Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - FuLl

Pages: 1 2 3 4 5 [6] 7
Technical Support / Re: How would I do an asset distribution?
« on: September 16, 2014, 06:53:53 am »
By sharedropping tokens (at launch or at some other predefined date--dictated by you) you are giving a stake in your project to the holders of PTS/AGS and any other coin upon launch because you believe they will offer value to your services' bid for greatness.

What exactly would I have to do to do that? Is there an address each for these 2 tokens where I would send NFS? If so, where would I find them?

or because he is trying to point out something you did and shouldn't have done... he's generally a pretty good (though blunt) chap though.  :)

What did I do that I shouldn't have done? Does he think my username is someone else trying to start a new identity? I'm just a guy new to BitShares, trying to do this right the first time.

I can run 'taskkill /f /im BitSharesX.exe', but it kills the process rather than closing the app.

Then I have to reset the database each time it starts again. Less than ideal.


The Social Contract:

Total of 4,000,000 LND shares distributed as follows:

25% PTS

25% AGS

40% Market

10% Dev

What does it mean when you say that these percentages are going to AGS & PTS?

If I issue an asset, would it increase value if I were to do the same distribution split? How would I send 25% to AGS & PTS?

I started a thread elsewhere to try to find out how to do a distribution of assets, but the only person responding is ridiculing me for the question being too stupid.

Would someone kindly explain this to me please?


Most every time my Acronis TrueImage backup starts every night, it completely freezes my computer & requires me to press & hold the power button to shut it down & restart it. It only happens if the BitSharesX client is running when the backup starts.

I can have Acronis run a batch file before the task starts, & I'd like to know how to close the client that way so this doesn't keep happening.

Is there a command to shut it down cleanly?

Please advise.


Technical Support / Re: How would I do an asset distribution?
« on: September 16, 2014, 02:03:35 am »
Why did you change you handle?

What are you referring to? I registered as FuLl originally. Am I misunderstanding what you mean?

Sorry, Chicken-brain-nes must be more widely spread, than my models suggested...

...I will update the models , if those findings are confirmed...

...In the meanwhile, are you positive you do not have wings and a real good eye site?

I don't get what this guy's all about here.

Would someone kindly help me with my original question, please?

Technical Support / Problems installing bitsharesx on Debian Wheezy
« on: September 15, 2014, 07:32:09 pm »

I'm attempting to build bitsharesx on Debian 7 using a self-compliled 'modular-boost' because the libboost-all-dev included in the repos are too old to meet the dependency requirements.

I've built modular boost from these instructions here:

...opting to build each library separately using the './b2' command rather than the './b2 headers' command, as it failed with the same error when I did that the first time.

Boost built properly once I upgraded my EC2 instance to one with an appropriate amount of memory (the build process hung for 20 hours on a free tier instance with just 512 MB of memory).

In the ~/bitsharesx directory, I try both 'cmake .' & 'cmake -DBoost_LIBRARY_DIR:PATH=/home/username/modular-boost/libs .', & I get the same error either way.

The output I get is:

Code: [Select]
-- Using custom FindBoost.cmake
    CMake Error at libraries/fc/CMakeModules/FindBoost.cmake:1129 (message):
      Unable to find the requested Boost libraries.
      Boost version: 1.55.0
      Boost include path: /usr/include
      The following Boost libraries could not be found:
      No Boost libraries were found.  You may need to set BOOST_LIBRARYDIR to the
      directory containing Boost libraries or BOOST_ROOT to the location of
     Call Stack (most recent call first):
      libraries/fc/CMakeLists.txt:68 (FIND_PACKAGE)
    -- Finished fc module configuration...
    -- Using  as BerkeleyDB root
    -- Looking for: db_cxx-6.0
    -- debug/usr/lib/x86_64-linux-gnu/libdb_cxx.sooptimized/usr/lib/x86_64-linux-gnu/
    -- Found BerkeleyDB: /usr/include
    -- Enabling Bitcoin Core Wallet Imports
    -- Could NOT find Curses (missing:  CURSES_LIBRARY CURSES_INCLUDE_PATH)
    -- Configuring incomplete, errors occurred!
    See also "/home/admin/bitsharesx/CMakeFiles/CMakeOutput.log".

