Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - FuLl

Pages: [1] 2 3 4 5 6 7
1
Technical Support / Re: Trying to restore old .json wallets from 2015
« on: September 15, 2019, 10:08:47 pm »
You might be able to pay someone a % to hack it,

I'm not even sure there's anything left in them. So far I've gone through restoring a bunch of Electron wallet seeds for BTC & LTC, hoping there was some kind of then-untransferrable change in there that could be worth anything. I found that they had all been emptied to the last decimal.

I don't remember what was going on with BitShares last I interacted with it. Something tells me that since I had a PTS wallet there might be some of that somewhere, otherwise I wouldn't have needed that wallet. Not sure what the KeyID app is, don't recall anything about that.

I wouldn't be surprised if both these wallets are completely empty. I wouldn't want to promise a percentage of zero & end up owing money at the end.

I find it hard to believe you never wrote it down anywhere at all. Perhaps its stored in hiding place you've forgotten about?
I looked where it would have been, & tried a dozen or so combinations of what I was using back then, to no avail.

2
Technical Support / Re: Trying to restore old .json wallets from 2015
« on: September 15, 2019, 05:47:55 am »
You might need use your 0.9.2 wallet

Well, it would appear that the whole darn thing is moot- apparently I failed to document what the passwords were for these .json files when I exported them.

God only knows what riches are lost...

3
Technical Support / Re: Trying to restore old .json wallets from 2015
« on: September 12, 2019, 07:28:30 pm »
You created the wallet in 2016?
The timestamps on these are both July 2015. Will edit the title accordingly.

Was it version 0.9.3?

I don't have a 0.9.3, but I do have a 0.9.2.
Here's a screenshot of the versions I have to work with:
https://files.catbox.moe/3b32a8.png

Not sure what's relevant anymore since I've been gone so long.

I guess I can try the method you mention using 0.9.2. Will have a look at those links in a little while.
Thanks for your help.


4
Technical Support / Re: Trying to restore old .json wallets from 2015
« on: September 11, 2019, 05:57:45 pm »
Please have a look it that helps

https://how.bitshares.works/en/master/bts_holders/investor_guide.html?highlight=PTS

Thanks, but it doesn't seem to apply.

What I've got are .json files for 2 different 'accounts' I had made long ago using the old BitSharesX client. I still have a Windows Installer for them so maybe I'll fire one up & see what happens.

5
Technical Support / Trying to restore old .json wallets from 2015
« on: September 11, 2019, 12:52:25 am »
I had 2 accounts back then, & still have their .json wallet files from when I ran BitSharesX. The last version I used was 0.4.23.1

If I remember correctly I also had some kind of different token from when I was running BitShares-PTS 1.0.0

I've installed BitShares2-light on Ubuntu 16.04 & none of the options I find there want my .json files.

Could use a hand.

6
Technical Support / Re: Why is BitSharesX so memory intensive?
« on: October 31, 2014, 12:51:03 pm »
After first reindex if you close and reopen it then it uses less ram.

Good to know, I'll try it. Thanks.

7
Technical Support / Why is BitSharesX so memory intensive?
« on: October 31, 2014, 04:19:44 am »
I run Bitcoin, Litecoin, Namecoin, & BitSharesX clients in a VM with 3072MB RAM, & when I run these clients minus the BitSharesX client running, the box uses approximately 1950MB of RAM. When I start the BitSharesX client, it spikes up to using all 3000MB, plus all my 2048MB of swap.

I'm just curious as to what the BitSharesX client is doing that requires so much memory. And will it ever use less in future versions?

8
Technical Support / Re: How to have separate wallets with 1 account each
« on: October 31, 2014, 03:56:25 am »
Being that backups containing more than 1 account don't restore properly, ...
I was curious about this comment. Is there a known problem with running more than 1 account in the client?

See:

https://bitsharestalk.org/index.php?topic=8156.0
wow, thanks. always so much more to know. In that thread, BM follows up on Sep 4 by saying:
"As of 0.4.12 multiple accounts have independent deterministic key sequences so that is less of an issue."
So do you think it is still an issue?

I haven't seen any of the devs mention explicitly that the issue has been fully resolved, so I lean on the side of caution in the meantime.

9
Technical Support / Re: How to have separate wallets with 1 account each
« on: October 31, 2014, 03:39:46 am »
Being that backups containing more than 1 account don't restore properly, ...
I was curious about this comment. Is there a known problem with running more than 1 account in the client?

