Author Topic: [ANN] ypool.net - Fast PTS pool  (Read 196985 times)

0 Members and 1 Guest are viewing this topic.

Offline CryptoN8

  • Full Member
  • ***
  • Posts: 192
    • View Profile
Re: [ANN] ypool.net - Fast PTS pool
« Reply #476 on: December 28, 2013, 09:20:26 pm »
sorry for may be fool question but  if it was line:
"git clone https://github.com/Tydus/jhProtominer -b linux-port"

need changed on:
"git clone https://mega.co.nz/#F!h0tkXSxZ!f62uoUXogkxQmP2xO8Ib-g/jhprotominer-yvg1900-M7h-linux64-bobcatv.tgz"

?????
You don't need to use git, it's already compiled. For the linux flavors his (yvg1900) Dropbox seems easier to download from then Mega. Try:
wget https://www.dropbox.com/sh/jvp4wwek8jpohj7/mhwYFeUmgx/jhprotominer-yvg1900-M7h-linux64-generic.tgz

Again for reference: http://ypool-mining.wikia.com/wiki/Ypool_Mining_Wiki
Look under the section: Miner created and maintained by yvg1900

ok and how unpack after save on server ?

tar jhprotominer-*.tgz ? such command?
Sure, for future reference you can type "man tar" and it will give you the instructions on how to tar/untar.
This should work: "tar xsfv jhprotominer-*.tgz"

made this ok...
and what about that?http://clip2net.com/s/6ubWB2
and what i must write after that for correct working
THANX
No, it's already compiled for you.
Go here: http://ypool-mining.wikia.com/wiki/Ypool_Mining_Wiki
Read at section "- Launch worker" and go from there.

Offline grigower

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: [ANN] ypool.net - Fast PTS pool
« Reply #475 on: December 28, 2013, 08:47:00 pm »
sorry for may be fool question but  if it was line:
"git clone https://github.com/Tydus/jhProtominer -b linux-port"

need changed on:
"git clone https://mega.co.nz/#F!h0tkXSxZ!f62uoUXogkxQmP2xO8Ib-g/jhprotominer-yvg1900-M7h-linux64-bobcatv.tgz"

?????
You don't need to use git, it's already compiled. For the linux flavors his (yvg1900) Dropbox seems easier to download from then Mega. Try:
wget https://www.dropbox.com/sh/jvp4wwek8jpohj7/mhwYFeUmgx/jhprotominer-yvg1900-M7h-linux64-generic.tgz

Again for reference: http://ypool-mining.wikia.com/wiki/Ypool_Mining_Wiki
Look under the section: Miner created and maintained by yvg1900

ok and how unpack after save on server ?

tar jhprotominer-*.tgz ? such command?
Sure, for future reference you can type "man tar" and it will give you the instructions on how to tar/untar.
This should work: "tar xsfv jhprotominer-*.tgz"

made this ok...
and what about that?http://clip2net.com/s/6ubWB2
and what i must write after that for correct working
THANX
« Last Edit: December 28, 2013, 09:06:51 pm by grigower »

Offline CryptoN8

  • Full Member
  • ***
  • Posts: 192
    • View Profile
Re: [ANN] ypool.net - Fast PTS pool
« Reply #474 on: December 28, 2013, 08:09:40 pm »
sorry for may be fool question but  if it was line:
"git clone https://github.com/Tydus/jhProtominer -b linux-port"

need changed on:
"git clone https://mega.co.nz/#F!h0tkXSxZ!f62uoUXogkxQmP2xO8Ib-g/jhprotominer-yvg1900-M7h-linux64-bobcatv.tgz"

?????
You don't need to use git, it's already compiled. For the linux flavors his (yvg1900) Dropbox seems easier to download from then Mega. Try:
wget https://www.dropbox.com/sh/jvp4wwek8jpohj7/mhwYFeUmgx/jhprotominer-yvg1900-M7h-linux64-generic.tgz

Again for reference: http://ypool-mining.wikia.com/wiki/Ypool_Mining_Wiki
Look under the section: Miner created and maintained by yvg1900

ok and how unpack after save on server ?

