is the windows miner "stable"?  I've been getting a crash after about 5mins or so.  Even after applying the registry fix. 

windows 8.1
AMD 7970

if that helps at all lol

Linux miner is now updated too, update fixes starting on 2G cards.

FWIW, I consistently get slightly higher results for all coins in Linux (same frequencies), but maybe it is just me and 7870 :)

Quote from: reorder on December 31, 2013, 12:36:20 PM

Quote from: brko on December 31, 2013, 12:34:31 PM

Quote from: reorder on December 31, 2013, 12:27:44 PM

Quote from: brko on December 31, 2013, 12:24:59 PM

Quote from: reorder on December 31, 2013, 11:56:16 AM
Guys,

I have updated windows miner. Now it detects (does its best to) AMD OpenCL platform and uses it, and has some memory config detection improvements. Please redownload from the same place and report any further problems you may encounter.

With new miner, my r9 290 GPU usage stays at 100% longer,  before it was constantly falling to 0, now it falls to 0 every 30-45 sec.(and then back to 100)

When i was changing GPU_MAX_HEAP_SIZE before, when i runed your miner the 280x memory value was also changing now its:

280x: 3059744768
290:   3221225472

Is there maybe a way to get the 280x to the 3221225472 mem?

Did your hashrate also increase with the increased load?

Regarding displayed memory, it makes no real difference, as soon as the miner detects >2G, it uses a faster 1-pass algorithm, and that's to it.

Yes, it did a bit, now it is:

280x: 17.2hpm 19.2wpm --> wpm was 18
290:   20.7hpm 19.3wpm --> wpm was 18

280x is fluctuating between 85-99.

So, I guess, you have nothing to comlain about :) Just keep an eye on temperatures/fan speed, though.

Yep, thanks.:)

Here is the picture of temps and gpu load:

http://i.imgur.com/Y7tnnsK.jpg

Quote from: marcthespot on December 31, 2013, 12:37:29 PM
reorder any reason why an amd HD 5800 series gpu w/ 2GB would not work?  I run the batch and it just gives me rejects..

I can imagine some architecture-related reasons, but it would be a pure speculation, as I only have access to 7xxx and higher to test.

Quote from: marcthespot on December 31, 2013, 12:35:03 PM
reorder seems to be running here, no real obvious improvements

The fix is for people who had troubles starting the miner, if you had it already running, basically nothing is changed.

reorder any reason why an amd HD 5800 series gpu w/ 2GB would not work?  I run the batch and it just gives me rejects..

Quote from: brko on December 31, 2013, 12:34:31 PM

Quote from: reorder on December 31, 2013, 12:27:44 PM

Quote from: brko on December 31, 2013, 12:24:59 PM

Quote from: reorder on December 31, 2013, 11:56:16 AM
Guys,

I have updated windows miner. Now it detects (does its best to) AMD OpenCL platform and uses it, and has some memory config detection improvements. Please redownload from the same place and report any further problems you may encounter.

With new miner, my r9 290 GPU usage stays at 100% longer,  before it was constantly falling to 0, now it falls to 0 every 30-45 sec.(and then back to 100)

When i was changing GPU_MAX_HEAP_SIZE before, when i runed your miner the 280x memory value was also changing now its:

280x: 3059744768
290:   3221225472

Is there maybe a way to get the 280x to the 3221225472 mem?

Did your hashrate also increase with the increased load?

Regarding displayed memory, it makes no real difference, as soon as the miner detects >2G, it uses a faster 1-pass algorithm, and that's to it.

Yes, it did a bit, now it is:

280x: 17.2hpm 19.2wpm --> wpm was 18
290:   20.7hpm 19.3wpm --> wpm was 18

280x is fluctuating between 85-99.

So, I guess, you have nothing to comlain about :) Just keep an eye on temperatures/fan speed, though.

reorder seems to be running here, no real obvious improvements

Quote from: reorder on December 31, 2013, 12:27:44 PM

Quote from: brko on December 31, 2013, 12:24:59 PM

Quote from: reorder on December 31, 2013, 11:56:16 AM
Guys,

I have updated windows miner. Now it detects (does its best to) AMD OpenCL platform and uses it, and has some memory config detection improvements. Please redownload from the same place and report any further problems you may encounter.

