Quote from: reorder on December 30, 2013, 03:42:30 PM
Thank you, so this is the problem - my miner uses platform 0 (hardcoded) to find devices, and in your case it is Intel SDK which of course only has Intel CPUs. I will fix that. Meanwhile you could try uninstalling it (unless you do OpenCL development on Intel of course :) )

Deleted Intel SDK. Now works.

Yes i do :
http://gyazo.com/af57a52c9657aadfba745b47ce16e8d6

Quote from: reorder on December 30, 2013, 03:30:55 PM

Quote from: dima1236 on December 30, 2013, 03:29:58 PM
13.12 is the same, downgrading isn't an option for me, since i have 280x cards

Quote from: reorder on December 30, 2013, 03:13:55 PM

Quote from: Banch on December 30, 2013, 03:06:44 PM
There were no error message when crashed. Just noticed that clocks went down and only rebooting helps.

Using Catalyst 13.6. Any way to restart gpu / drivers after crash without rebooting whole PC?

Not that I know of, even in Linux when it hangs, it hangs (but I believe I have all code problems causing hangups fixed to this moment). Could you please try upgrading Catalyst? 13.x series upto 13.12 have various problems.

One more question, do you have GPU_USE_SYNC_OBJECTS set?

Quote from: agran on December 30, 2013, 03:37:55 PM

Quote from: reorder on December 30, 2013, 03:29:47 PM
Do you perhaps have other OpenCL SDKs installed besides AMD one? I am looking for a way to find out quiclky, not sure if 'cgminer -n' lists them.

Code Select Expand

C:\Users\Олег\Desktop\cgminer-3.7.2-windows>cgminer -n
[2013-12-30 19:36:02] CL Platform 0 vendor: Intel(R) Corporation

[2013-12-30 19:36:02] CL Platform 0 name: Intel(R) OpenCL
[2013-12-30 19:36:02] CL Platform 0 version: OpenCL 1.2
[2013-12-30 19:36:02] Error -1: Getting Device IDs (num)
[2013-12-30 19:36:02] CL Platform 1 vendor: Advanced Micro Devices, Inc.

[2013-12-30 19:36:02] CL Platform 1 name: AMD Accelerated Parallel Processing

[2013-12-30 19:36:02] CL Platform 1 version: OpenCL 1.2 AMD-APP (1348.4)

[2013-12-30 19:36:02] Platform 1 devices: 2
[2013-12-30 19:36:02]  0       Tahiti
[2013-12-30 19:36:02]  1       Tahiti
[2013-12-30 19:36:02] GPU 0 AMD Radeon R9 200 Series hardware monitoring enable
d
[2013-12-30 19:36:02] GPU 1 AMD Radeon R9 200 Series hardware monitoring enable
d
[2013-12-30 19:36:02] 2 GPU devices max detected
[2013-12-30 19:36:02] USB all: found 13 devices - listing known devices

[2013-12-30 19:36:02] No known USB devices

C:\Users\Олег\Desktop\cgminer-3.7.2-windows>


Thank you, so this is the problem - my miner uses platform 0 (hardcoded) to find devices, and in your case it is Intel SDK which of course only has Intel CPUs. I will fix that. Meanwhile you could try uninstalling it (unless you do OpenCL development on Intel of course :) )

Quote from: reorder on December 30, 2013, 03:29:47 PM
Do you perhaps have other OpenCL SDKs installed besides AMD one? I am looking for a way to find out quiclky, not sure if 'cgminer -n' lists them.

C:\Users\Олег\Desktop\cgminer-3.7.2-windows>cgminer -n
[2013-12-30 19:36:02] CL Platform 0 vendor: Intel(R) Corporation

[2013-12-30 19:36:02] CL Platform 0 name: Intel(R) OpenCL
[2013-12-30 19:36:02] CL Platform 0 version: OpenCL 1.2
[2013-12-30 19:36:02] Error -1: Getting Device IDs (num)
[2013-12-30 19:36:02] CL Platform 1 vendor: Advanced Micro Devices, Inc.