I looked at CMakeOutput.log, & it didn't mention any errors, so I deleted it & ran the 2 failing commands again- with & without the path to the boost libraries defined, & the log file wasn't created again, so I can't consult it for any insight.

Could anyone tell me what to do next please?

I've almost got it working via a ppa, see posts below.

Muse/SoundDAC / Re: ASCAP fees via DAC?
« on: September 14, 2014, 09:21:53 am »
ASCAP = American Society of Composers, Authors and Publishers ??

Yes, that one.

Muse/SoundDAC / ASCAP fees via DAC?
« on: September 14, 2014, 02:22:15 am »
I was wondering if there'd be a way to pay ASCAP fees via BTSX. Maybe something someone could develop.

DAC PLAY / Re: Creating a charity with Bitshares for Cat Shelter
« on: September 14, 2014, 02:19:42 am »
I like the idea. I was thinking about donating a percentage of my delegate earnings to either the local SPCA in my town, or the national chapter of the SPCA. If your DAC contributes to a national organization, ie. Noah's Wish or the national SPCA, I'd integrate its purchase with my delegate node.

Technical Support / Re: How would I do an asset distribution?
« on: September 14, 2014, 01:57:28 am »
Why did you change you handle?

What are you referring to? I registered as FuLl originally. Am I misunderstanding what you mean?

BitShares AGS / Re: Is it too late to buy AGS?
« on: September 14, 2014, 01:55:11 am »
Ok, that's too bad for me. I read it was a great success. Good for you!

I just spent 50% of my BTSX on PTS, thinking later I could spend 25% of it on AGS, but I guess I'll just hold that now.

Thanks for helping me understand this better.

Technical Support / How would I do an asset distribution?
« on: September 14, 2014, 01:52:19 am »

I'm starting a new company, and have created & registered an account in the BitSharesX client for it.

I'd like to issue an asset distribution in the form of tokens to be redeemed for services the company provides.

I see on another thread where the lending DAC is detailing how they'd distribute their currency, & I'm using that as a starting point when I'm determining how to distribute mine. Theirs is:
25% PTS
25% AGS
40% Open Market
10% Development

I don't understand PTS & AGS enough to know what it would mean exactly that I'm dedicating 25% of my issuance to these DACs. Does that mean that I'd distribute 25% of my 'NFS' tokens to these shareholders in a bulk distribution upon launch of my token?

My understanding of the 'Development' percentage is that I'd pay developers working on my company's coding todo list in NFS out of the allocated 10% of the NFS issuance. Is that correct?

I understand that the 40% 'Open Market' allocation means that only 40% of my NFS would be available to buy on the open market.

On the subject of the open market, how would people buy & redeem NFS? Would there be a section created in the 'Markets' part of the BitSharesX client where people could do this? I'm planning on integrating a Magento ecommerce backend on my website, & would like to sell NFS via that using the GoCoin plugin & accept BTC & LTC that way.

I imagine customers would have to run a BitSharesX client with which to receive & manage their purchased NFS. ie. holding Magento/GoCoin purchases, & redeeming NFS to my company's wallet in exchange for services. Is this understanding correct?

Please advise.


BitShares PTS / Which wallet to use for PTS?
« on: September 14, 2014, 01:32:32 am »

I downloaded the BitShares-PTS wallet to transfer the PTS I bought on to.

I was wondering if that's the way to do it, or if I can hold PTS in my BitSharesX client?

Please advise.


BitShares AGS / Is it too late to buy AGS?
« on: September 14, 2014, 01:30:26 am »

I'm new to this, so please excuse me if this is a stupid question.

I'd like to get in on AGS, but I don't see it listed in the 'Markets' section of the BitSharesX client, & I don't see it available to buy on

How can I buy some? Or is it not offered anymore?



Technical Support / pathspec did not match any file(s) known to git
« on: September 14, 2014, 12:27:03 am »

I'm attempting to build BitSharesX on my server according to the instrustions posted on the wiki here:

...And when I try to checkout the source, I get 'error: pathspec '0.4.14' did not match any file(s) known to git.'.

I tried with 0.4.13, too, and get the same message.

What am I doing wrong?


Pages: 1 2 3 4 5 [6] 7