Author Topic: mmcpool.com - CLOUD MINING GUIDE!  (Read 12610 times)

0 Members and 1 Guest are viewing this topic.

Offline jpeggt

  • Newbie
  • *
  • Posts: 15
    • View Profile
Re: mmcpool.com - CLOUD MINING GUIDE!
« Reply #15 on: December 26, 2013, 12:22:33 pm »
That didn't help. What instanse did you choose?

I've got it to run on the free t1.micro instance (added a 1GB volume as swap) it useless for mining but it was working. I've also got it running on large instances just fine.

What I did (based off the original instructions from itsik78)
Created the instance, selecting Ubuntu 13.10 64-bit and everything else at defaults.

If your getting that far I assume you can ssh into the machine fine.

once connected I entered this, and only this and it will run:

Code: [Select]
mkdir mmcpool
cd mmcpool
sudo apt-get install -y make gcc m4 automake libevent-dev zlibc zlib1g-dev libjansson-dev libcurl4-openssl-dev git autoconf g++
git clone https://github.com/glitchman/mmcminer
cd mmcminer
./autogen.sh
./configure CFLAGS="-O3"
make
./minerd --url http://work.mmcpool.com --user [yourWalletAddress] --threads [number]

If that works you can then create a run.sh file like the previous instructions say and either use nohup or personally I prefer to use tmux.

to use tmux just type tmux, you will then enter a tmux session, you can run the "run.sh" command, then hit CTRL+B then "d" to exit the session, everything inside will still be running once you disconnect from ssh. To get back into your tmux session type "tmux attach"

Offline Firefly

  • Newbie
  • *
  • Posts: 13
    • View Profile
Re: mmcpool.com - CLOUD MINING GUIDE!
« Reply #16 on: December 26, 2013, 12:29:14 pm »
Thank you,  jpeggt!
I'll try to do what you've said.

Offline itsik78

  • Sr. Member
  • ****
  • Posts: 297
    • View Profile
Re: mmcpool.com - CLOUD MINING GUIDE!
« Reply #17 on: December 26, 2013, 12:38:55 pm »
Ubuntu 13.10 x64........DigitalOcean Droplet

After I pasted above code (with appropriate core values) and pressed Enter after all done, I am getting following error:

"/usr/local/mmcminer# nohup: ignoring input and appending output to ‘nohup.out’"

then it just stops there and if I press any key, it goes back to command prompt.

I am new to Linux...........help will be appreciated.

EDIT:
If I run directly run minerd........then I am getting following error:

"[05:52:45] 2 miner threads started, using MMC Momentum Proof-of-Work algorithm.
Segmentation fault (core dumped)"

Sorry, I should've been clearer.
When you run the last line, it runs the miner in the background.
You can see the progress in the nohup.out file.
Use "
Code: [Select]
less nohup.out" then press shift+f to watch the live progress.

Offline salvo0097

  • Jr. Member
  • **
  • Posts: 24
    • View Profile
Re: mmcpool.com - CLOUD MINING GUIDE!
« Reply #18 on: December 26, 2013, 12:42:37 pm »
HTTP request failed: The requested URL returned error: 401
json_rpc_call failed, retry after 10 seconds


What do I do ?

Offline kbhutto

  • Jr. Member
  • **
  • Posts: 27
    • View Profile
Re: mmcpool.com - CLOUD MINING GUIDE!
« Reply #19 on: December 26, 2013, 12:43:44 pm »
Ubuntu 13.10 x64........DigitalOcean Droplet

After I pasted above code (with appropriate core values) and pressed Enter after all done, I am getting following error:

"/usr/local/mmcminer# nohup: ignoring input and appending output to ‘nohup.out’"

then it just stops there and if I press any key, it goes back to command prompt.

I am new to Linux...........help will be appreciated.

