Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - beatfried

Pages: [1]
1
BitShares PTS / Re: [ANN] ptsweb.beeeeer.org - Protoshares mining sub-pool
« on: February 21, 2014, 12:17:19 pm »
I also had pretty high rejection rate yesterday evening but can't tell exact numbers.
But I got disconnect some times because of 14(?) rejects in a row...

2
BitShares PTS / Re: [ANN] ptsweb.beeeeer.org - Protoshares mining sub-pool
« on: February 20, 2014, 08:30:02 am »
pool down?

3
BitShares PTS / Re: [ANN] ptsweb.beeeeer.org - Protoshares mining sub-pool
« on: February 19, 2014, 10:12:43 pm »
sorry if thats a stupid question, but, where do you get all that stats from?
but thanks for your work! the stats are really nice!

I didn't notice a increse in sh/m, i got 20% less then yesterday :/

4
BitShares PTS / Re: [ANN] ptsweb.beeeeer.org - Protoshares mining sub-pool
« on: February 17, 2014, 12:08:09 pm »
Quote from: xolokram on February 16, 2014, 05:44:54 pm
sorry beatfried, i totally missed that :o

mining --- e.g. bitcoin, litecoins, protoshares, etc.pp. --- means that you're searching values in a pre-defined calculation that meet certain characteristics (often it just means that the solution of a specific calculation needs to be less than a specified value, which is the current/fluctuating "difficulty").

these characteristics often contain a random property (e.g. using a hash function that needs to be calculated).

thus all the miners are doing is "just" a (VERY LARGE) trial-and-error on all possible values to find a value that meets the current target difficult of the network.

thus sometimes a block needs 1.000 shares, sometimes 1.000.000 shares.

- xolokram

ps. i hope that was helpful
pps. i'll redirect the old pts page (ptsweb.beeeeer.org) to the beta pages (beta.beeeeer.org) soon®
thank you man for the explanation!
that made many things so much clearer :D

5
BitShares PTS / Re: fast AMD OpenCL PTS miner released
« on: February 16, 2014, 02:08:08 pm »
yeah... ubuntu 12.04 LTS
2x r9 290 @ 1125/1400
1x r9 290 @ stock

~12000 cpm

oh, and my cards are always slower with -a 1 than with -a 0. don't know why ...

6
BitShares PTS / Re: [ANN] ptsweb.beeeeer.org - Protoshares mining sub-pool
« on: February 16, 2014, 12:45:41 pm »
Quote from: xolokram on February 16, 2014, 08:33:29 am
@beatfried:
the payout barrier on beeeeer's PTS pool is 0.2 PTS, thus if you earn more than 0.2 PTS per block you'll be paid immediately per block (ok with a few minutes of delay due to the technical implementation)
yeah I know that, but that wasn't my question. I'm asking why one block needed ~8000 Shares and another Block needed ~1600000 Shares.

7
BitShares PTS / Re: [ANN] ptsweb.beeeeer.org - Protoshares mining sub-pool
« on: February 15, 2014, 09:57:46 pm »
I'm pretty new to all this mining-stuff, so can someone explain this to me?
Actually i'm mining with about 12000cpm.

Yesterday i got 0.29 PTS out of one block on which I had ~180 Shares (that took like 5 Minutes.. lol..) and today i got 0.19 PTS out of one block on which I had ~24000 Shares.

I can see in the Blockinfo that this Block needed 1685375 Shares (I Think thats the info out of the "shares_sum"?) and the one yesterday only 8408. But how can this happen? They got the exact same Difficulty and the (more or less) same reward... thats makes absoluteley no sense for me... thanks to that there were only ~8 Blocks solved today vs. ~16 yesterday and this directly affects my wallet :/

8
BitShares PTS / Re: [ANN] ptsweb.beeeeer.org - Protoshares mining sub-pool
« on: February 14, 2014, 08:15:53 am »
Mining's working again, but there are no stats for my user :/

9
BitShares PTS / Re: fast AMD OpenCL PTS miner released
« on: February 11, 2014, 11:43:39 pm »
Just wanna check if my values are okay or not:

I got actually 2 R9 290, producing about 6400 cpm, but only ~24 spm. Is this okay? I'm just asking because Hukkel said 16900 cpm will make about 1800 spm... that would make 600+ spm for my 6400 cpm (if I wasn't to sleepy to calcuate that :D):/

10
BitShares PTS / Re: cudaPTSwin - Beeeeer - Fastest optimized PTS GPU miner for windows 64 bit
« on: February 11, 2014, 02:40:27 pm »
Hi...