See:

https://bitsharestalk.org/index.php?topic=8156.0

10
Technical Support / Re: How to have separate wallets with 1 account each
« on: October 31, 2014, 12:06:04 am »
Issue created:
https://github.com/BitShares/bitshares_toolkit/issues/903

Feel free to add your wishlist items here.

Just saw another similar issue, here:
https://github.com/BitShares/bitshares_toolkit/issues/897

Now I feel bad for being redundant.

11
Technical Support / Re: How to have separate wallets with 1 account each
« on: October 31, 2014, 12:04:17 am »
Issue created:
https://github.com/BitShares/bitshares_toolkit/issues/903

Feel free to add your wishlist items here.

12
Technical Support / Re: How to have separate wallets with 1 account each
« on: October 30, 2014, 07:58:49 pm »
Agreed

We should force people initially and on a monthly basis to make backup of there wallet

I think it might be a good idea to set an option to set a path & automatically save a wallet backup after each transaction, with a radiobox to be able to select between 'monthly' 'weekly' 'daily', & 'after each transaction'. This way one of the automatic backup options would always be enforced, & we could change it if we wish.

In my case, I like to have iterations of each backup, & since the 'wallet.dat' filename doesn't change, I set a separate directory for each backup titled with the date of the backup. It would be nice if this feature were to be implemented, if it would allow a path to be set which would change the wallet.dat's containing directory to be named with the current date, within the base backup directory. This so that in my case I can preserve my iterations without losing the previous copy of the backup each time a new backup is created.

13
I documented the process, & for future reference here it is.

I've installed these apps on my system, of course not all of them are necessary to build BitSharesX, but some of them certainly are.
Code: [Select]
aptitude synaptic htop iotop kate chromium-browser git autotools-dev build-essential automake autoconf ntp libssl-dev libdb-dev libdb++-dev libboost-all-dev libqrencode-dev kate chromium-browser cmake g++ libz-dev libssl-dev libreadline-dev qt5-default libqt5webkit5-dev electrum python-qt4 python-pip python-dev python-slowaes uuid-dev libdb-dev zip openssl libicu-dev libbz2-dev libboost-dev zlib1g-dev npm nodejs-legacy qttools5-dev qttools5-dev-tools

The complete set of commands I executed to install were as follows:

Code: [Select]
git clone https://github.com/dacsunlimited/bitsharesx

cd bitsharesx

git submodule init

git submodule update

cmake -DINCLUDE_QT_WALLET=ON .

cd programs/web_wallet

npm config set registry http://registry.npmjs.org/

sudo npm install -g lineman

sudo npm install

cd -

make buildweb

make BitSharesX

sudo cp programs/qt_wallet/bin/BitSharesX /usr/local/bin/

sudo mkdir -p /usr/local/share/icons/

sudo cp programs/qt_wallet/images/qtapp80.png /usr/local/share/icons/BitSharesX.png

sudo mkdir /usr/local/share/applications

sudo cp programs/qt_wallet/BitSharesX.desktop /usr/local/share/applications/

14
Technical Support / Re: Trouble with build BitSharesX GUI on Linux Mint
« on: October 27, 2014, 06:27:04 pm »
I don't know if this would help/work for you, but I just posted the steps that got it running easily for me on Linux Mint 17:

https://bitsharestalk.org/index.php?topic=10604.0

Thanks, this helped.

I was missing qttools5-dev-tools, installed it, all went well with the build, & I'm able to move on through the next step.



One final thing, on my system, I didn't have a dir to copy the .desktop file to, so I had to add a step:
Code: [Select]
sudo mkdir /usr/local/share/applications
Before executing the final step:
Code: [Select]
sudo cp programs/qt_wallet/BitSharesX.desktop /usr/local/share/applications/

15
Technical Support / Re: Trouble with build BitSharesX GUI on Linux Mint
« on: October 27, 2014, 06:16:40 pm »
can you run
    make BitSharesX
again and copy/paste the last few lines here ..

if it doesn't say 100% anywhere there .. there went something wrong!

Code: [Select]
[ 95%] Built target bts_mail
-- Target htdocs directory already exists, exiting...
[ 95%] Built target buildweb
[ 96%] Generating ru_RU.qm
/bin/sh: 1: /usr/lib/x86_64-linux-gnu/qt5/bin/lrelease: not found
make[3]: *** [programs/qt_wallet/ru_RU.qm] Error 127
make[2]: *** [programs/qt_wallet/CMakeFiles/BitSharesX.dir/all] Error 2
make[1]: *** [programs/qt_wallet/CMakeFiles/BitSharesX.dir/rule] Error 2
make: *** [BitSharesX] Error 2
[email protected] ~/bitsharesx $

Pages: [1] 2 3 4 5 6 7