Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - bryantism

Pages: [1]
1
BitShares PTS / Re: [ANN] ypool.net - Fast PTS pool
« on: January 02, 2014, 06:18:42 am »
install glibc will require


checking installed Linux kernel header files... TOO OLD!
configure: error: GNU libc requires kernel header files from
Linux 2.6.19 or later to be installed before configuring.
The kernel header files are found usually in /usr/include/asm and
/usr/include/linux; make sure these directories use files from
Linux 2.6.19 or later.  This check uses <linux/version.h>, so
make sure that file was built correctly when installing the kernel header
files.  To use kernel headers not from /usr/include/linux, use the
configure option --with-headers.


2
BitShares PTS / Re: [ANN] ypool.net - Fast PTS pool
« on: January 02, 2014, 06:10:14 am »
it seems glibc 2.17need ..... but when i install 2.17, more wired problem.....

3
BitShares PTS / Re: [ANN] ypool.net - Fast PTS pool
« on: January 02, 2014, 05:24:41 am »
Quote from: bryantism on January 02, 2014, 04:40:02 am
Quote from: yvg1900 on January 01, 2014, 05:20:35 pm
Bryantism,

After some evaluation of possibilities running yam with 2.6.9 kernels, only reasonable opportunity I found is that I build dynamically linked elf that will support glibc 2.7 and you have to build alternate glibc right on your system and run yam with that glibc using LD_LIBRARY_PATH .

Glibc shipped with that generation of RedHat distros is completely outdated and buggy when it comes to modern memory management.

If you feel you can take care of building secondary glibc on your system, that will probably involve updating GCC and binutils, then I can post dynamically linked version somewhere. If not I doubt it makes sense to support that version.

Follow @yvg1900 on Twitter to get updates on performance mining software

i installed glibc, but it's still :

./yam: /***/lib/libc.so.6: version `GLIBC_2.14' not found (required by ./yam)
./yam: /***/lib/libc.so.6: version `GLIBC_2.8' not found (required by ./yam)
./yam: /***/lib/libc.so.6: version `GLIBC_2.9' not found (required by ./yam)
./yam: /***/libc.so.6: version `GLIBC_2.17' not found (required by ./yam)
./yam: /usr/lib64/libstdc++.so.6: version `GLIBCXX_3.4.15' not found (required by ./yam)
./yam: /usr/lib64/libstdc++.so.6: version `GLIBCXX_3.4.11' not found (required by ./yam)
./yam: /usr/lib64/libstdc++.so.6: version `GLIBCXX_3.4.9' not found (required by ./yam)

are all these should be installed ?

i have ldd this program.
yam: /lib64/tls/libc.so.6: version `GLIBC_2.14' not found (required by ./yam)
./yam: /lib64/tls/libc.so.6: version `GLIBC_2.8' not found (required by ./yam)
./yam: /lib64/tls/libc.so.6: version `GLIBC_2.9' not found (required by ./yam)
./yam: /lib64/tls/libc.so.6: version `GLIBC_2.7' not found (required by ./yam)
./yam: /lib64/tls/libc.so.6: version `GLIBC_2.17' not found (required by ./yam)
.....
installed 2.7
all glibc 2.8 , 2.9 2.17 needed??

4
BitShares PTS / Re: [ANN] ypool.net - Fast PTS pool
« on: January 02, 2014, 04:40:02 am »
Quote from: yvg1900 on January 01, 2014, 05:20:35 pm
Bryantism,

After some evaluation of possibilities running yam with 2.6.9 kernels, only reasonable opportunity I found is that I build dynamically linked elf that will support glibc 2.7 and you have to build alternate glibc right on your system and run yam with that glibc using LD_LIBRARY_PATH .

Glibc shipped with that generation of RedHat distros is completely outdated and buggy when it comes to modern memory management.

If you feel you can take care of building secondary glibc on your system, that will probably involve updating GCC and binutils, then I can post dynamically linked version somewhere. If not I doubt it makes sense to support that version.

