Author Topic: New YAM version release  (Read 165530 times)

0 Members and 1 Guest are viewing this topic.

Offline sandor111

  • Newbie
  • *
  • Posts: 10
    • View Profile
Binding the process to each physical socket performs roughly the same as taskset

Offline yvg1900

  • Full Member
  • ***
  • Posts: 198
    • View Profile
  • BitShares: yvg1900
Dual L5639 CONFIG:
 :P

mmc.sh
Code: [Select]
#!/bin/bash
echo always > /sys/kernel/mm/transparent_hugepage/enabled;
killall -9 yam;
killall -9 screen;
screen -mD taskset -c 0-11 ~/yam --config yam-mmc.cfg &
screen -mD taskset -c 12-23 ~/yam --config yam-mmc2.cfg &

yam-mmc.fg
Code: [Select]
threads = 12
mining-params = mmc:av=1&aesni=on&donation-interval=100&m=12288
mine = getwork://M869Fke4cHqJnUVZRvhdMHe45JW1pLprof@work.mmcpool.com:8880:8881:8882:8883/mmc
compact-stats = 0
print-timestamps = 0

yam-mmc2.cfg
Code: [Select]
threads = 12
mining-params = mmc:av=1&aesni=on&donation-interval=100&m=12288
mine = getwork://M869Fke4cHqJnUVZRvhdMHe45JW1pLprof@work.mmcpool.com:8880:8881:8882:8883/mmc
compact-stats = 0
print-timestamps = 0

Start--
Code: [Select]
chmod +x mmc.sh;./mmc.sh;

This assumes that you only have 24GB and occupying less than 1GB RAM.
uses Screen and taskset.

12.5+ H/m

--Nehalem core

If your OS supports NUMA and numactl, it is better to bind tasks to phys sockets using

numactl -N 0 -m 0 -- ./yam -c yam-mmc-0.cfg
numactl -N 1 -m 1 -- ./yam -c yam-mmc-1.cfg

Using taskset leaves open possibility of cross-socket memory allocation, which causes major underperformance.

Follow @yvg1900 on Twitter for yam miner updates and support

Offline yvg1900

  • Full Member
  • ***
  • Posts: 198
    • View Profile
  • BitShares: yvg1900
I notice that the new version doesnt have a constant 99.9-100% peg on each thread, it fluctuates alot between 92-98 on each threads and rarely pegs at 99.9-100%

Is this by design, surely such fluctuations would kill extra hashrate ?

That would be the case if you use m=1024 and many threads. In this case mining will suffer from inter-thread sync contention.

Max perf can be obtained when m=1024*numberOfThreads, which is exactly the config from prev version.
Follow @yvg1900 on Twitter for yam miner updates and support

Offline Delinquency

  • Sr. Member
  • ****
  • Posts: 370
    • View Profile
Dual L5639 CONFIG:
 :P

mmc.sh
Code: [Select]
#!/bin/bash
echo always > /sys/kernel/mm/transparent_hugepage/enabled;
killall -9 yam;
killall -9 screen;
screen -mD taskset -c 0-11 ~/yam --config yam-mmc.cfg &
screen -mD taskset -c 12-23 ~/yam --config yam-mmc2.cfg &

yam-mmc.fg
Code: [Select]
threads = 12
mining-params = mmc:av=1&aesni=on&donation-interval=100&m=12288
mine = getwork://M869Fke4cHqJnUVZRvhdMHe45JW1pLprof@work.mmcpool.com:8880:8881:8882:8883/mmc
compact-stats = 0
print-timestamps = 0

yam-mmc2.cfg
Code: [Select]
threads = 12
mining-params = mmc:av=1&aesni=on&donation-interval=100&m=11264
mine = getwork://M869Fke4cHqJnUVZRvhdMHe45JW1pLprof@work.mmcpool.com:8880:8881:8882:8883/mmc
compact-stats = 0
print-timestamps = 0

Start--
Code: [Select]
chmod +x mmc.sh;./mmc.sh;

This assumes that you only have 24GB and occupying less than 1GB RAM.
uses Screen and taskset.

