AMD OpenCL Momentum miner

[maddi]

i have 3 r9 280x with 10500 collision.. but i am wondering why i only get 0.70 pts, which is not good..

[Mr305]

I say YES,
because mt.gox is offline the BTC is broken, butI think in a few weeks is going up again. So you need at the Moment 37 PTS for 1 BTC, Bitstamp take the lead I think.
I have 1x HD7870 2GB 1500 CPM and 1x R9 270X 4GB 1900 CPM. Tomorrow I get 2 Sapphire 280X makes ca. 7000 CPM, I jave Money to Invest so no Problem for me, but In Germany the electricity
is expensive. With 10000 CPM you make in 30 Days ca. 33 PTS. So its time to make a lot of PTS. When you have 1 Card, forget everything its Gold Rush. When you have a few Rigs and Money to invest you can make Profit. The Time of the BTC comes, in Berlin is the first Germanys BTC Cash Terminal. You can pay with BTC, but you cant MINE BTC.
Is there another good COIN? Dogecoin, Primecoin I dont know.....

PTS is great I think. Kind Regards from Germany

[maddi]

is PTS still profitable?

[Darkbane]

NaN do you have plans to release more optimized miner for PTS, if yes when it can happen?
Is there possibility to add temperature, fan % and voltages for the GPUs in the miner?

Regards

because voltage regulation is a serious lack in linux AMD drivers and we all know that cards don't need that much volotage to run... even OC... Thanks a lot

http://sourceforge.net/projects/amdovdrvctrl/?source=navbar

allows you to change voltage unless your card is factory locked in which case the BIOS will have to be edited?

Tried but it says that some functions are not supported by either your hardware, the Catalyst driver or the ADL. List of problems: failed to get fan speed infos and Overdrive parameters. Which makes no sense since OD is activated because both cards (r9 290) are OC and works perfectly. Fan speed is also manually adjusted by command. Didn't manage to get the info if the last available version supports r9 cards or Catalyst 14.1 beta for linux... Any idea?

I personally don't know, I run windows, I was just trying to give you an option heh... I'm not sure the 290 series can have the voltage changed without directly accessing the BIOS, and I'm not sure anyone has made a good utility for the 290 series yet (I've seen people ask like crazy but never a good answer)... the 280 and below are cake to modify the BIOS if locked...

[flo2005]

NaN do you have plans to release more optimized miner for PTS, if yes when it can happen?
Is there possibility to add temperature, fan % and voltages for the GPUs in the miner?

Regards

because voltage regulation is a serious lack in linux AMD drivers and we all know that cards don't need that much volotage to run... even OC... Thanks a lot

http://sourceforge.net/projects/amdovdrvctrl/?source=navbar

allows you to change voltage unless your card is factory locked in which case the BIOS will have to be edited?

Tried but it says that some functions are not supported by either your hardware, the Catalyst driver or the ADL. List of problems: failed to get fan speed infos and Overdrive parameters. Which makes no sense since OD is activated because both cards (r9 290) are OC and works perfectly. Fan speed is also manually adjusted by command. Didn't manage to get the info if the last available version supports r9 cards or Catalyst 14.1 beta for linux... Any idea?

[Darkbane]

Should I be running 1 or 2 threads when I use the 270x? Also which algorithm is best for this card ?

depends... do you have a 2GB or 4GB...

2GB use 1 thread
4GB use 2 thread

I've found -a 1 to be the best but some folks say they've tried the others and have different results, so the best thing to do, try each one for a half hour and see which one did best for you...

[Darkbane]

NaN do you have plans to release more optimized miner for PTS, if yes when it can happen?
Is there possibility to add temperature, fan % and voltages for the GPUs in the miner?

Regards

because voltage regulation is a serious lack in linux AMD drivers and we all know that cards don't need that much volotage to run... even OC... Thanks a lot

http://sourceforge.net/projects/amdovdrvctrl/?source=navbar

allows you to change voltage unless your card is factory locked in which case the BIOS will have to be edited?

[AceCobra1]

Should I be running 1 or 2 threads when I use the 270x? Also which algorithm is best for this card ?

[flo2005]

NaN do you have plans to release more optimized miner for PTS, if yes when it can happen?
Is there possibility to add temperature, fan % and voltages for the GPUs in the miner?

Regards

because voltage regulation is a serious lack in linux AMD drivers and we all know that cards don't need that much volotage to run... even OC... Thanks a lot

[kpematop]

NaN do you have plans to release more optimized miner for PTS, if yes when it can happen?
Is there possibility to add temperature, fan % and voltages for the GPUs in the miner?

Regards

[Schwede65]

my R9 280x doing 3650 and HD 7950 OC doing 3100 cpm which i think good but R9 290 OC doing only 3000 cpm, any reason ?
win 7 64bit 13.12 , i tried 14.1 and 13.1 , 13.6 but same.
i tried "a" 0 to 3 but its not gonna change the cpm rate

it's a windows-problem - linux is doing fine with the 290X working at ~4500 cpm
please read a bit more in this thread

[tasheeya]

my R9 280x doing 3650 and HD 7950 OC doing 3100 cpm which i think good but R9 290 OC doing only 3000 cpm, any reason ?
win 7 64bit 13.12 , i tried 14.1 and 13.1 , 13.6 but same.
i tried "a" 0 to 3 but its not gonna change the cpm rate

[maddi]

lets mine until 27. and lets see what happen in PTS rate


I think PTS mining is not profitable now.. In 12hours with 9500 collision I got only 0.29 pts

[Romir]

That happened to me too even with the "correct" hour and minute set because windows was still incorrectly using the default PST.

[NaN]

You have to adjust your system clock.