[2013-12-30 19:36:02] CL Platform 1 name: AMD Accelerated Parallel Processing

[2013-12-30 19:36:02] CL Platform 1 version: OpenCL 1.2 AMD-APP (1348.4)

[2013-12-30 19:36:02] Platform 1 devices: 2
[2013-12-30 19:36:02]  0       Tahiti
[2013-12-30 19:36:02]  1       Tahiti
[2013-12-30 19:36:02] GPU 0 AMD Radeon R9 200 Series hardware monitoring enable
d
[2013-12-30 19:36:02] GPU 1 AMD Radeon R9 200 Series hardware monitoring enable
d
[2013-12-30 19:36:02] 2 GPU devices max detected
[2013-12-30 19:36:02] USB all: found 13 devices - listing known devices

[2013-12-30 19:36:02] No known USB devices

C:\Users\Олег\Desktop\cgminer-3.7.2-windows>


Quote from: dima1236 on December 30, 2013, 03:29:58 PM
13.12 is the same, downgrading isn't an option for me, since i have 280x cards

Quote from: reorder on December 30, 2013, 03:13:55 PM

Quote from: Banch on December 30, 2013, 03:06:44 PM
There were no error message when crashed. Just noticed that clocks went down and only rebooting helps.

Using Catalyst 13.6. Any way to restart gpu / drivers after crash without rebooting whole PC?

Not that I know of, even in Linux when it hangs, it hangs (but I believe I have all code problems causing hangups fixed to this moment). Could you please try upgrading Catalyst? 13.x series upto 13.12 have various problems.

One more question, do you have GPU_USE_SYNC_OBJECTS set?

13.12 is the same, downgrading isn't an option for me, since i have 280x cards

Quote from: reorder on December 30, 2013, 03:13:55 PM

Quote from: Banch on December 30, 2013, 03:06:44 PM
There were no error message when crashed. Just noticed that clocks went down and only rebooting helps.

Using Catalyst 13.6. Any way to restart gpu / drivers after crash without rebooting whole PC?

Not that I know of, even in Linux when it hangs, it hangs (but I believe I have all code problems causing hangups fixed to this moment). Could you please try upgrading Catalyst? 13.x series upto 13.12 have various problems.

Quote from: agran on December 30, 2013, 03:21:50 PM
Windows 8 64. Setup APP SDK 32 and 64, installed the latest version Catalist, Nothing helps. Miner on a computer with two video cards do not see the card.

Do you perhaps have other OpenCL SDKs installed besides AMD one? I am looking for a way to find out quiclky, not sure if 'cgminer -n' lists them.

Quote from: Banch on December 30, 2013, 03:06:44 PM
There were no error message when crashed. Just noticed that clocks went down and only rebooting helps.

Using Catalyst 13.6. Any way to restart gpu / drivers after crash without rebooting whole PC?

I'm not restarting my PC every time it crashes, just stop and restart the miner and it works fine ....

Windows 8 64. Setup APP SDK 32 and 64, installed the latest version Catalist, Nothing helps. Miner on a computer with two video cards do not see the card.

Quote from: agran on December 30, 2013, 03:11:00 PM
I also have a driver crash after 10 minutes.

Would you pelase share how did you make it to find your cards? Running as administrator, or something else?

Quote from: sandor111 on December 30, 2013, 03:12:16 PM
anyone running 280x, 290, 290x can you please post your stats?
i am getting 17h/m on 290x not sure if it's normal

On sapphire 280X I get around 19.5 hpm and
gigabyte 280X around 17.8 hpm

http://gyazo.com/e71d026d9f4bcb4bd6d00df18ed577db
Updating to latest didn't help , trying to downgrade now

Quote from: reorder on December 30, 2013, 02:58:48 PM

Quote from: dima1236 on December 30, 2013, 02:51:46 PM
http://gyazo.com/0ef49688413755280533e3f0110ecf51

that's the error that i get, how can i fix this ?

What version of Catalyst do you run? I'd suggest either upgrading to latest or downgrading to 12.10 (the bug I am struggling with is this one: http://devgurus.amd.com/message/1288143#1288143)

Quote from: Banch on December 30, 2013, 03:06:44 PM
There were no error message when crashed. Just noticed that clocks went down and only rebooting helps.

Using Catalyst 13.6. Any way to restart gpu / drivers after crash without rebooting whole PC?

Not that I know of, even in Linux when it hangs, it hangs (but I believe I have all code problems causing hangups fixed to this moment). Could you please try upgrading Catalyst? 13.x series upto 13.12 have various problems.

anyone running 280x, 290, 290x can you please post your stats?
i am getting 17h/m on 290x not sure if it's normal

I also have a driver crash after 10 minutes.