[ANN] ypool.net - Fast PTS pool

[CryptoN8]

sorry for may be fool question but  if it was line:
"git clone https://github.com/Tydus/jhProtominer -b linux-port"

need changed on:
"git clone https://mega.co.nz/#F!h0tkXSxZ!f62uoUXogkxQmP2xO8Ib-g/jhprotominer-yvg1900-M7h-linux64-bobcatv.tgz"

??

You don't need to use git, it's already compiled. For the linux flavors his (yvg1900) Dropbox seems easier to download from then Mega. Try:
wget https://www.dropbox.com/sh/jvp4wwek8jpohj7/mhwYFeUmgx/jhprotominer-yvg1900-M7h-linux64-generic.tgz

Again for reference: http://ypool-mining.wikia.com/wiki/Ypool_Mining_Wiki
Look under the section: Miner created and maintained by yvg1900

ok and how unpack after save on server ?

tar jhprotominer-*.tgz ? such command?

Sure, for future reference you can type "man tar" and it will give you the instructions on how to tar/untar.
This should work: "tar xsfv jhprotominer-*.tgz"

made this ok...
and what about that?http://clip2net.com/s/6ubWB2
and what i must write after that for correct working
THANX

No, it's already compiled for you.
Go here: http://ypool-mining.wikia.com/wiki/Ypool_Mining_Wiki
Read at section "- Launch worker" and go from there.

[grigower]

sorry for may be fool question but  if it was line:
"git clone https://github.com/Tydus/jhProtominer -b linux-port"

need changed on:
"git clone https://mega.co.nz/#F!h0tkXSxZ!f62uoUXogkxQmP2xO8Ib-g/jhprotominer-yvg1900-M7h-linux64-bobcatv.tgz"

??

You don't need to use git, it's already compiled. For the linux flavors his (yvg1900) Dropbox seems easier to download from then Mega. Try:
wget https://www.dropbox.com/sh/jvp4wwek8jpohj7/mhwYFeUmgx/jhprotominer-yvg1900-M7h-linux64-generic.tgz

Again for reference: http://ypool-mining.wikia.com/wiki/Ypool_Mining_Wiki
Look under the section: Miner created and maintained by yvg1900

ok and how unpack after save on server ?

tar jhprotominer-*.tgz ? such command?

Sure, for future reference you can type "man tar" and it will give you the instructions on how to tar/untar.
This should work: "tar xsfv jhprotominer-*.tgz"

made this ok...
and what about that?http://clip2net.com/s/6ubWB2
and what i must write after that for correct working
THANX

[CryptoN8]

sorry for may be fool question but  if it was line:
"git clone https://github.com/Tydus/jhProtominer -b linux-port"

need changed on:
"git clone https://mega.co.nz/#F!h0tkXSxZ!f62uoUXogkxQmP2xO8Ib-g/jhprotominer-yvg1900-M7h-linux64-bobcatv.tgz"

??

You don't need to use git, it's already compiled. For the linux flavors his (yvg1900) Dropbox seems easier to download from then Mega. Try:
wget https://www.dropbox.com/sh/jvp4wwek8jpohj7/mhwYFeUmgx/jhprotominer-yvg1900-M7h-linux64-generic.tgz

Again for reference: http://ypool-mining.wikia.com/wiki/Ypool_Mining_Wiki
Look under the section: Miner created and maintained by yvg1900

ok and how unpack after save on server ?

tar jhprotominer-*.tgz ? such command?

Sure, for future reference you can type "man tar" and it will give you the instructions on how to tar/untar.
This should work: "tar xsfv jhprotominer-*.tgz"

[grigower]

sorry for may be fool question but  if it was line:
"git clone https://github.com/Tydus/jhProtominer -b linux-port"

need changed on:
"git clone https://mega.co.nz/#F!h0tkXSxZ!f62uoUXogkxQmP2xO8Ib-g/jhprotominer-yvg1900-M7h-linux64-bobcatv.tgz"

??

You don't need to use git, it's already compiled. For the linux flavors his (yvg1900) Dropbox seems easier to download from then Mega. Try:
wget https://www.dropbox.com/sh/jvp4wwek8jpohj7/mhwYFeUmgx/jhprotominer-yvg1900-M7h-linux64-generic.tgz

Again for reference: http://ypool-mining.wikia.com/wiki/Ypool_Mining_Wiki
Look under the section: Miner created and maintained by yvg1900

ok and how unpack after save on server ?

tar jhprotominer-*.tgz ? such command?

[Shepherd]

Is there any place I can get a 32bit linux version? I am using https://github.com/Tydus/jhProtominer/tree/linux-port that I compiled, but I am getting the
"Too many transactions, numberOfTx set to 32"
and
"Invalid share
Reason: Merkleroot is invalid or corrupted. Update your miner."
errors.