Follow @yvg1900 on Twitter to get updates on performance mining software

i installed glibc, but it's still :

./yam: /***/lib/libc.so.6: version `GLIBC_2.14' not found (required by ./yam)
./yam: /***/lib/libc.so.6: version `GLIBC_2.8' not found (required by ./yam)
./yam: /***/lib/libc.so.6: version `GLIBC_2.9' not found (required by ./yam)
./yam: /***/libc.so.6: version `GLIBC_2.17' not found (required by ./yam)
./yam: /usr/lib64/libstdc++.so.6: version `GLIBCXX_3.4.15' not found (required by ./yam)
./yam: /usr/lib64/libstdc++.so.6: version `GLIBCXX_3.4.11' not found (required by ./yam)
./yam: /usr/lib64/libstdc++.so.6: version `GLIBCXX_3.4.9' not found (required by ./yam)

are all these should be installed ?

5
BitShares PTS / Re: [ANN] ypool.net - Fast PTS pool
« on: January 01, 2014, 08:07:57 pm »
ok  i think i can do it

6
BitShares PTS / Re: [ANN] ypool.net - Fast PTS pool
« on: January 01, 2014, 12:51:31 pm »
Quote from: yvg1900 on January 01, 2014, 12:01:08 pm
Guys,

How many machines are running old kernels? I am deciding now if adding old kernels to the supported list is worth, as well as other OSes like FreeBSD.

Follow @yvg1900 on Twitter to get updates on performance mining software


hi yvg, could you open source it?

7
BitShares PTS / Re: [ANN] ypool.net - Fast PTS pool
« on: January 01, 2014, 12:47:33 pm »
Quote from: yvg1900 on January 01, 2014, 12:01:08 pm
Guys,

How many machines are running old kernels? I am deciding now if adding old kernels to the supported list is worth, as well as other OSes like FreeBSD.

Follow @yvg1900 on Twitter to get updates on performance mining software

for me, there are more than 50+

8
BitShares PTS / Re: [ANN] ypool.net - Fast PTS pool
« on: December 31, 2013, 09:44:41 pm »
Quote from: yvg1900 on December 31, 2013, 09:30:07 pm
Post your name -a and I will look what I can do. Unfortunately, some essential memory management functionality is missing in older kernels, so I decided to drop that part of support because of they are very rare nowadays and supporting them is not worth the efforts.

Also post your exact distro identification, maybe we can find a way.

Follow @yvg1900 on Twitter to get updates on performance mining software
2.6.9_5-9-0-0 #1 SMP Wed Jun 23 14:03:19 CST 2010 x86_64 x86_64 x86_64 GNU/Linux
Red Hat Enterprise Linux AS release 4 (Nahant Update 3)

/proc/cpuinfo:

processor       : 11
vendor_id       : GenuineIntel
cpu family      : 6
model           : 12
model name      : Intel(R) Xeon(R) CPU           E5645  @ 2.40GHz
stepping        : 2
cpu MHz         : 2400.180
cache size      : 256 KB
physical id     : 1
siblings        : 16
core id         : 26
cpu cores       : 16
fpu             : yes
fpu_exception   : yes
cpuid level     : 11
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm pni monitor ds_cpl est tm2 cx16 xtpr
bogomips        : 4800.22
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management:



if you could help me , thanks very much !

9
BitShares PTS / Re: [ANN] ypool.net - Fast PTS pool
« on: December 31, 2013, 09:25:19 pm »
Quote from: yvg1900 on December 31, 2013, 02:55:31 pm
Enjoy :-)

Follow @yvg1900 on Twitter to get updates on performance mining software

hi yvg of the linux version it shows my kernel is too old .core dumped'  some reason i can not upgrade the kernel could you help me？

10
BitShares PTS / Re: [ANN] ypool.net - Fast PTS pool
« on: December 31, 2013, 02:23:18 pm »
when i use optimized jhprotominer in linux,   it shows the linux kernel is too old, core dumped ? who can help me solved it or give me the source code ?

Pages: [1]

Page created in 0.203 seconds with 24 queries.