Could you execute ./clpts -o 0,6 Pezz4JUPfpAFTSSwWgp1TMpCcS1YvEqVsn -u ozzy.PTS_1 -p x -t 0,0,1,1,2,2 -a 2 directly in your bash (first switch to the folder of the miner)? I need the output of the miner otherwise I won't be able to solve your problem.

Quote from: NaN on March 31, 2014, 06:47:15 PM
Could you post the output of the miner and your config?

i do as what it says here:
http://www.overclock.net/t/1462655/guide-nvidia-amd-pts-gpu-mining/3000_100#post_21775115

#!/bin/bash

./clpts -o 0,6 Pezz4JUPfpAFTSSwWgp1TMpCcS1YvEqVsn -u ozzy.PTS_1 -p x -t 0,0,1,1,2,2 -a 2

Could you post the output of the miner and your config?

Quote from: NaN on March 31, 2014, 06:23:11 PM

Quote from: ozzy on March 31, 2014, 08:48:35 AM

Quote from: chaosz88 on March 30, 2014, 12:56:28 AM

Quote from: ozzy on March 28, 2014, 07:13:02 PM

Quote from: NaN on March 28, 2014, 06:50:07 PM
I used C++11 for the new miner. Is your glibc up to date? Perhaps I should revert to boost and statically link it. Which distro do you use?
EDIT: Oh, the correct syntax is
./clpts -o 0,6 Pezz4JUPfpAFTSSwWgp1TMpCcS1YvEqVsn -u ozzy.PTS_1 -p x -t 0,0,1,1,2,2 -a 2

yea i also tried the ./clpts -o 0,6 Pezz4JUPfpAFTSSwWgp1TMpCcS1YvEqVsn -u ozzy.PTS_1 -p x -t 0,0,1,1,2,2 -a 2

but it didnt work .And i dont know if i have the latest c++11 i dont know much about linux (i am using ubuntu 12.04 )
edit i manage to install but :
installed
                      Conflicts: libstdc++6-4.5-dbg but 4.5.3-12ubuntu2 is to be installed
                      Conflicts: libstdc++6-4.6-dbg but 4.6.4-1ubuntu1~12.04 is to be installed
libstdc++6-4.7-doc : Conflicts: libstdc++6-4.4-doc but 4.4.7-1ubuntu2 is to be installed
                      Conflicts: libstdc++6-4.5-doc but 4.5.3-12ubuntu2 is to be installed
                      Conflicts: libstdc++6-4.6-doc but 4.6.4-1ubuntu1~12.04 is to be installed
libstdc++6-4.8-dbg : Conflicts: libstdc++6-4.4-dbg but 4.4.7-1ubuntu2 is to be installed
                      Conflicts: libstdc++6-4.5-dbg but 4.5.3-12ubuntu2 is to be installed
                      Conflicts: libstdc++6-4.6-dbg but 4.6.4-1ubuntu1~12.04 is to be installed
                      Conflicts: libstdc++6-4.7-dbg but 4.7.3-2ubuntu1~12.04 is to be installed
E: Unable to correct problems, you have held broken packages.

I got the same error with Ubuntu 12.04, I solved it by

sudo apt-get install libstdc++6

it also doesnt work
i am geting :
libstdc++6 is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 57 not upgraded.

btw i am using amd-catalyst-14.1-betav1.3-linux-x86.x86_64 drivers

Did you try to use v1.1? If it does not work I can give you a statically linked version of the miner so there are no dependencies on OS-libraries. The disadvantage is that the binaries become several MB large.

yes i couldntmake v1.1 when i click the run in terminal window the miner window just opens and closes, v0.2.2 works ok   

Is there any performance improvement with version 1.x compared against 0.2.2?