I got a problem:

I'm mining with two GTX Titans. Started with arCUDAminer on which I get ~4000c/m. Now I don't really like ypool so I wanted to give this one here a try but I only get 1500 c/m per card... thats pretty dissapointing..

11
BitShares PTS / Re: fast AMD OpenCL PTS miner released
« on: February 11, 2014, 12:44:39 am »
Hi :)

So, I got a little Problem...

Code: [Select]
C:\clpts-v0.1.4_win_x86-64>clpts_x86-64.exe PcGVSa1S5K7bYjL9BaBaEYzRdFHTwRW6PW -
t 2 -a 0
*****************************************************************************
** clpts - OpenCL PTS Pool Miner v0.1.4
** by NaN - based on ptsminer.
** If you like this software, please consider sending tips to: opencl.miner@gmail.com
** PTS:  PtLx9kDLTXtR1ae3u7naXLPeGjjHZ1PGoR
** BTC:  1AumJ5uzz1nuER7pBA6Bh4gNusaxhN85rc
** Your donations will encourage further optimization and development
**
** press CTRL+C to exit
*****************************************************************************
Vendor of used platform (#1 / 1): Advanced Micro Devices, Inc.
Name of device #1 / 3 (deviceID 0): Cypress
Name of device #2 / 3 (deviceID 1): Cypress
Name of device #3 / 3 (deviceID 2): Hawaii


spawning 1 worker thread(s)
[WORKER0] Hello, World!
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdo
pencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdo
pencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdo
pencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdo
pencl' and 'amdil-pc-amdopencl'
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!


Messages during compilation of program for device 'Hawaii':

LOOP UNROLL: pragma unroll (line 162)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 112)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 179)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 169)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 222)
    Unrolled as requested!

[MASTER] 2014-Feb-11 01:32:40 | work received | sharetarget: 00ffffffffffffffffffffffffffffffffffffffffffffffffffffffbeefde4d
[WORKER0] share found: 24033445 <-> 48762637 #1 (120) @ 1392078802
[STATS] 2014-Feb-11 01:32:50 | 756.00 c/m | 6.00 sh/m | VL: 1 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER0] share found: 50185798 <-> 59691287 #2 (212) @ 1392078835
[STATS] 2014-Feb-11 01:33:00 | 816.00 c/m | 6.00 sh/m | VL: 2 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER0] share found: 47562799 <-> 47929195 #3 (322) @ 1392078875
[WORKER0] share found: 15232725 <-> 38644667 #4 (410) @ 1392078907
[STATS] 2014-Feb-11 01:33:10 | 832.00 c/m | 8.00 sh/m | VL: 4 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
Thats everything I get out of a R9 290. I'm a little disappointed.. :\

This is the result with one core of my 5970:
Code: [Select]
C:\clpts-v0.1.4_win_x86-64>clpts_x86-64.exe PcGVSa1S5K7bYjL9BaBaEYzRdFHTwRW6PW -t 0 -a 0
*****************************************************************************
** clpts - OpenCL PTS Pool Miner v0.1.4
** by NaN - based on ptsminer.
** If you like this software, please consider sending tips to: opencl.miner@gmail.com
** PTS:  PtLx9kDLTXtR1ae3u7naXLPeGjjHZ1PGoR
** BTC:  1AumJ5uzz1nuER7pBA6Bh4gNusaxhN85rc
** Your donations will encourage further optimization and development
**
** press CTRL+C to exit
*****************************************************************************
Vendor of used platform (#1 / 1): Advanced Micro Devices, Inc.
        Name of device #1 / 3 (deviceID 0): Cypress
        Name of device #2 / 3 (deviceID 1): Cypress
        Name of device #3 / 3 (deviceID 2): Hawaii


spawning 1 worker thread(s)
[WORKER0] Hello, World!
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
[MASTER] 2014-Feb-11 01:37:17 | work received | sharetarget: 00ffffffffffffffffffffffffffffffffffffffffffffffffffffffbeefde


Messages during compilation of program for device 'Cypress':

LOOP UNROLL: pragma unroll (line 162)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 112)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 179)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 169)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 222)
    Unrolled as requested!