12.5+ H/m

--Nehalem core ++Fixed RAM on the second config.
« Last Edit: January 28, 2014, 02:33:31 pm by Delinquency »

Offline sandor111

  • Newbie
  • *
  • Posts: 10
    • View Profile
Seems to perform worse than previous miner on dual L5639 :(
Code: [Select]
threads = 24
mining-params = mmc:av=0&aesni=on&m=22528&donation-interval=100

Offline bppsp1

  • Full Member
  • ***
  • Posts: 87
    • View Profile
Been playing around with new k version and noticed few things.

1.) k version ART dropped from previous version 59000 down to 1500 , thats a huge drop not sure what benefits it would give.
2.) k version SPM/HPM is lower on sandy-bridge than on j version using AV=1 (havnt tried all, but AV=1 always turned out fastest in previous version)
3.) k version using different m: values doesnt seem to make any difference at all.
4.) k version fluctuate between 90-100% usage on each thread all the time where the j version pegged to 99.9-100% all the time.

Offline bppsp1

  • Full Member
  • ***
  • Posts: 87
    • View Profile
I notice that the new version doesnt have a constant 99.9-100% peg on each thread, it fluctuates alot between 92-98 on each threads and rarely pegs at 99.9-100%

Is this by design, surely such fluctuations would kill extra hashrate ?

Offline andhar

  • Board Moderator
  • Sr. Member
  • *****
  • Posts: 241
  • *BOH!*
    • View Profile
That's what i thought but the miner just closes. Early in the morning so i must be doing something wrong here.

emre

  • Guest
What version should i use for a i5-3570?

Don't got the K version.

ivy bridge.

you can learn your cpu's architecture by googling "[CPU MODEL] micro architecture".

Offline andhar

  • Board Moderator
  • Sr. Member
  • *****
  • Posts: 241
  • *BOH!*
    • View Profile
What version should i use for a i5-3570?

Don't got the K version.

emre

  • Guest
thanks.

getting ~10 HPM with my 24 core XEON L5639.

Offline luckye

  • Newbie
  • *
  • Posts: 19
    • View Profile
Updated M7k version of yam miner is available. It contains reduced memory mode for MMC, improved performance and connection stability.
M7k version of yam allows efficient CPU mining of MemoryCoin with all threads even with 1Gb RAM used for mining.
yam M7k runs significantly faster on AVX2 CPUs (Haswell) and has improved CPU load profile for overclocked configurations.
yam M7k fixes disconnect issues with some MMC mining pools that use get work protocol.

As usual, download at
https://www.dropbox.com/sh/jvp4wwek8jpohj7/RlW6hzYqTz
https://mega.co.nz/#F!h0tkXSxZ!f62uoUXogkxQmP2xO8Ib-g
http://sdrv.ms/18wfjYX
http://pan.baidu.com/s/1xOOWa

yvg1900

Great work !!!

What version do you suggest to using with a westmere-ep cpu ? I'm currently using the nehalem one
« Last Edit: January 27, 2014, 10:28:35 am by luckye »

Offline itsik78

  • Sr. Member
  • ****
  • Posts: 297
    • View Profile
Thank you! This is great.
I see that that minimum memory per thread for MMC is still 1024 so I didn't understand what you mean by "It contains reduced memory mode for MMC".
I see that it's the total memory used now.

Thanks!
« Last Edit: January 27, 2014, 08:46:21 am by itsik78 »

Offline yvg1900

  • Full Member
  • ***
  • Posts: 198
    • View Profile
  • BitShares: yvg1900
Updated M7k version of yam miner is available. It contains reduced memory mode for MMC, improved performance and connection stability.
M7k version of yam allows efficient CPU mining of MemoryCoin with all threads even with 1Gb RAM used for mining.
yam M7k runs significantly faster on AVX2 CPUs (Haswell) and has improved CPU load profile for overclocked configurations.
yam M7k fixes disconnect issues with some MMC mining pools that use get work protocol.

As usual, download at
https://www.dropbox.com/sh/jvp4wwek8jpohj7/RlW6hzYqTz
https://mega.co.nz/#F!h0tkXSxZ!f62uoUXogkxQmP2xO8Ib-g
http://sdrv.ms/18wfjYX
http://pan.baidu.com/s/1xOOWa

yvg1900
Follow @yvg1900 on Twitter for yam miner updates and support