EDIT:
If I run directly run minerd........then I am getting following error:

"[05:52:45] 2 miner threads started, using MMC Momentum Proof-of-Work algorithm.
Segmentation fault (core dumped)"

Sorry, I should've been clearer.
When you run the last line, it runs the miner in the background.
You can see the progress in the nohup.out file.
Use "
Code: [Select]
less nohup.out" then press shift+f to watch the live progress.

Still getting Segmentation fault (core dumped) error:

"./minerd --url http://work.mmcpool.com --user <addresshere> --threads 2
./run.sh: line 2: 21546 Segmentation fault (core dumped) "


Offline itsik78

  • Sr. Member
  • ****
  • Posts: 297
    • View Profile
Re: mmcpool.com - CLOUD MINING GUIDE!
« Reply #20 on: December 26, 2013, 12:58:24 pm »
Ubuntu 13.10 x64........DigitalOcean Droplet

After I pasted above code (with appropriate core values) and pressed Enter after all done, I am getting following error:

"/usr/local/mmcminer# nohup: ignoring input and appending output to ‘nohup.out’"

then it just stops there and if I press any key, it goes back to command prompt.

I am new to Linux...........help will be appreciated.

EDIT:
If I run directly run minerd........then I am getting following error:

"[05:52:45] 2 miner threads started, using MMC Momentum Proof-of-Work algorithm.
Segmentation fault (core dumped)"

Sorry, I should've been clearer.
When you run the last line, it runs the miner in the background.
You can see the progress in the nohup.out file.
Use "
Code: [Select]
less nohup.out" then press shift+f to watch the live progress.

Still getting Segmentation fault (core dumped) error:

"./minerd --url http://work.mmcpool.com --user <addresshere> --threads 2
./run.sh: line 2: 21546 Segmentation fault (core dumped) "


You probably have 2 instances of the miner running, or maybe you chose a low memory machine. I don't know how much memory this miner needs, it could be more than 1GB.

Offline salvo0097

  • Jr. Member
  • **
  • Posts: 24
    • View Profile
Re: mmcpool.com - CLOUD MINING GUIDE!
« Reply #21 on: December 26, 2013, 01:06:53 pm »
HTTP request failed: The requested URL returned error: 401
json_rpc_call failed, retry after 10 seconds


What do I do ?

Offline kbhutto

  • Jr. Member
  • **
  • Posts: 27
    • View Profile
Re: mmcpool.com - CLOUD MINING GUIDE!
« Reply #22 on: December 26, 2013, 02:04:44 pm »
Ubuntu 13.10 x64........DigitalOcean Droplet

After I pasted above code (with appropriate core values) and pressed Enter after all done, I am getting following error:

"/usr/local/mmcminer# nohup: ignoring input and appending output to ‘nohup.out’"

then it just stops there and if I press any key, it goes back to command prompt.

I am new to Linux...........help will be appreciated.

EDIT:
If I run directly run minerd........then I am getting following error:

"[05:52:45] 2 miner threads started, using MMC Momentum Proof-of-Work algorithm.
Segmentation fault (core dumped)"

Sorry, I should've been clearer.
When you run the last line, it runs the miner in the background.
You can see the progress in the nohup.out file.
Use "
Code: [Select]
less nohup.out" then press shift+f to watch the live progress.

Still getting Segmentation fault (core dumped) error:

"./minerd --url http://work.mmcpool.com --user <addresshere> --threads 2
./run.sh: line 2: 21546 Segmentation fault (core dumped) "


You probably have 2 instances of the miner running, or maybe you chose a low memory machine. I don't know how much memory this miner needs, it could be more than 1GB.

Just performed Shutdown/Reset.........now its working. I think you are right that there were 2 instances.

Right now I am on 2 Core droplet....getting only 0.266 hpm.....is it normal? I plan to upgrade it.

Offline smokim11

  • Sr. Member
  • ****
  • Posts: 217
    • View Profile
Re: mmcpool.com - CLOUD MINING GUIDE!
« Reply #23 on: December 26, 2013, 02:09:39 pm »
I tried doing this but doesn't work, I checked the cpu usage and it seems to go to a 100% then to 0 and a few minutes later the same thing.