[STATS] 2014-Feb-11 01:37:26 | 888.00 c/m | 0.00 sh/m | VL: 0 (0.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER0] share found: 31769787 <-> 22056509 #1 (292) @ 1392079122
[STATS] 2014-Feb-11 01:37:36 | 888.00 c/m | 3.00 sh/m | VL: 1 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER0] share found: 14050831 <-> 38656591 #2 (350) @ 1392079137
[STATS] 2014-Feb-11 01:37:46 | 880.00 c/m | 4.00 sh/m | VL: 2 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[STATS] 2014-Feb-11 01:37:56 | 891.00 c/m | 3.00 sh/m | VL: 2 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[STATS] 2014-Feb-11 01:38:06 | 873.60 c/m | 2.40 sh/m | VL: 2 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
and this if the other one:
Code: [Select]
C:\clpts-v0.1.4_win_x86-64>clpts_x86-64.exe PcGVSa1S5K7bYjL9BaBaEYzRdFHTwRW6PW -t 1 -a 0
*****************************************************************************
** clpts - OpenCL PTS Pool Miner v0.1.4
** by NaN - based on ptsminer.
** If you like this software, please consider sending tips to: opencl.miner@gmail.com
** PTS:  PtLx9kDLTXtR1ae3u7naXLPeGjjHZ1PGoR
** BTC:  1AumJ5uzz1nuER7pBA6Bh4gNusaxhN85rc
** Your donations will encourage further optimization and development
**
** press CTRL+C to exit
*****************************************************************************
Vendor of used platform (#1 / 1): Advanced Micro Devices, Inc.
        Name of device #1 / 3 (deviceID 0): Cypress
        Name of device #2 / 3 (deviceID 1): Cypress
        Name of device #3 / 3 (deviceID 2): Hawaii


spawning 1 worker thread(s)
[WORKER0] Hello, World!
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
[MASTER] 2014-Feb-11 01:38:58 | work received | sharetarget: 00ffffffffffffffffffffffffffffffffffffffffffffffffffffffbeefde4d


Messages during compilation of program for device 'Cypress':

LOOP UNROLL: pragma unroll (line 162)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 112)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 179)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 169)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 222)
    Unrolled as requested!

[STATS] 2014-Feb-11 01:39:08 | 588.00 c/m | 0.00 sh/m | VL: 0 (0.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER0] share found: 45539184 <-> 65899685 #1 (130) @ 1392079192
[WORKER0] share found: 37439257 <-> 18122184 #2 (228) @ 1392079227
[STATS] 2014-Feb-11 01:39:18 | 684.00 c/m | 6.00 sh/m | VL: 1 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[MASTER] 2014-Feb-11 01:39:20 | work received | sharetarget: 00ffffffffffffffffffffffffffffffffffffffffffffffffffffffbeefde4d
[STATS] 2014-Feb-11 01:39:28 | 736.00 c/m | 4.00 sh/m | VL: 2 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER0] share found: 37708494 <-> 27113780 #3 (384) @ 1392079202
[WORKER0] share found: 67088250 <-> 45650505 #4 (488) @ 1392079242
[STATS] 2014-Feb-11 01:39:38 | 741.00 c/m | 6.00 sh/m | VL: 4 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER0] share found: 31747746 <-> 4911902 #5 (672) @ 1392079289
[STATS] 2014-Feb-11 01:39:48 | 811.20 c/m | 6.00 sh/m | VL: 5 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER0] share found: 32841255 <-> 51560351 #6 (698) @ 1392079295
[WORKER0] share found: 53682091 <-> 49001925 #7 (728) @ 1392079308
[WORKER0] share found: 44389161 <-> 25052278 #8 (778) @ 1392079322
[INFO] 2014-Feb-11 01:39:58 | mining 35s for developer
[STATS] 2014-Feb-11 01:39:58 | 838.00 c/m | 8.00 sh/m | VL: 8 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[STATS] 2014-Feb-11 01:40:08 | 838.29 c/m | 6.86 sh/m | VL: 8 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
aaand everything together:
Code: [Select]
C:\clpts-v0.1.4_win_x86-64>clpts_x86-64.exe PcGVSa1S5K7bYjL9BaBaEYzRdFHTwRW6PW -t 0,1,2 -a 0
*****************************************************************************
** clpts - OpenCL PTS Pool Miner v0.1.4
** by NaN - based on ptsminer.
** If you like this software, please consider sending tips to: opencl.miner@gmail.com
** PTS:  PtLx9kDLTXtR1ae3u7naXLPeGjjHZ1PGoR
** BTC:  1AumJ5uzz1nuER7pBA6Bh4gNusaxhN85rc
** Your donations will encourage further optimization and development
**
** press CTRL+C to exit
*****************************************************************************
Vendor of used platform (#1 / 1): Advanced Micro Devices, Inc.
        Name of device #1 / 3 (deviceID 0): Cypress
        Name of device #2 / 3 (deviceID 1): Cypress
        Name of device #3 / 3 (deviceID 2): Hawaii


spawning 3 worker thread(s)
[WORKER0] Hello, World!
[WORKER2] Hello, World!
[WORKER1] Hello, World!
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
[MASTER] 2014-Feb-11 01:40:48 | work received | sharetarget: 00ffffffffffffffffffffffffffffffffffffffffffffffffffffffbeefde4d