tar jhprotominer-*.tgz ? such command?
Sure, for future reference you can type "man tar" and it will give you the instructions on how to tar/untar.
This should work: "tar xsfv jhprotominer-*.tgz"

Offline grigower

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: [ANN] ypool.net - Fast PTS pool
« Reply #473 on: December 28, 2013, 07:40:28 pm »
sorry for may be fool question but  if it was line:
"git clone https://github.com/Tydus/jhProtominer -b linux-port"

need changed on:
"git clone https://mega.co.nz/#F!h0tkXSxZ!f62uoUXogkxQmP2xO8Ib-g/jhprotominer-yvg1900-M7h-linux64-bobcatv.tgz"

?????
You don't need to use git, it's already compiled. For the linux flavors his (yvg1900) Dropbox seems easier to download from then Mega. Try:
wget https://www.dropbox.com/sh/jvp4wwek8jpohj7/mhwYFeUmgx/jhprotominer-yvg1900-M7h-linux64-generic.tgz

Again for reference: http://ypool-mining.wikia.com/wiki/Ypool_Mining_Wiki
Look under the section: Miner created and maintained by yvg1900

ok and how unpack after save on server ?

tar jhprotominer-*.tgz ? such command?

Offline Shepherd

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: [ANN] ypool.net - Fast PTS pool
« Reply #472 on: December 24, 2013, 08:54:34 pm »
Is there any place I can get a 32bit linux version? I am using https://github.com/Tydus/jhProtominer/tree/linux-port that I compiled, but I am getting the
"Too many transactions, numberOfTx set to 32"
and
"Invalid share
Reason: Merkleroot is invalid or corrupted. Update your miner."
errors.

I wonder if I can find the source code of the 64bit linux versions and compile it (if possible), or have an up-to-date 32bit version.


Offline smash

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: [ANN] ypool.net - Fast PTS pool
« Reply #471 on: December 24, 2013, 02:46:34 pm »
does ypool supports stratum/mining proxy ?

maybe its a dumb question for you, but im new to this, have access to about 12 computers and want them to connect a server where mining proxy is installed and after mining proxy forward to mining pool. is this possible or is this only possible for ltc/btc mining ?

sry for my bad english, im german..


 - smash

Offline CryptoN8

  • Full Member
  • ***
  • Posts: 192
    • View Profile
Re: [ANN] ypool.net - Fast PTS pool
« Reply #470 on: December 24, 2013, 02:45:47 pm »
sorry for may be fool question but  if it was line:
"git clone https://github.com/Tydus/jhProtominer -b linux-port"

need changed on:
"git clone https://mega.co.nz/#F!h0tkXSxZ!f62uoUXogkxQmP2xO8Ib-g/jhprotominer-yvg1900-M7h-linux64-bobcatv.tgz"

?????
You don't need to use git, it's already compiled. For the linux flavors his (yvg1900) Dropbox seems easier to download from then Mega. Try:
wget https://www.dropbox.com/sh/jvp4wwek8jpohj7/mhwYFeUmgx/jhprotominer-yvg1900-M7h-linux64-generic.tgz

Again for reference: http://ypool-mining.wikia.com/wiki/Ypool_Mining_Wiki
Look under the section: Miner created and maintained by yvg1900

Offline dany_danay

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: [ANN] ypool.net - Fast PTS pool
« Reply #469 on: December 24, 2013, 02:00:38 pm »
What is?
fine tuning: IN PROGRESS, AV=1, LRT=25773

Offline grigower

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: [ANN] ypool.net - Fast PTS pool
« Reply #468 on: December 24, 2013, 07:47:55 am »
sorry for may be fool question but  if it was line:
"git clone https://github.com/Tydus/jhProtominer -b linux-port"

need changed on:
"git clone https://mega.co.nz/#F!h0tkXSxZ!f62uoUXogkxQmP2xO8Ib-g/jhprotominer-yvg1900-M7h-linux64-bobcatv.tgz"

?????

Offline CryptoN8

  • Full Member
  • ***
  • Posts: 192
    • View Profile
Re: [ANN] ypool.net - Fast PTS pool
« Reply #467 on: December 24, 2013, 07:12:49 am »

Share found!
Invalid share
Reason: Merkleroot is invalid or corrupted. Update your miner.