With new miner, my r9 290 GPU usage stays at 100% longer,  before it was constantly falling to 0, now it falls to 0 every 30-45 sec.(and then back to 100)

When i was changing GPU_MAX_HEAP_SIZE before, when i runed your miner the 280x memory value was also changing now its:

280x: 3059744768
290:   3221225472

Is there maybe a way to get the 280x to the 3221225472 mem?

Did your hashrate also increase with the increased load?

Regarding displayed memory, it makes no real difference, as soon as the miner detects >2G, it uses a faster 1-pass algorithm, and that's to it.

Yes, it did a bit, now it is:

280x: 17.2hpm 19.2wpm --> wpm was 18
290:   20.7hpm 19.3wpm --> wpm was 18

280x is fluctuating between 85-99 GPU usage.

Quote from: marcthespot on December 31, 2013, 12:26:03 PM

Quote from: reorder on December 31, 2013, 11:56:16 AM
Guys,

I have updated windows miner. Now it detects (does its best to) AMD OpenCL platform and uses it, and has some memory config detection improvements. Please redownload from the same place and report any further problems you may encounter.

reorder it appears the same version of the windows gpu miner is still on mmc.1gh.com did you update it there?

I have updated it for real, updated miner zipfile must be 6129065 bytes in size, please check if it is in your case.

Quote from: brko on December 31, 2013, 12:24:59 PM

Quote from: reorder on December 31, 2013, 11:56:16 AM
Guys,

I have updated windows miner. Now it detects (does its best to) AMD OpenCL platform and uses it, and has some memory config detection improvements. Please redownload from the same place and report any further problems you may encounter.

With new miner, my r9 290 GPU usage stays at 100% longer,  before it was constantly falling to 0, now it falls to 0 every 30-45 sec.(and then back to 100)

When i was changing GPU_MAX_HEAP_SIZE before, when i runed your miner the 280x memory value was also changing now its:

280x: 3059744768
290:   3221225472

Is there maybe a way to get the 280x to the 3221225472 mem?

Did your hashrate also increase with the increased load?

Regarding displayed memory, it makes no real difference, as soon as the miner detects >2G, it uses a faster 1-pass algorithm, and that's to it.

Quote from: reorder on December 31, 2013, 11:56:16 AM
Guys,

I have updated windows miner. Now it detects (does its best to) AMD OpenCL platform and uses it, and has some memory config detection improvements. Please redownload from the same place and report any further problems you may encounter.

yup it detects my tahiti properly now, thanks!!

Quote from: reorder on December 31, 2013, 11:56:16 AM
Guys,

I have updated windows miner. Now it detects (does its best to) AMD OpenCL platform and uses it, and has some memory config detection improvements. Please redownload from the same place and report any further problems you may encounter.

reorder it appears the same version of the windows gpu miner is still on mmc.1gh.com did you update it there?

Quote from: reorder on December 31, 2013, 11:56:16 AM
Guys,

I have updated windows miner. Now it detects (does its best to) AMD OpenCL platform and uses it, and has some memory config detection improvements. Please redownload from the same place and report any further problems you may encounter.

With new miner, my r9 290 GPU usage stays at 100% longer,  before it was constantly falling to 0, now it falls to 0 every 30-45 sec.(and then back to 100)

When i was changing GPU_MAX_HEAP_SIZE before, when i runed your miner the 280x memory value was also changing now its:

280x: 3059744768
290:   3221225472

Is there maybe a way to get the 280x to the 3221225472 mem?

Quote from: reorder on December 31, 2013, 11:56:16 AM
Guys,

I have updated windows miner. Now it detects (does its best to) AMD OpenCL platform and uses it, and has some memory config detection improvements. Please redownload from the same place and report any further problems you may encounter.

Will do. Thanks a lot.:)