AMD OpenCL Momentum miner

[morecpmplz]

Will it work on 32bit llinux? I can not launch it on my bamt. Please, do not ignore me.

In the readme under todo he has listed 32bit version so most likely no.

[vasyabit]

Will it work on 32bit llinux? I can not launch it on my bamt. Please, do not ignore me.

[morecpmplz]

If you wanna install the Catalyst driver on Ubuntu, then please use the following guide: http://wiki.cchtml.com/index.php/Ubuntu_Saucy_Installation_Guide
Make sure that you run sudo aticonfig --adapter=all --initial after the installation and reboot after that. --buildpkg Ubuntu/saucy has to be replaced by the name of your Ubuntu distro e.g. --buildpkg Ubuntu/raring.

I find installing 13.12 from the repos to be a much simpler task.

Code: [Select]

sudo apt-get install fglrx-updates fglrx-amdcccle-updates fglrx-updates-dev
aticonfig --lsa
sudo aticonfig --adapter=all --initial
sudo reboot

[joroseksa]

Hi guys,
I'd like to ask a question about the r9 290x video cards.

1. What is the difference in c/m between 290x and 290
2. Why some 290x cost 800 USD but others just 440 - 600 USD. Is there a difference in c/m between ASUS that cost 800 USD and SAPHIRE that cost 500 USD?

10x in advance

[NaN]

If you wanna install the Catalyst driver on Ubuntu, then please use the following guide: http://wiki.cchtml.com/index.php/Ubuntu_Saucy_Installation_Guide
Make sure that you run sudo aticonfig --adapter=all --initial after the installation and reboot after that. --buildpkg Ubuntu/saucy has to be replaced by the name of your Ubuntu distro e.g. --buildpkg Ubuntu/raring.

[battleaxe]

@battleaxe: Your GPU is not recognized by the OpenCL implementation. I guess that the easiest way to fix the driver is to do a clean install of Ubuntu and after that only install the Catalyst driver 13.12 WITHOUT the APP SDK. To install the driver you have to download the driver from the AMD website and create a package for your Ubuntu version. After that install the packet using apt-get.

Your fix not work. Same truble with no connected display to videocard (likely X-Server not start). Rig controled via RDP. If connect display on start-> no this errors. Without display ati --odg not work, but cgminer work (with ADL and temp control).

Having trouble understanding this. Can someone help understand his English? Right now I'm reinstalling Ubuntu fresh. Gonna try that.

[pve]

@battleaxe: Your GPU is not recognized by the OpenCL implementation. I guess that the easiest way to fix the driver is to do a clean install of Ubuntu and after that only install the Catalyst driver 13.12 WITHOUT the APP SDK. To install the driver you have to download the driver from the AMD website and create a package for your Ubuntu version. After that install the packet using apt-get.

Your fix not work. Same truble with no connected display to videocard (likely X-Server not start). Rig controled via RDP. If connect display on start-> no this errors. Without display ati --odg not work, but cgminer work (with ADL and temp control).

[NoVaMiner]

Yeah, it's definitely not a restriction of the miner. The next version will introduce multi-pool support and pool fall-back together with a config file so those issues should vanish

I can't wait NaN, that is great news. yPool has been getting killed.  I don't know if they are getting attacked or it's just the load.  Things have been really unstable since they pushed past 20Mc/m.

[Darkbane]

when i put -t 0,0,1,1,2,2 .. the miner always crash

what GPU is your monitor plugged into... try running only one thread on that GPU... have you undervolted the cards? have you overclocked the cards?

i think its on my first gpu? how can i know that where did i plugged it?

yes my cards is undervolted

overlocked? no its not bcoz i didnt know how

If you have undervolted your video card, that is the MOST likely reason why the miner keeps crashing when trying to run multiple threads as it requires more power, but you can't provide it since you've lowered the voltage, the display drivers stop working and the miner does as a result... or one card will stop working while the others continue to run... I went through that exact experience when I was trying to find the best voltage to use... you simply need to increase the voltage on each card until you no longer have this problem.... each card may be slightly different with voltage requirements, but I would recommend raising all of them to an equal amount...