How do I delete everything and just install it manually?
If I helped you and want to show your appreciation donate any amount:
Pjem2V2FDPGZa6yAvpL2fN5yZKXYUNLSv5

Offline itsik78

  • Sr. Member
  • ****
  • Posts: 297
    • View Profile
Re: mmcpool.com - CLOUD MINING GUIDE!
« Reply #24 on: December 26, 2013, 02:24:44 pm »
I tried doing this but doesn't work, I checked the cpu usage and it seems to go to a 100% then to 0 and a few minutes later the same thing.

How do I delete everything and just install it manually?

Try looking into the nohup.out file (less nohup.out + shift+f) to see what's going on.
Don't use Micro instances or very low memory ones

Offline badbonez

  • Full Member
  • ***
  • Posts: 50
    • View Profile
Re: mmcpool.com - CLOUD MINING GUIDE!
« Reply #25 on: December 26, 2013, 05:50:07 pm »
So here's what I've done to get this working on Digital Ocean, Windows Azure and Joyent servers:

Code: [Select]
sudo apt-get update

sudo apt-get install -y git make g++ build-essential libminiupnpc-dev libdb++-dev libgmp-dev libssl-dev dos2unix libboost-all-dev autoconf libcurl4-openssl-dev

git clone https://github.com/glitchman/mmcminer

cd mmcminer

sudo apt-get install automake libcurl4-gnutls-dev

./autogen.sh

./configure CFLAGS="-O3"

make

./minerd --url http://work.mmcpool.com --user MLzSj31GVDqYLstZjFFqoGjafhiGz5FkRo --threads 8


Change the address to your address and the threads to the number of threads you are using.

Windows Azure 8 CPU = ~.9 h/m
Digital Ocean 8 CPU = ~ .4 h/m
Joyent 8 CPU = ~ 2 h/m

Funny thing though, the Digital Ocean 2 CPU droplet gets almost .3 h/m - and at .003/hr, that's your best value long term.  Although everything has been rejected so far, so maybe it's not such a good deal.

NOTE:  I am a linux noob, really have no idea what I'm doing.  I just tried different suggestions from other posters in this thread and found a sequence that works.  YMMV.
« Last Edit: December 26, 2013, 06:04:49 pm by badbonez »
MMC: MQ4EA85nnZwytrcqx9rJSpDWVTSXaxfqmc

Offline badbonez

  • Full Member
  • ***
  • Posts: 50
    • View Profile
Re: mmcpool.com - CLOUD MINING GUIDE!
« Reply #26 on: December 26, 2013, 05:54:03 pm »
What does this mean?

