Author Topic: arOpenCLminer - 64 bit - v0.1a  (Read 13710 times)

0 Members and 1 Guest are viewing this topic.

Offline archit

  • Full Member
  • ***
  • Posts: 161
    • View Profile
Re: arOpenCLminer - 64 bit - v0.1a
« Reply #15 on: January 14, 2014, 09:47:09 am »
It's been released now

Offline a17708lm

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: arOpenCLminer - 64 bit - v0.1a
« Reply #16 on: January 14, 2014, 10:04:13 am »
It's been released now

Thank you very much, tested on a HIS 7950 card, got 480c/m. But 1gh.com's mining tool gives  880c/m, my cpu is 2500k.

Offline archit

  • Full Member
  • ***
  • Posts: 161
    • View Profile
Re: arOpenCLminer - 64 bit - v0.1a
« Reply #17 on: January 14, 2014, 10:09:17 am »
It's been released now

Thank you very much, tested on a HIS 7950 card, got 480c/m. But 1gh.com's mining tool gives  880c/m, my cpu is 2500k.

I know it's a bit slower atm but this is the first version, expect some improvements soon nut at least you don't have to wait for hours now to find blocks
« Last Edit: January 14, 2014, 10:12:02 am by archit »

Offline Aalesund

  • Newbie
  • *
  • Posts: 11
    • View Profile
Re: arOpenCLminer - 64 bit - v0.1a
« Reply #18 on: January 14, 2014, 10:45:16 am »
is terribly slow, only 43 coll/min  :o

Offline Drew

  • Newbie
  • *
  • Posts: 8
    • View Profile
Re: arOpenCLminer - 64 bit - v0.1a
« Reply #19 on: January 14, 2014, 10:50:08 am »
Great work.  I am running on 3 r9 290s at about 700 each.  I think possibly utilizing more memory might speed them up?  But please take that as feedback only as this is great.  Once you work out the kinks I will switch all my miners over to this and send a little donation your way.  Keep up the good work.

Offline archit

  • Full Member
  • ***
  • Posts: 161
    • View Profile
Re: arOpenCLminer - 64 bit - v0.1a
« Reply #20 on: January 14, 2014, 11:12:26 am »
Great work.  I am running on 3 r9 290s at about 700 each.  I think possibly utilizing more memory might speed them up?  But please take that as feedback only as this is great.  Once you work out the kinks I will switch all my miners over to this and send a little donation your way.  Keep up the good work.

Thanks for the feedback, how much memory are you using ATM?

Offline Drew

  • Newbie
  • *
  • Posts: 8
    • View Profile
Re: arOpenCLminer - 64 bit - v0.1a
« Reply #21 on: January 14, 2014, 11:18:51 am »
Great work.  I am running on 3 r9 290s at about 700 each.  I think possibly utilizing more memory might speed them up?  But please take that as feedback only as this is great.  Once you work out the kinks I will switch all my miners over to this and send a little donation your way.  Keep up the good work.

Thanks for the feedback, how much memory are you using ATM?

I am using the 1056 option.  But I am unsure how much memory the 1gh is using.  I know on the pts cudaminer I use it only uses 512.  On the 1gh miner I get 1300+ per card, even on a 6990 I am seeing 1100.  Hope that helps.  The machine these cards are in is a 4770k with 32gb of DDR 2400 with 3 r9 290 cards.

Offline userhl

  • Jr. Member
  • **
  • Posts: 24
    • View Profile
Re: arOpenCLminer - 64 bit - v0.1a
« Reply #22 on: January 14, 2014, 11:44:04 am »
I try every configration on my hd 7750(1GB) for 5min.
                      288mb                     544mb              1056mb
AVX               116                           71                     failed
SSE4             105                           78                     failed

Offline sircotra

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: arOpenCLminer - 64 bit - v0.1a
« Reply #23 on: January 14, 2014, 11:47:55 am »
Hi, i'm trying to execute "arOpenCLminer v0.1a" but i got an error: "The procedure entry point clRetainDevice could not be located in the dynamic library OpenCL.dll".

