/min charts
« Reply #130 on: January 06, 2014, 07:30:55 am »
Wow, a FX8350 does that well in cpm? Even better than a i7? Or is it the ghz and cores have the biggest impact on cpm?

Offline HerrHeimlich

  • Newbie
  • *
  • Posts: 9
    • View Profile
Re: jhProtominer - CPU and collisions/min charts
« Reply #129 on: January 04, 2014, 10:39:34 pm »
@yvg1900
You are right. With a stable connection the finetuning came to an end and to a result. Now it is running fine. Thanks for the help.

Offline HerrHeimlich

  • Newbie
  • *
  • Posts: 9
    • View Profile
Re: jhProtominer - CPU and collisions/min charts
« Reply #128 on: January 04, 2014, 09:23:49 pm »
Thanks for the information. I am just testing it.