Quote from: emailtooaj on February 23, 2014, 04:18:37 PM
Thanks NoVaMiner for the reply.
I'm also using NaN's clpts v 0.2.2
Would you mind PM'ing me you batch settings (minus your username)? So I can see how yours set up.
I currently have the 7950's at 1025/1500, 7850 at 975/1300 and the r7's at 875/1000
I would think I could get these over the 6k c/m mark?

The only option I have set is "-t 0,0".  I fiddled with overclocking the processor and memory, but only got minor improvements.  The only setting I change on the card is to run the fan up to 80%.

With the 28th fast approaching, will ypool do a payout if less than a share is earned? I know the schedule is normal only when a full share is earned, but it would be nice this was done once before the 28th.

Thanks NoVaMiner for the reply.
I'm also using NaN's clpts v 0.2.2
Would you mind PM'ing me you batch settings (minus your username)? So I can see how yours set up.
I currently have the 7950's at 1025/1500, 7850 at 975/1300 and the r7's at 875/1000
I would think I could get these over the 6k c/m mark?

Quote from: emailtooaj on February 23, 2014, 06:07:55 AM
Hey all!
I just recently started mining on ypool.
Just wanted to get some feed back please....
I'm averaging about 5,480 collisions/min. I have 2-HD7950's, 1- HD7850 and 2- R7 240's running.
Is this a good collisions/min. for this set up? Or should I be getting higher rates?
I averaged 1.7 Mh/s with other scrypt miners.
I thought I read some where that collisions/min should read like kh/s. Is this tru?
Thanks for any feedback!

Depends on the client.  With NaN's clpts I'm getting ~4325c/m with a single R9-290XOC (mild OC 1100/1400)

Hey all!
I just recently started mining on ypool.
Just wanted to get some feed back please....
I'm averaging about 5,480 collisions/min. I have 2-HD7950's, 1- HD7850 and 2- R7 240's running.
Is this a good collisions/min. for this set up? Or should I be getting higher rates?
I averaged 1.7 Mh/s with other scrypt miners.
I thought I read some where that collisions/min should read like kh/s. Is this tru?
Thanks for any feedback!

Quote from: lir111 on February 22, 2014, 09:02:09 PM

Quote from: mrdd on February 22, 2014, 01:49:05 PM

Quote from: krpetrov on February 22, 2014, 11:13:52 AM
Tomorrow difficulty rises to - Estimated difficulty: 0.03174441 (184.06%) !!!

How do you know? Is this confirmed?
Time to change pool I guess...

yupp go to beer difficulty will be less  ;)

Difficulty is not pool specific, it's protocol specific. You can't run from it.

Quote from: mrdd on February 22, 2014, 01:49:05 PM

Quote from: krpetrov on February 22, 2014, 11:13:52 AM
Tomorrow difficulty rises to - Estimated difficulty: 0.03174441 (184.06%) !!!

How do you know? Is this confirmed?
Time to change pool I guess...

yupp go to beer difficulty will be less  ;)

Calculations in here - http://mrx.im/pts.php

Quote from: krpetrov on February 22, 2014, 11:13:52 AM
Tomorrow difficulty rises to - Estimated difficulty: 0.03174441 (184.06%) !!!

How do you know? Is this confirmed?
Time to change pool I guess...

Tomorrow difficulty rises to - Estimated difficulty: 0.03174441 (184.06%) !!!

It suddenly became harder to mine on ypool due to the increase in number of workers. :'(
Can anyone suggest a good pool?

I decided to move back to beeeeer from ypool yesterday, and following Luigi's (a mod) advice, set my auto payout to 0 to let all unconfirmed shares roll over without getting a payout at 1.000 and thus leaving fractional stranded PTS.  This morning all my shares had accumulated so I set the payout back to 1.  No payout after 4 hours or so.  Is there something I am missing on the site to request a payout, other than the auto setting?

Update:  the problem seems to have been that setting the auto payout back to 1 didn't "take", probably due to the website issues.  I was just able to get back into the site again, saw auto payout not set, set it to 1, and got the payout a couple minutes later.

Ypool seems to be overloaded and very unstable. Smart move is to switch to another pool.

my AVAST says after blocking the site in firefox:

Infektion blockiert
URL: http://ypool.net/
Infektion: URL:Mal

the pool is running fine with regularly payments, but the website...

Avast indeed. But had it already back when I could access the site without a problem.