My pc has Core i7 Cpu and Ati Radeon HD6490M GPU.
The system is Windows 7 x64 Pro.
I've installed AMD App SDK and Catalyst's driver from HP because the original Catalyst doesn't work correctly.

Thank you
« Last Edit: January 14, 2014, 02:02:47 pm by sircotra »

Offline -El-

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: arOpenCLminer - 64 bit - v0.1a
« Reply #24 on: January 14, 2014, 11:55:48 am »
With Amd a10 5800k [email protected]:
sse4 63 c/m
avx 49 c/m
using 288 m
« Last Edit: January 14, 2014, 11:57:53 am by -El- »

Offline Aalesund

  • Newbie
  • *
  • Posts: 11
    • View Profile
Re: arOpenCLminer - 64 bit - v0.1a
« Reply #25 on: January 14, 2014, 12:03:55 pm »
GPU-Z shows that 1GH miner uses 880-900 MB. arOpenCL uses 288 or 544 or 1056 MB.
Video card with 1 GB memory can not work with 1056 MB option.
My card is a low profile HD 6510 1GB, CPU AMD FX-8150.
arOpenCL 1056 = failure.
arOpenCL 544 or 288 = 43 cpm
1GH miner = 175 cpm
arOpenCL is 4x slower than 1GH

Offline archit

  • Full Member
  • ***
  • Posts: 161
    • View Profile
Re: arOpenCLminer - 64 bit - v0.1a
« Reply #26 on: January 14, 2014, 03:37:52 pm »
GPU-Z shows that 1GH miner uses 880-900 MB. arOpenCL uses 288 or 544 or 1056 MB.
Video card with 1 GB memory can not work with 1056 MB option.
My card is a low profile HD 6510 1GB, CPU AMD FX-8150.
arOpenCL 1056 = failure.
arOpenCL 544 or 288 = 43 cpm
1GH miner = 175 cpm
arOpenCL is 4x slower than 1GH

It's a WIP, it will get there sometime

EDIT: I have found a potential bottleneck, it'll be fixed soon
« Last Edit: January 14, 2014, 04:29:14 pm by archit »

Offline Mario J. Lucero

  • Newbie
  • *
  • Posts: 5
    • View Profile
    • Heaven Sent Gaming
Re: arOpenCLminer - 64 bit - v0.1a
« Reply #27 on: January 14, 2014, 08:18:47 pm »
Dual AMD 6990
1gh = 1000cpm per core, 4000cpm in total
arOpenCLminer = 280cpm per core, 1120cpm in total

Sticking with 1gh for now, but I'm looking forward to future development.
Hello, I’m Mario.
Cofounder at Heaven Sent Gaming, an entertainment team. We create comics, games, music, novels, video, and web entertainment.
Heaven Sent Gaming's Bitcoin address: 1CgA8NopgG1Sg5rrsBkDo8LcT7wT6r7Z3T | Personal Bitcoin address: 1HWmpwfLu2oo76UVEbGuy2j2mPtF3AMyZK

Offline duckproto

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: arOpenCLminer - 64 bit - v0.1a
« Reply #28 on: January 14, 2014, 11:07:02 pm »
Pulling 381cpm on 270X with 802 on 1GH client - both showing 99% usage at 1100/1500 (gpu/memory) clock speeds.  Running at 47C which is ~15C less than cgminer pushes it to.

Offline renesoft

  • Newbie
  • *
  • Posts: 15
    • View Profile
Re: arOpenCLminer - 64 bit - v0.1a
« Reply #29 on: January 15, 2014, 05:57:17 am »
archit, can you export some GPU configs ( like Intensity in cgminer, etc.. any variables) to config. I think will be good if peoples can try found good params for GPU's.
for example with my 9750 I get only 600 cpm but in 1gh miner I have over 1100 cpm.
you work in great but we like to mine in full speed asap.