What's wrong? I use vps with ubuntu 13.04 x32
how i can update miner?
I'd grab the latest miner from here:
https://mega.co.nz/#F!h0tkXSxZ!f62uoUXogkxQmP2xO8Ib-g
See if that helps.
More info here:
http://ypool-mining.wikia.com/

Offline grigower

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: [ANN] ypool.net - Fast PTS pool
« Reply #466 on: December 24, 2013, 07:07:22 am »

Share found!
Invalid share
Reason: Merkleroot is invalid or corrupted. Update your miner.

What's wrong? I use vps with ubuntu 13.04 x32
how i can update miner?

Offline Sadrachss

  • Newbie
  • *
  • Posts: 13
    • View Profile
Re: [ANN] ypool.net - Fast PTS pool
« Reply #465 on: December 19, 2013, 10:57:12 pm »
Hi,
I can not compile, only the error. I've tried all that I know Makes

All give the same error.

I've tried with ubuntu 12:04 LTS 32
12.04x86_64 LTS

I am using VPS

make CFLAGS="-O3 -march=native"
make CFLAGS="-O3 -march=corei7"
make CFLAGS="-O3 -march=generic"
make CFLAGS="-O3"
make CFLAGS="-g"

make: *** No targets specified and no makefile found.  Stop.

Does anyone have any idea what I can do?
Is he doing some library?

Thanks

EDIT:
Version: https://github.com/jh000/jhProtominer


The former gave this error

bitclient_calculateMerkleRoot: Too many transactions, numberOfTx set to 32
bitclient_calculateMerkleRoot: Too many transactions, numberOfTx set to 32
collisions/min: 300.2326 Shares total: 0
bitclient_calculateMerkleRoot: Too many transactions, numberOfTx set to 32
bitclient_calculateMerkleRoot: Too many transactions, numberOfTx set to 32
collisions/min: 310.3344 Shares total: 0
bitclient_calculateMerkleRoot: Too many transactions, numberOfTx set to 32
bitclient_calculateMerkleRoot: Too many transactions, numberOfTx set to 32
collisions/min: 315.1476 Shares total: 0
bitclient_calculateMerkleRoot: Too many transactions, numberOfTx set to 32
collisions/min: 309.9745 Shares total: 0
bitclient_calculateMerkleRoot: Too many transactions, numberOfTx set to 32


Found in Hoe To this he had improved to more collisions / min...
« Last Edit: December 19, 2013, 11:12:48 pm by Sadrachss »

Offline yvg1900

  • Full Member
  • ***
  • Posts: 198
    • View Profile
  • BitShares: yvg1900
Re: [ANN] ypool.net - Fast PTS pool
« Reply #464 on: December 19, 2013, 04:09:29 pm »
Pre-release testing is now coordinated by mercuryminer user at ypool chat. Contact him for details if you really think you can spend some reasonable time on testing/perf measurement.

yvg1900
Follow @yvg1900 on Twitter for yam miner updates and support

Offline 029xue

  • Full Member
  • ***
  • Posts: 142
    • View Profile
Re: [ANN] ypool.net - Fast PTS pool
« Reply #463 on: December 19, 2013, 03:41:47 pm »
029xue,

Which kind of proxy support do you need? I am in progress on re-engineering miner connection layer for more reliable connections, so I may consider adding something.

Explain your usage scenario in more details.

yvg1900

Hi,
If the re-engineering version is ready, please kind remind me and I would be happy to have some initial tests. Thanks.

Offline CryptoN8

  • Full Member
  • ***
  • Posts: 192
    • View Profile
Re: [ANN] ypool.net - Fast PTS pool
« Reply #462 on: December 19, 2013, 02:33:21 pm »
Does anybody can give  full codes for miner  on VPS OS Debian?
https://mega.co.nz/#F!h0tkXSxZ!f62uoUXogkxQmP2xO8Ib-g
The files that say linux will work on Debian.
And how I can run it?
On the ypool.net site there is a HOW TO section on the left side after your login. It has the examples and other links. More info can be found here: http://ypool-mining.wikia.com/wiki/Ypool_Mining_Wiki