AMD OpenCL Momentum miner

[NaN]

please try sudo ./miner.sh.

If someone encounters error -1 one should try to execute the miner with sudo.

[marcolecorse]

Hello

New install ubuntu+ Drivers No good

rig@rig-System-Product-Name:~$ ./miner.sh
PPLIB command execution has failed!
ati_pplib_cmd: execute "set" failed!
aticonfig: This program must be run as root when no X server is active
aticonfig: This program must be run as root when no X server is active
*****************************************************************************
** clpts - OpenCL PTS Pool Miner v0.2.2 (ypool.net only)
** by NaN - based on xptMiner by jh00 (clintar's code v1.1)
** If you like this software, please consider sending tips to: opencl.miner@gmail.com
** PTS:  PajuVUWrcPn5ksCFfrBiWQXvpwtE29dcN2
** BTC:  1AumJ5uzz1nuER7pBA6Bh4gNusaxhN85rc
** Your donations will encourage further optimization and development
**
** press CTRL+C to exit
*****************************************************************************

Vendor of used platform (#1 / 1): Advanced Micro Devices, Inc.
error in xptMiner/clInit.cpp, line 96: Method clGetDeviceIDs(...) failed (errorcode -1)

[morecpmplz]

Things seem to calmer with Ypool today.  I've been get disconnected many times last night and the night before.

are the ypool miners getting extreme rejection rates like over at beeeer the last two days?

http://mrx.im/pts.php

looks like in 15 hours from the time of this edit, the difficulty will double on PTS?

does clpts have a 10 second timer on if shares are rejected or not? because with heavy server load it seems to take more than 10 seconds for shares found to get submitted and maybe thats why the rejection rate is so high because its hitting the 10 second timer? just taking a stab trying to solve this issue...

Don't believe so.  Unfortunately CLPTS for YPool doesn't report an overall rejection rate.

[Darkbane]

Things seem to calmer with Ypool today.  I've been get disconnected many times last night and the night before.

are the ypool miners getting extreme rejection rates like over at beeeer the last two days?

http://mrx.im/pts.php

looks like in 15 hours from the time of this edit, the difficulty will double on PTS?

does clpts have a 10 second timer on if shares are rejected or not? because with heavy server load it seems to take more than 10 seconds for shares found to get submitted and maybe thats why the rejection rate is so high because its hitting the 10 second timer? just taking a stab trying to solve this issue...

[battleaxe]

@Nan. I looked at the README and didn’t find any commands to increase GPU clocks and Memory clocks. I tried the cg miner codes but they don't work. Is there something I'm missing? This in Linux/Ubuntu of course.

[NoVaMiner]

NaN,

I get the following with 2.2 running against the 14.x drivers downloaded from AMD under linux (Mint 16/Ubuntu Saucy).

Code: [Select]

*****************************************************************************
** clpts - OpenCL PTS Pool Miner v0.2.2 (ypool.net only)
** by NaN - based on xptMiner by jh00 (clintar's code v1.1)
** If you like this software, please consider sending tips to: opencl.miner@gmail.com
** PTS:  PajuVUWrcPn5ksCFfrBiWQXvpwtE29dcN2
** BTC:  1AumJ5uzz1nuER7pBA6Bh4gNusaxhN85rc
** Your donations will encourage further optimization and development
**
** press CTRL+C to exit
*****************************************************************************

Vendor of used platform (#1 / 1): Advanced Micro Devices, Inc.
Name of device #1 / 1 (deviceID 0): Hawaii


Fee Percentage:  2.50%. To set, use "-d" flag e.g. "-d 3.5" is 3.5% donation

spawning 2 worker threads
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
Connected to server using x.pushthrough(xpt) protocol


Messages during compilation of program for device 'Hawaii':

LOOP UNROLL: pragma unroll (line 162)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 112)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 179)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 169)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 222)
    Unrolled as requested!

WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
xpt: Logged in with cbyter.PTS_1
WARNING: Linking two modules of different target triples: 'amdil-pc-unknown-amdopencl' and 'amdil-pc-amdopencl'
WARNING: While resolving call to function 'New block data - height: 55679 tx count: 19
barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!
WARNING: While resolving call to function 'barrier' arguments were dropped!


Messages during compilation of program for device 'Hawaii':

LOOP UNROLL: pragma unroll (line 162)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 112)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 179)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 169)
    Unrolled as requested!
LOOP UNROLL: pragma unroll (line 222)
    Unrolled as requested!

collisions/min: 3930.0000 Shares total: 0


[battleaxe]

@Nan. I looked at the README and didn’t find any commands to increase GPU clocks and Memory clocks. I tried the cg miner codes but they don't work. Is there something I'm missing?

[Toque]

Things seem to calmer with Ypool today.  I've been get disconnected many times last night and the night before.

Here's a great guide to setup your Cards in Linux.

http://eligius.st/wiki/index.php/Ubuntu_Miner_Guide

[NaN]

That means that the server did not respond within 10s and the miner will try a reconnect.

[wsnnwa]

@NaN - This is the first time I've ran into this, any idea what it is?

[WORKER5] share found: 6494643 <-> 5314636 #12 (2880) @ 1393099429
watchdog timer triggered

[JohnD]

Hey,

thanks for your great miner.

What exactly do i need to mine on Linux?

I am using mainly linux (servers and notebook) so i have no issues with configuring linux but the 290x machine is my gaming pc and runs with windows 8.1 . I want a simple linux installation that runs on a USB device so i can mine at night with the 290x.

[Aalesund]

Hi, tnx for the best gpu miner
can u make version for http://ptspool.com/?
I want to mine in http://ptspool.com/ but can not use the miner.
I'm trying with "-o 112.124.13.238:28988" but can not connect.
ptspool.com also support xpt so you just need to give the option "-o" to select the pool.

[battleaxe]

NaN. I just wanted to let you know that I got it working using your last advice. Sending some PTS your way soon as I make something on this thing. Thank you!

Okay. Now can someone tell me how to overclock this thing in Linux? I'm fine with using the Terminal to set the OC so I just need your commands if someone wouldn't mind helping me.

Use the CGminer Command ,google how use it.

I did. It didn't work for some reason. Man this thing has been so much trouble. At least its working now. But I know my GPU can clock way higher than 945/1250, so I know I could do much better.

[visterln]

NaN. I just wanted to let you know that I got it working using your last advice. Sending some PTS your way soon as I make something on this thing. Thank you!

Okay. Now can someone tell me how to overclock this thing in Linux? I'm fine with using the Terminal to set the OC so I just need your commands if someone wouldn't mind helping me.

Use the CGminer Command ,google how use it.

[battleaxe]

NaN. I just wanted to let you know that I got it working using your last advice. Sending some PTS your way soon as I make something on this thing. Thank you!

Okay. Now can someone tell me how to overclock this thing in Linux? I'm fine with using the Terminal to set the OC so I just need your commands if someone wouldn't mind helping me.