Code: [Select]
[11:21:32] 2 miner threads started, using MMC Momentum Proof-of-Work algorithm.
[11:22:03] Found solution - 1080 / 1968 / 2698089430
[11:24:55] Stats: 0.294 hash/min
[11:28:20] Stats: 0.296 hash/min
[11:28:34] Found solution - 241 / 1968 / 1690061022
[11:31:02] Found solution - 14593 / 1968 / 380243741
[11:31:44] Stats: 0.297 hash/min
[11:31:59] Found solution - 8428 / 1968 / 1734601141
[11:32:38] Found solution - 1848 / 1968 / 2972320753
[11:35:09] Stats: 0.297 hash/min
[11:35:20] Found solution - 90 / 1968 / 161908279
[11:38:34] Stats: 0.297 hash/min
[11:41:50] Found solution - 7761 / 1968 / 43954557
[11:42:02] Stats: 0.297 hash/min
[11:45:26] Stats: 0.298 hash/min
[11:47:49] Found solution - 13929 / 1968 / 2871703692
[11:48:48] Found share ...18d46090654a0430: submitting
[11:48:48] Stats: 0.298 hash/min
[11:48:53] PROOF OF WORK RESULT: Rejected
[11:52:04] Found solution - 7547 / 1968 / 3629289288
[11:52:20] Stats: 0.294 hash/min
[11:55:46] Stats: 0.294 hash/min
[11:59:10] Stats: 0.293 hash/min
[12:02:38] Stats: 0.298 hash/min
[12:06:07] Stats: 0.294 hash/min
[12:09:36] Stats: 0.291 hash/min
[12:10:57] Found solution - 11136 / 1968 / 3515722300
[12:13:03] Stats: 0.296 hash/min
[12:15:07] Found solution - 4911 / 1968 / 1893626831
[12:16:27] Found share ...5f04cd458ecd972e: submitting
[12:16:27] Stats: 0.296 hash/min
[12:16:27] PROOF OF WORK RESULT: Rejected
[12:19:50] Stats: 0.296 hash/min
[12:23:18] Stats: 0.292 hash/min
[12:24:24] Found solution - 10591 / 1968 / 14722915
[12:26:44] Stats: 0.295 hash/min
[12:30:10] Stats: 0.295 hash/min
[12:33:04] Found solution - 6858 / 1968 / 1597691035
[12:33:39] Found share ...4d0971504e1a006b: submitting
[12:33:39] Stats: 0.293 hash/min
[12:33:42] PROOF OF WORK RESULT: Rejected
[12:37:08] Stats: 0.295 hash/min
[12:37:45] Found solution - 1128 / 1968 / 1657385483
[12:39:18] Found solution - 13116 / 1968 / 2158745537
[12:40:40] Found share ...95a48c3e37802151: submitting
[12:40:40] Stats: 0.288 hash/min
[12:40:42] PROOF OF WORK RESULT: Rejected
[12:41:19] Found solution - 9404 / 1968 / 2228677389
[12:41:33] Found solution - 10004 / 1968 / 2798713803
[12:42:00] Found solution - 11121 / 1968 / 1966842913
[12:42:03] Found solution - 3013 / 1968 / 256258272
[12:44:07] Found share ...e5c65f9a47b6d00a: submitting
[12:44:07] Stats: 0.295 hash/min
[12:46:15] PROOF OF WORK RESULT: Rejected
[12:49:39] Stats: 0.294 hash/min


Everything is being rejected?

Thanks.
MMC: MQ4EA85nnZwytrcqx9rJSpDWVTSXaxfqmc

Offline Firefly

  • Newbie
  • *
  • Posts: 13
    • View Profile
Re: mmcpool.com - CLOUD MINING GUIDE!
« Reply #27 on: December 27, 2013, 11:42:07 am »
So, guys, can you write some manual for mining in http://joyent.com?
They have free $130 for trial. I didn't get how to login in the instance via ssh (using Cygwin). It asks some password that I dont know.

Offline badbonez

  • Full Member
  • ***
  • Posts: 50
    • View Profile
Re: mmcpool.com - CLOUD MINING GUIDE!
« Reply #28 on: December 27, 2013, 06:26:42 pm »
So, guys, can you write some manual for mining in http://joyent.com?
They have free $130 for trial. I didn't get how to login in the instance via ssh (using Cygwin). It asks some password that I dont know.

When you create an instance, you need to create a private key.  Download puttygen.exe to creat a public key and use that in Putty.

As for loading the miner, my guide three posts up should work as long as you select Unbutu as your OS.

Note that the $130 credit is $65 per month for two months.
MMC: MQ4EA85nnZwytrcqx9rJSpDWVTSXaxfqmc

Offline caliboy

  • Jr. Member
  • **
  • Posts: 20
    • View Profile
Re: mmcpool.com - CLOUD MINING GUIDE!
« Reply #29 on: December 27, 2013, 06:38:44 pm »
i tried joyent and i got banned! I think they watch over cpu usage. Because i cant find any mistake what i done! :o
MMC: MR4nRqjYcqKpWje3oc3WnAUjHMVCugMUNf