[marcolecorse]

Re

Very Good NaN Configure Rig

3 R9 290= 9700 cpm

possible Overclok via ubuntu ?

[NaN]

Yeah, it's definitely not a restriction of the miner. The next version will introduce multi-pool support and pool fall-back together with a config file so those issues should vanish

[CoRpO]

I've ran into an issue with 0.2.2 (Didn't test with previous versions) : I can't launch more than 8 threads inside one clpts, have to launch 2 times. Seems related to the lenght of the command line, when I put more than 8 threads, clpts can't authenticate (showing me a weird one char login).

My login is 8 chars, my password 1 char.

Probably a minor issue but if you can have a look, it's probably a 30s fix

Thank you

NaN, did you see this message ?

[visterln]

YES
Please add the URL command software supports any mineral pool bar I used http://ptspool.com/ better in China, YPOOL too many people often go wrong, BEEEER people too little too out of the blocks, it is like this software is currently the fastest Please join command the support of other mineral pool bar

[zvs]

here's example of why other miner  that allows more pool options is better:

Code: [Select]

collisions/min: 3710.0000 Shares total: 18
collisions/min: 3705.9091 Shares total: 18
Share found! (Blockheight: 54606)
collisions/min: 3698.2609 Shares total: 19
Share found! (Blockheight: 54606)
collisions/min: 3700.6250 Shares total: 20
collisions/min: 3701.6000 Shares total: 20
collisions/min: 3699.0385 Shares total: 20
New block data - height: 54607 tx count: 8
collisions/min: 3691.1111 Shares total: 20
Share found! (Blockheight: 54607)
collisions/min: 3690.7143 Shares total: 21
collisions/min: 3696.5517 Shares total: 21
collisions/min: 3699.5000 Shares total: 21
collisions/min: 3693.5484 Shares total: 21
Share found! (Blockheight: 54607)
collisions/min: 3692.6562 Shares total: 22
Share found! (Blockheight: 54607)
collisions/min: 3689.5455 Shares total: 23
collisions/min: 3691.0294 Shares total: 23
Share found! (Blockheight: 54607)
collisions/min: 3695.4286 Shares total: 24
Share found! (Blockheight: 54607)
Share found! (Blockheight: 54607)
collisions/min: 3697.5000 Shares total: 26
New block data - height: 54608 tx count: 8
collisions/min: 3703.9189 Shares total: 26
Share found! (Blockheight: 54608)
Share found! (Blockheight: 54608)
Share found! (Blockheight: 54608)
collisions/min: 3711.1842 Shares total: 29
Share found! (Blockheight: 54608)
Share found! (Blockheight: 54608)
collisions/min: 3705.3846 Shares total: 31
Share found! (Blockheight: 54608)
New block data - height: 54609 tx count: 1
collisions/min: 3713.7500 Shares total: 32
Share found! (Blockheight: 54609)
Invalid share
Reason: Share is outdated
Invalid share
Reason: Share is outdated
Invalid share
Reason: Share is outdated
Invalid share
Reason: Share is outdated
Invalid share
Reason: Share is outdated
Invalid share
Reason: Share is outdated
Invalid share
Reason: Share is outdated
Ping 27982.1ms (Average 14096.0)
Invalid share
Reason: Share is outdated
Invalid share
Reason: Share is outdated
Invalid share
Reason: Share is outdated
Invalid share
Reason: Share is outdated
collisions/min: 3714.3902 Shares total: 33
Share found! (Blockheight: 54609)
Share found! (Blockheight: 54609)
collisions/min: 3711.0714 Shares total: 35
i have constant ping to my server in germany @ 167ms at same time

[vasyabit]

Id does not work on 32bit linux bamt, right?