Quote from: ozzy on March 31, 2014, 08:48:35 AM

Quote from: chaosz88 on March 30, 2014, 12:56:28 AM

Quote from: ozzy on March 28, 2014, 07:13:02 PM

Quote from: NaN on March 28, 2014, 06:50:07 PM
I used C++11 for the new miner. Is your glibc up to date? Perhaps I should revert to boost and statically link it. Which distro do you use?
EDIT: Oh, the correct syntax is
./clpts -o 0,6 Pezz4JUPfpAFTSSwWgp1TMpCcS1YvEqVsn -u ozzy.PTS_1 -p x -t 0,0,1,1,2,2 -a 2

yea i also tried the ./clpts -o 0,6 Pezz4JUPfpAFTSSwWgp1TMpCcS1YvEqVsn -u ozzy.PTS_1 -p x -t 0,0,1,1,2,2 -a 2

but it didnt work .And i dont know if i have the latest c++11 i dont know much about linux (i am using ubuntu 12.04 )
edit i manage to install but :
installed
                      Conflicts: libstdc++6-4.5-dbg but 4.5.3-12ubuntu2 is to be installed
                      Conflicts: libstdc++6-4.6-dbg but 4.6.4-1ubuntu1~12.04 is to be installed
libstdc++6-4.7-doc : Conflicts: libstdc++6-4.4-doc but 4.4.7-1ubuntu2 is to be installed
                      Conflicts: libstdc++6-4.5-doc but 4.5.3-12ubuntu2 is to be installed
                      Conflicts: libstdc++6-4.6-doc but 4.6.4-1ubuntu1~12.04 is to be installed
libstdc++6-4.8-dbg : Conflicts: libstdc++6-4.4-dbg but 4.4.7-1ubuntu2 is to be installed
                      Conflicts: libstdc++6-4.5-dbg but 4.5.3-12ubuntu2 is to be installed
                      Conflicts: libstdc++6-4.6-dbg but 4.6.4-1ubuntu1~12.04 is to be installed
                      Conflicts: libstdc++6-4.7-dbg but 4.7.3-2ubuntu1~12.04 is to be installed
E: Unable to correct problems, you have held broken packages.

I got the same error with Ubuntu 12.04, I solved it by

sudo apt-get install libstdc++6

it also doesnt work
i am geting :
libstdc++6 is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 57 not upgraded.

btw i am using amd-catalyst-14.1-betav1.3-linux-x86.x86_64 drivers

Did you try to use v1.1? If it does not work I can give you a statically linked version of the miner so there are no dependencies on OS-libraries. The disadvantage is that the binaries become several MB large.

Quote from: Alec246 on March 31, 2014, 05:36:17 PM
I don't want to mess too much with my Linux because it's working flawless for CgMiner! If I Start doing stuff to it, I will probably crash it, and since I have no Linux experience, the only way will be a complete Format :/

Here's the tutorial I followed

https://www.weminecryptos.com/forum/topic/2187-guide-housing-xubuntu-setup-amd-drivers-kdev-sd-cgminer-monitoring-and-vbios-flashing/

The output is simply No GPU Device with the id.

That sounds like you're using wrong command line arguments. Could you post the output of the miner and your command line arguments?

Quote from: Alec246 on March 31, 2014, 05:36:17 PM
I don't want to mess too much with my Linux because it's working flawless for CgMiner! If I Start doing stuff to it, I will probably crash it, and since I have no Linux experience, the only way will be a complete Format :/

Here's the tutorial I followed

https://www.weminecryptos.com/forum/topic/2187-guide-housing-xubuntu-setup-amd-drivers-kdev-sd-cgminer-monitoring-and-vbios-flashing/

The output is simply No GPU Device with the id.

What you have in this "aticonfig --lsa"...


EDIT: Share the actual output of the miner when you try to run it

Hi folks....

You have to understand that if you want help you have to give back something.. just saying that it does not work.. doesn't help anyone nor it will be enough for anyone from the community to help.

Try to be logic... when you have a problem.. share the errors, configs, when problem started to happen, when it did not.. etc etc...