Messages during compilation of program for device 'Hawaii':

LOOP UNROLL: pragma unroll (line 162)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 112)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 179)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 169)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 222)
    Unrolled as requested!

WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!


Messages during compilation of program for device 'Cypress':

LOOP UNROLL: pragma unroll (line 162)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 112)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 179)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 169)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 222)
    Unrolled as requested!

WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!


Messages during compilation of program for device 'Cypress':

LOOP UNROLL: pragma unroll (line 162)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 112)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 179)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 169)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 222)
    Unrolled as requested!

[WORKER2] share found: 1668375 <-> 8285825 #1 (314) @ 1392079370
[STATS] 2014-Feb-11 01:40:58 | 1944.00 c/m | 6.00 sh/m | VL: 1 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER1] share found: 8344346 <-> 38694816 #2 (328) @ 1392079330
[WORKER0] share found: 13636221 <-> 3287609 #3 (390) @ 1392079359
[WORKER2] share found: 46169116 <-> 59165253 #4 (396) @ 1392079391
[WORKER2] share found: 15325802 <-> 10509091 #5 (472) @ 1392079412
[STATS] 2014-Feb-11 01:41:08 | 2292.00 c/m | 15.00 sh/m | VL: 5 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER1] share found: 47653015 <-> 26438904 #6 (856) @ 1392079471
[WORKER1] share found: 18482529 <-> 59748789 #7 (870) @ 1392079474
[STATS] 2014-Feb-11 01:41:18 | 2460.00 c/m | 14.00 sh/m | VL: 7 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER1] share found: 30990259 <-> 14285902 #8 (1372) @ 1392079612
[WORKER2] share found: 18936802 <-> 35523611 #9 (1394) @ 1392079688
[WORKER2] share found: 43732581 <-> 30094639 #10 (1556) @ 1392079739
[STATS] 2014-Feb-11 01:41:28 | 2469.00 c/m | 15.00 sh/m | VL: 10 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER0] share found: 46194975 <-> 37060684 #11 (1662) @ 1392079713
[WORKER1] share found: 3000725 <-> 46534740 #12 (1814) @ 1392079732
[STATS] 2014-Feb-11 01:41:38 | 2529.60 c/m | 14.40 sh/m | VL: 12 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER1] share found: 43963157 <-> 39575243 #13 (2340) @ 1392079873
[WORKER1] share found: 39575243 <-> 43963157 #14 (2340) @ 1392079873
[WORKER0] share found: 42249946 <-> 12144704 #15 (2468) @ 1392079923
[WORKER1] share found: 15250890 <-> 29643259 #16 (2518) @ 1392079918
[INFO] 2014-Feb-11 01:41:48 | mining 35s for developer
[STATS] 2014-Feb-11 01:41:48 | 2590.00 c/m | 16.00 sh/m | VL: 16 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER1] share found: 21633480 <-> 54256048 #17 (2882) @ 1392080020
[MASTER] 2014-Feb-11 01:41:55 | work received | sharetarget: 00ffffffffffffffffffffffffffffffffffffffffffffffffffffffbeefde4d
[STATS] 2014-Feb-11 01:41:58 | 2629.71 c/m | 14.57 sh/m | VL: 17 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER1] share found: 64748704 <-> 47392596 #18 (3112) @ 1392079357
[WORKER1] share found: 55495297 <-> 28938951 #19 (3440) @ 1392079459
[STATS] 2014-Feb-11 01:42:08 | 2604.00 c/m | 14.25 sh/m | VL: 19 (100.00%), RJ: 0 (0.00%), ST: 0 (0.00%)
[WORKER2] share found: 65895148 <-> 1773391 #20 (3528) @ 1392079496
[WORKER0] share found: 58584626 <-> 457199 #21 (3668) @ 1392079524
Am I doing something wrong?
Please help me :(

Pages: [1]

Page created in 0.029 seconds with 24 queries.