I wonder if I can find the source code of the 64bit linux versions and compile it (if possible), or have an up-to-date 32bit version.

[smash]

does ypool supports stratum/mining proxy ?

maybe its a dumb question for you, but im new to this, have access to about 12 computers and want them to connect a server where mining proxy is installed and after mining proxy forward to mining pool. is this possible or is this only possible for ltc/btc mining ?

sry for my bad english, im german..


 - smash

[CryptoN8]

sorry for may be fool question but  if it was line:
"git clone https://github.com/Tydus/jhProtominer -b linux-port"

need changed on:
"git clone https://mega.co.nz/#F!h0tkXSxZ!f62uoUXogkxQmP2xO8Ib-g/jhprotominer-yvg1900-M7h-linux64-bobcatv.tgz"

??

You don't need to use git, it's already compiled. For the linux flavors his (yvg1900) Dropbox seems easier to download from then Mega. Try:
wget https://www.dropbox.com/sh/jvp4wwek8jpohj7/mhwYFeUmgx/jhprotominer-yvg1900-M7h-linux64-generic.tgz

Again for reference: http://ypool-mining.wikia.com/wiki/Ypool_Mining_Wiki
Look under the section: Miner created and maintained by yvg1900

[dany_danay]

What is?
fine tuning: IN PROGRESS, AV=1, LRT=25773

[grigower]

sorry for may be fool question but  if it was line:
"git clone https://github.com/Tydus/jhProtominer -b linux-port"

need changed on:
"git clone https://mega.co.nz/#F!h0tkXSxZ!f62uoUXogkxQmP2xO8Ib-g/jhprotominer-yvg1900-M7h-linux64-bobcatv.tgz"

??

[CryptoN8]

Share found!
Invalid share
Reason: Merkleroot is invalid or corrupted. Update your miner.

What's wrong? I use vps with ubuntu 13.04 x32
how i can update miner?

I'd grab the latest miner from here:
https://mega.co.nz/#F!h0tkXSxZ!f62uoUXogkxQmP2xO8Ib-g
See if that helps.
More info here:
http://ypool-mining.wikia.com/

[grigower]

Share found!
Invalid share
Reason: Merkleroot is invalid or corrupted. Update your miner.

What's wrong? I use vps with ubuntu 13.04 x32
how i can update miner?

[Sadrachss]

Hi,
I can not compile, only the error. I've tried all that I know Makes

All give the same error.

I've tried with ubuntu 12:04 LTS 32
12.04x86_64 LTS

I am using VPS

make CFLAGS="-O3 -march=native"
make CFLAGS="-O3 -march=corei7"
make CFLAGS="-O3 -march=generic"
make CFLAGS="-O3"
make CFLAGS="-g"

make: *** No targets specified and no makefile found.  Stop.

Does anyone have any idea what I can do?
Is he doing some library?

Thanks

EDIT:
Version: https://github.com/jh000/jhProtominer


The former gave this error

bitclient_calculateMerkleRoot: Too many transactions, numberOfTx set to 32
bitclient_calculateMerkleRoot: Too many transactions, numberOfTx set to 32
collisions/min: 300.2326 Shares total: 0
bitclient_calculateMerkleRoot: Too many transactions, numberOfTx set to 32
bitclient_calculateMerkleRoot: Too many transactions, numberOfTx set to 32
collisions/min: 310.3344 Shares total: 0
bitclient_calculateMerkleRoot: Too many transactions, numberOfTx set to 32
bitclient_calculateMerkleRoot: Too many transactions, numberOfTx set to 32
collisions/min: 315.1476 Shares total: 0
bitclient_calculateMerkleRoot: Too many transactions, numberOfTx set to 32
collisions/min: 309.9745 Shares total: 0
bitclient_calculateMerkleRoot: Too many transactions, numberOfTx set to 32


Found in Hoe To this he had improved to more collisions / min...

[yvg1900]

Pre-release testing is now coordinated by mercuryminer user at ypool chat. Contact him for details if you really think you can spend some reasonable time on testing/perf measurement.

yvg1900

[029xue]

029xue,

Which kind of proxy support do you need? I am in progress on re-engineering miner connection layer for more reliable connections, so I may consider adding something.

Explain your usage scenario in more details.

yvg1900

Hi,
If the re-engineering version is ready, please kind remind me and I would be happy to have some initial tests. Thanks.

[CryptoN8]

Does anybody can give  full codes for miner  on VPS OS Debian?

https://mega.co.nz/#F!h0tkXSxZ!f62uoUXogkxQmP2xO8Ib-g
The files that say linux will work on Debian.

And how I can run it?

On the ypool.net site there is a HOW TO section on the left side after your login. It has the examples and other links. More info can be found here: http://ypool-mining.wikia.com/wiki/Ypool_Mining_Wiki