There are no magic within devs...  they are all hard working geeks =)

I don't want to mess too much with my Linux because it's working flawless for CgMiner! If I Start doing stuff to it, I will probably crash it, and since I have no Linux experience, the only way will be a complete Format :/

Here's the tutorial I followed

https://www.weminecryptos.com/forum/topic/2187-guide-housing-xubuntu-setup-amd-drivers-kdev-sd-cgminer-monitoring-and-vbios-flashing/

The output is simply No GPU Device with the id.

Quote from: NaN on March 31, 2014, 01:40:23 PM
Is your xorg.conf ok and is a X-server running? Otherwise you have to run the miner with sudo.

can you tell me what am i doing wrong?I am trying for 3 days but cant run the newest miner :/

Quote from: Alec246 on March 31, 2014, 04:38:40 PM
Tried with Sudo.

Pretty sure everything is OK otherwise I wouldn't be able to mine with cgminer.

Can you post the output? Are you using/booting into single user mode (init 3) ? Is "startx" command working?

Quote from: ozzy on March 31, 2014, 08:48:35 AM

Quote from: chaosz88 on March 30, 2014, 12:56:28 AM

Quote from: ozzy on March 28, 2014, 07:13:02 PM

Quote from: NaN on March 28, 2014, 06:50:07 PM
I used C++11 for the new miner. Is your glibc up to date? Perhaps I should revert to boost and statically link it. Which distro do you use?
EDIT: Oh, the correct syntax is
./clpts -o 0,6 Pezz4JUPfpAFTSSwWgp1TMpCcS1YvEqVsn -u ozzy.PTS_1 -p x -t 0,0,1,1,2,2 -a 2

yea i also tried the ./clpts -o 0,6 Pezz4JUPfpAFTSSwWgp1TMpCcS1YvEqVsn -u ozzy.PTS_1 -p x -t 0,0,1,1,2,2 -a 2

but it didnt work .And i dont know if i have the latest c++11 i dont know much about linux (i am using ubuntu 12.04 )
edit i manage to install but :
installed
                      Conflicts: libstdc++6-4.5-dbg but 4.5.3-12ubuntu2 is to be installed
                      Conflicts: libstdc++6-4.6-dbg but 4.6.4-1ubuntu1~12.04 is to be installed
libstdc++6-4.7-doc : Conflicts: libstdc++6-4.4-doc but 4.4.7-1ubuntu2 is to be installed
                      Conflicts: libstdc++6-4.5-doc but 4.5.3-12ubuntu2 is to be installed
                      Conflicts: libstdc++6-4.6-doc but 4.6.4-1ubuntu1~12.04 is to be installed
libstdc++6-4.8-dbg : Conflicts: libstdc++6-4.4-dbg but 4.4.7-1ubuntu2 is to be installed
                      Conflicts: libstdc++6-4.5-dbg but 4.5.3-12ubuntu2 is to be installed
                      Conflicts: libstdc++6-4.6-dbg but 4.6.4-1ubuntu1~12.04 is to be installed
                      Conflicts: libstdc++6-4.7-dbg but 4.7.3-2ubuntu1~12.04 is to be installed
E: Unable to correct problems, you have held broken packages.

I got the same error with Ubuntu 12.04, I solved it by

sudo apt-get install libstdc++6

it also doesnt work
i am geting :
libstdc++6 is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 57 not upgraded.

btw i am using amd-catalyst-14.1-betav1.3-linux-x86.x86_64 drivers

You have libstdc++6-4.4 installed and probably have multiple sources.. with different names of the same package... try to remove all the libstdc++ and dependent packages and then install them again.. but using only one source. This is not a miner problem.. it's an OS config know how...

If you are uncomfortable with ubunto.. try other OSs you are ok with... you have fedora, centos, windows.. etc etc...

Otherwise.. post more details. (the more you can get)

Tried with Sudo.

Pretty sure everything is OK otherwise I wouldn't be able to mine with cgminer.

Is your xorg.conf ok and is a X-server running? Otherwise you have to run the miner with sudo.